Unmasking This Forklift's True Worth: A Deal Or Disaster?
Vložit
- čas přidán 1. 06. 2024
- Use code FABRATS50 to get 50% off your first Factor box at bit.ly/3XYxzW0!
Today we evaluate the "new to us" shop forklift. We haven't quite pinpointed what's wrong with it. Will this deal end up being a deal or disaster? Check it out!
Make sure to follow along with us as we build and fabricate cool stuff!!
We LOVE Onx Off-Road! Get 20% by using code FABRATS20 or click on this link:
webmap.onxmaps.com/purchase/o...
Get your own Fab Rat's Apparel Here:
www.thefabrats.com/
More videos you'll love:
Off The Edge: This Trailer Recovery Might Be Too Much For The Rat Rod Wrecker!
• Off The Edge: This Tra...
Off-Road Roll Back Series:
• Building The Ultimate ...
This Was A Surprise We Never Saw Coming!
• This Was A Surprise We...
This Family Was Stranded With A Broken Truck And Nowhere To Go! Plus Landon's Truck Is Almost Done.
• This Family Was Strand...
Building The Ultimate FrankenTruck: Merging 5 Trucks Into 1 Epic Beast!
• Building The Ultimate ...
We love Barnes 4x4. Check them out!
www.barnes4wd.com/?ApplyPromo...
Check out Fab Rat's Recovery Gear by Yankum Ropes!!
yankum.com/products/fab-rats-...
Use coupon code FABRATS at checkout to save 10% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: thefabrats@gmail.com
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729 - Auta a dopravní prostředky
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
Nice to see Dar again. Hopefully, he can be a semi-regular visitor to the shop. It’s not the same without his presence.
The other day you did the reading comments skit. I loved the Flab Rats one.
You guys should go buy those sumo suits and do something "creative" as the Flab Rats. Do it for charity, it will be hilarious. Destroy those trolls with their own words.
Nice seeing Ben again in these older videos.
Good to see Ben carrying his weapon. I'm from rural New Mexico and I carry mine everyday as well.👍👍
I'm in abq and its necessary
Yup here from Farmington I always have mine with me too, agree especially ABQ you definitly need one
Looked like a revolver too. Love some old school swag.
Try that in a small town...
@@christopherwedemeyer2993 agree 100%
Love how Ben remembered the mechanic lore of you will get it after you hold your mouth right. And the fact he is packing heat, I have 3o years of truck driver, operator and mechanic in Alaska and I'm ex-law
enforcement you need heat for two and four legged predators always ad you enter into all types of situations, you never know when you need it!
do you think he is a wheel gunner or a semi auto guy
I enjoyed the bluegrass background music during the long mechanical run.
It looks like Ben is packing heat1:40. Way to go Ben !
Damn man Ben is packing!!!! Good stuff Ben!!!!
For any live quagga mussels!!
The bronco looks awsome in the background.
Of course the earplug works, now you can't hear the leak!
You win the internet. 😂
Exactly
😂🤣😂
Ben you're my hero...is your gun a revolver like a SW Chief? Way to go...you guys are my hero's
0:26 YEEEEEEEEEESSS!!!!! I’m so happy you guys accepted! BRING THE HEAT! 🖤💛🖤💛🛞🏆🔥
Best line of the day "This better be what's wrong with it" !! HAHAHAHA been there done that. Great job you guys!
And there's the scammer.
Great video and we get a glimpse of the elusive Papa Dar! Always good to see him.
Paul: Is that where it needs to go?
Ben: Yeah, probably doesn't matter.
This is why I love this channel
It's great to watch Ben work. He does a great job!
As I was watching l started thinking about Papa Dar and wondering what was happening with him. Then he shows up out of the blue. Great to see him again. Good job guys...as usual.
Haven’t seen that Bronco on the channel before but I instantly love it. That’s coming from a guy who’s only owned GM
I'm also wondering about the OJ bronco to as another gm guy
I'm a ford guy I damn sure seen it
Definitely not a Ford fan but that Bronco is nice.
Ben seemed totally at ease working on this big ol' Cat engine.
That's a LITTLE cat engine comparatively...
And it's a perkins
Nice Blue Grass, was not missed ! God bless you and your family amen and aloha
I love you see you guys giving new life to these old dogs while joking around having a good ol time
Everyone seems so genuinely happy while working.
Nothing gets out of the shop without Paul welding something on them. I don't think Paul can get thru a day without welding on something whether it needs it or not. I bet he is his welding and metal supplier's best customer.
An empty shop is a good opportunity to seal the cement with some sort of product. You don't want to overdo it and make a slippery ice rink in there but a decent cheap utility sealer will help with cleanups and protect the cement, make it harder for stains to go deep etc. Dunno if you guys already done that. An excellent cement protectant is engine oil, hydraulic oil, and diesel fuel, so you're well on your way there, but you might consider using a more clear solution that comes out of a container that says cement sealer. Databyter
Something I have been doing for decades when I know I am going to tear apart something, that is not going right back together, is to draw the same shape and poke holes in cardboard and put the bolts in order just makes finding the right bolt easy.
I laughed when Ben pulled out his pocket rocket (small screwdriver) every good mechanic knows to always have 1 on hand, every day you will need one at least 5x. Next to having a pen when working flat rate, it's your most used tool.
would love to see the bronco in more detail on a video.
Y'all simply amaze me at the things that you can fix without truly knowing much about it. To me that is a true mechanic ! None of you are afraid to jump in to a project feet first and tackle anything set in front of you.
Thanks for sharing your adventures and knowledge with everyone to enjoy Folks ! Stay Safe and Bless Y'all ! ✌️❤️🙏
Ben is a skilled mechanic, and Randell seems to have turned wrenches at some point, and Paul well he fabs and turns wrenches, fairly well, except maybe transmissions😂😂
Once you know the basics its all the same. Nowadays with youtube and google there is no reason to not fix yourself.
I go by, "if you can take it apart, you can fix it".
So we get it. Your wife can't handle the cooking so Michelle will just put it of on someone els Pall
Still love the videos though
So glad to see that you picked up a sponser! I am serious when I say this what I say next. All of you your entire family deserve to have 1 million subscribers and I do my part by sharing your videos online with Social radio and with friends and family. And I really believe in hitting the thumbs up button I just wish all the other subscribers would do it every time they get on one of your videos.
i love this channel but eh, chill bro lol
I won't feel bad if I do not hit a stupid like button
I'll still watch the next video if I feel like it, this is what youtube is all about
At 4:54 Ben seriously looks like MATER. It's so funny! Love our Fab Rats!
Ben, is that a gun on your hip. Or are you just glad to see us. Good for you, I'm a fan.
Ben making it happen exercising his 2A rights by PACKING today! Way to go BEN! How about a little peak at what you carry Ben?
Looks like a wheel gun.
I was going to ask the same question. Compact 9? Maybe a Shield?
@@3xpiano No it is a revolver.
It's a concealed carry... It's not a 2nd amendment right... you have to go get a permit. Rights do not work like that...😂
@@16driver16 Wrong Skippy, lots of states have constitutional carry, no permits or license required, Utah is one of those states.
Matt, Robby, Rudy, Chad and the others are good. But Fab Rats, one channel to rule them all. 😁
Yes I was thinking the same.
I came to fab rats via matts but only watch Fab Rats now
Trail Mater Rules Them All -----> Rory, Shawn and Mike ( Lilly )
i only look his videos partly. it hurts his statistic a lot. and most time he get a tumps DOWN.
@@DanP001 what? speak english.
It's a great day when the Fab Rats have a new video on there CZcams channel. Great job. How does it feel to work in the new part of the shop add on. Can't wait to see more updates an projects and many more videos soon Rats. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. God Bless.
Nice work! Usually the timing marks things like gear driven water pumps and oil pumps are to help with balancing them in tune with the rest of the engine. Help cancel out some vibration and also increase service life a bit.
That Bronco is sweet!
Alright Ben! Ben’s packing, good for you!!👍👍
Yet another great episode! What's the story on that sweet Bronco?
You guys should get a plastic kiddy pool to catch fluids under vehicles.
Good to see Dar again - where's he been?
Thank you, I operated the zoom boom on construction sites loaded roof trusses moved lumber they will help you guys out with moving stuff around they sure can be handy when moving things around try to bring boom in before moving especially 30foot in the air and they do get stuck
I have heard them called a Telehandler also
Lol, I work in industry as well they are always called zoom boom's. Its slang but hearing other slang for them is weird.
My respect level for Ben just went to 200%! He went over that engine like he knew everything about it and the fact he is pro 2a!!!!
6:52 “we don’t need no stinking badges” - Blazing Saddles, Love it!!!!!
You say thanks for watching...I say many thanks for making these fine videos for us to watch..God Bless
Good morning in my opinion that Forklift was definitely a good investment.
I am looking forward to the 24 hour to hell and back with the FJ I think it will do really well. I know the video or videos will definitely be fun to watch
Just reported a spam comment trying to look like fabrats saying someone won something here fyi to all
You guys work so well together! 24 hr. Hell and back will be fun to watch! Ben got his CCW! That's his right. Til next time, take care, and we'll see you on the next...
Does Utah require a CCW? In my state the law was repealed in 2021 no longer required to have a permit to conceal carry unless you are leaving the state and need the permit for reciprocity.
No. Most of the Free states are Constitutional Carry for now. We must drive out the liberal vermin before they destroy liberty!
😊
Really, I don't think you need a CCW to carry! The constitution says we have the Write to bear arms.
@@kimetherington2252 Correct but not the right to conceal them. Unless your state has a specific law. You can open carry all ya want according to the constitution.
Ben keeps that Billy western on him I agree
I operated a TH36 from new in the early 2000s, it had the same issue within weeks of being delivered. CAT came out many times and tried many different fixes, new pumps and lots of adjustments, but the problem always came back. Other then sounding like it was hunting for fuel at idle it didn't hinder the performance of the machine. We were hard on that machine and it ran for years like it, hopefully 20 years down the line they have a permanent fix for it.
Love the channel, keep up the great work.
Love the channel guys : I find that channels that get too polished and start setting up scenes too fit their agenda, we all know when something looks fake it usually is. I hated to do it but my family and i stopped watching a certain channel because of this, we love the friendly banter when you guys get on it, its mostly family that work and play on here and at the end of the day you just can not beat that. Respect !
You guys are awesome. I don't care what anybody else say about you guys, haters will be haters. You and you're group of friends are the reason (other than Zion) why I've been planning to move to Utah.
I've never seen a single hater... This is news to me.
Who's white Bronco? Its super clean...
Good stuff. Nice to see Ben rolling Armed. Glad one of you are. Too much money in there not to.
Another cool video always enjoy the content never disappointed. Some of the comments about Ben carrying lol most people i know do. Utah is a Constitutional carry State pretty sure most do
I'm not sure why all the comments about Ben caring it is America and it is your constitutional right to carry especially these days
@@Jumpersplacesieg hiel right?
You guys all work so well together.
It's their Mormon Life Style .. makes family and friends most important! :)
A lot of that is just the editing. :)
I'm sure they clash more than they would like to show.
@@calholli possibly! .. I'm sure they want to present their best side on the net :)
Good, wholesome entertainment. Thank you.
1:48 glad to see that you guys have CCWs👍🏻🇺🇸
Y'all did a good job getting that fixed all in the video I notice it was a nice bronco sitting back here now that you got that fixed and out of your shop you can get the Jeep in there can't you you know Michelle's a wonderful woman she always fixing you something to eat and she has your back it's time for you to fix our Jeep and take her on a date lol
What did I win
@@snowboycalli116SCAMMER
Good morning Fab Rat Community. Time to grab a coffee and enjoy!
No kidding!!!! YAY!
Nice OJ Bronco just outside the door!
HEY! Good morning everybody!
Looks like Ben carries - good man!!!
Great job and a team effort! Even Hunter did great camera work! Eddie
😂 ben's face as he's pulling out the exhaust! like he was delivering a baby 😅
My dad, most of my uncles and both of my grandfathers were mechanics, I worked as an automotive and aircraft mechanic when I was young, I want to thank you for reminding me how lucky I am being an ELECTRICIAN!
5:37 nice camera angles.
Ben's got bulges in all the right places lol. Y'all are my kind of people, thanks for the videos every week.
I just noticed Ben was concealed carrying, good job Ben! Now you just need to work more on the concealed part.
Did notice too!
Have you noticed Matt's right front pocket? S
Shhhhhhh
Utah has constitutional carry I carry mine on my belt all the time
Conceal part is fine he is bending over at work lol
I am a retired Chef, so my Wife & Mother in Law eat like Queens and I still get to do what I Love so no Factor meals for us, but not everyone has a Personal Chef like Me at Home
Ben, you need a good leather holster that is broken in well. Nylon tends to fit up on the gun to tightly making it hard to deploy.
It doesn’t fit too tightly, it’s just inconsistent because it has no structure. It also will wear a gun finish more because the gun is floating around more freely and rubbing.
I’m so glad you all are doing the 24hrs of hell and back. This is going to be an epic one for sure
Is Ben wearing a small revolver in the beginning. If so I salute you.
You beat me to it. Looks like a small semi to me. Okay, let's see who can guess the make and caliber. I'll say some compact 9mm. S&W M&P 9mm (since its probably the most common one).
Definitely a sig guy subcompact 9mm. Although looking at the holster it’s probably a .357 mag snubby
Nice phone case, lol 🇺🇲
Everyone should be
I’m with you, the look of the muzzle says wheelgun to me. 🙏
Ben's packing HEAT.
Stay strapped Ben. We seen that.
Bens packing a gun! Heck yeah!
Wouldn't you carry if you never knew who or what is coming through the door? Makes sense to me
@@delbutler885 I do!
Ben with the side arm, love to see it !🇺🇸 LETS GO BRANDON !!
Ben's packin' heat? I'm lazy about concealment, too. I call it "Obvious carry." 😂
What kind of commentary is it that with all the movies and tv “entertainment” out there i would rather spend time watching a couple of guys fix a broken tele-handler than ANY of the other crap out there!
YOU GUYS ARE REAL….THAT IS THE DIFFERENCE HOLLYWOOD!
I gotta suggestion for y’all when your taking a complicated cover off like that. Get yourself a paint pen and mark the top bolt with a paint pen. Get a cardboard box and as you take the bolts out start with the one you marked and go in a clockwise direction. Poke the bolts in the box and vwala you know what order they go back in. K.I.S. (keep it simple)
Good work though. Always happy to see all those projects come to life!
Hey Ben I see your wireless hole puncher
Good to see I’m not the only guy that has mine even when I’m doin dirty work lol it’s always on me even with friends
Please tell Ben he needs a better holster. Maybe kydex or leather. But overall good job guys, love the videos.
Yes, yes! Get a decent leather holster for that revolver!
Look at the wear on that holster, he's obviously been using it for a considerable amount of time.
It obviously works quite well for him, why replace what you like and what works?
Long time
Dar back onsite. I knew it would start once I saw him. He's the heavy equipment whisperer.
DAr still got to make a living, glad he's able to pop up in video every now and then
The food might be good when you get it but if you’re nuking it in a microwave to cook it you’re just killing all the nutrition in it love you guys videos
Believe that is a myth, if true for microwaves, it'll be true for other types of cooking, which is not the case.
@@johnhpalmer6098it’s not a myth.
Isn't a microwave just a convection oven? How does it kill the nutrients?
@@jessefraosharecordablecari6329 No, the microwave is not a convection oven, that is a regular oven with a fan to circulate the hot air around.
A bit if a brief research is that any heating apparatus that cooks food will reduce some vitamins from foods, like vitamin C, but not exclusive to the microwave.
That said, does it mean cooking veggies by itself is bad? Far from it but the article did say that boiling can leach out the most of the water soluble vitamins of any cooking method however.
@johnhpalmer6098 Right on appreciate the information. I personally do not own a microwave. I primarily eat only meat cooked on my natural gas stove or my charcoal grill. So there's never leftovers for a microwave plus I never liked the taste of "nuked" food. I definitely understand cooking off some nutrients. The gentlemen stated "all" nutrients. Neil Tyson went in depth about microwaves and it was pretty interesting. My taste for him plummeted due to his vaccine stance. However the microwave thing was worth a listen. Thank you for your information.
I always knew Ben was a F$ck around and find out kinda guy.
🍻🤙🏻
I wasn't aware we had to obfuscate fsck.
@@stargazer7644Some people just prefer to bleep themselves whilst retaining the obvious meaning, no reason to call someone out for that.
@@_Kirby207 Except he bleeped his bleep.
I'm convinced that Ben can fix anything!
Good morning from Wisconsin
Looks like Ben is packin a mystery mousektool. Never a bad idea to have that thang on ya.
Gotta love working on those teles
Hunter please show us Ben’s hand Gun looks like a good piece 😅
Did everyone miss the fact that Ben is packing a pistol when they were taking the pump off. Well it is UT, if you enter that state without a gun, they give you one.
Isn’t freedom wonderful?
No, so far 735 people have commented.
Including one snowflake in his mommies basement saying "gun bad"
Ole Ben with the conceal n carry
Whoa! Whoa! WHOA!!!! What's up with the BRONCO parked outside the shop?!?!?
Awesome, Ben! Good to see another 2A brother!
Good to see papa Darr
I really like the Bronco in the back ground
Another good video thanks. Best part is that you Paul where able to do this with your son.
The shot of Ben at 4:55 should be on one of yall's shirts!!!!!
No harm intended. Ben reminds me of the Gopher off of Cady shack when he smiles.
I see now why Ben likes the button-down shirts. They cover up that pistol on his hip better.
Ben packing that heat way to go!
11:24 Ah, the joys of being a good welder --- you can take some fragmented item and stitch it back together as good as new! :D
Beautiful bronco in the background!
We have been using Factor for about a month. We have tried several food prep brands, This is by far the best. The food bill went down substantially and there is no waste with leftovers. Well worth trying.