WODshop Callus Remover Available Here: www.wodshop.co... Here we demonstrate how to replace the callus remover blade by removing it and taking it apart. Then we and assemble it back together.
Thanks for uploading this. I tried everything to try and release the old blade. I got to the stage where I was going to throw it away and just buy a new one. You saved me the cost, thankyou.😊
thank u sooo much, I bought mine from CVS and I took it out my box and it fell apart. I was going to bring it back cause I thought it was broken, you saved them a cuss out and saved me an embarrassment lol... thanks 😉
Thank you! This is not the same brand as mine but it's manufactured just like it! The directions they gave me didn't make sense! Thanks again! Just subscribed! 😁
Hey Dude, If you had googled any of the websites for the product manufacturer, You will find that you are supposed to use your RH thumb to pull and push the tab of the back plate that comes thru the holder, the only time you use your left hand is to catch the back plate and blade in your palm when you release it, and to squeeze with your thumb and index finger the back plate against the holder, That way you will never get cut.
thanks for this. i actually was able to figure this out myself, however, the blade part won’t stay on. every time i use it, the blade keeps sliding off. obviously i’m doing something wrong. anyone have any suggestions?
A question please, I just bought this tool-(The same one), do you have to remove anything before I use it, because, It has a yellow film that notes SOUGEN on it, is it ready to be used or do I have to take it apart first, to start using it? Thank you.
I've watched a few of these videos and nobody explains where the blade is supposed to be and where you're supposed to cut the callus from. It may seem like it's common sense I get it but the way mine is going together it makes absolutely no sense whatsoever where is the cut skin going to go it can't go under the blade this is a really poor design
@@lindaberry4374 so here is whats up: take a fork or something, and put it on top of the tab and press towards the handle. They are super tight out of the box. I cut the living hell out of my self too.. thats why I recommend a tool. OR flip it over, and grab the edges and slide them down...
Wow, I struggled for an entire afternoon and still didn't get it. I decided to search CZcams and I got it in 10seconds. Thanks!!
Thank you so much for posting this! I had no idea how to put it together until I saw this!
Quand on est bête,c'est pour la vie!
@@Stephaniexo mariepol was obviously talking about himself.
I was lost when i bought this. Thank you
Thanks for uploading this. I tried everything to try and release the old blade. I got to the stage where I was going to throw it away and just buy a new one. You saved me the cost, thankyou.😊
Thank you for the video I bought one that had no instructions.
CZcams is Awesome 💜
Even though this is an old video I'm so glad it helped me 😂😂 since I put it together upside down with part that slides on 🤦🏻♀️🤦🏻♀️
Thank you for posting! I couldn’t figure out how to disassemble mine
Thank you for this video . I'm pretty sure I threw away my instructions and had no idea wtf I was doing until you explained it step by step . 🙌😎
I felt stupid trying to put this together. Thanks!
Who is still looking this up in 2019 at 12:30 in the night😂😂😂my husband drinking tea n wouldn't even assist me..thank you so much from mellisa
واخيييراً لقيت مقطع يشرحها😭❤️ شكرا
Is at here for 20 min trying to figure this out 🙄 10 seconds after your video I was good to go thank you ☺
Thanks for the vid, my simple mind could figure out how to disassemble and there were no instructions on the package. :-)
Thanks for that. I tried every way except the correct way.
Thank you for this video! I've had the item for months and couldn't get it to until now!
thank u sooo much, I bought mine from CVS and I took it out my box and it fell apart. I was going to bring it back cause I thought it was broken, you saved them a cuss out and saved me an embarrassment lol... thanks 😉
Portuguese_Lx Leena hi
lol @ saved them a cuss out
Thank you so much! I was able to fix my tool in second with your video,👍
Thank you! This is not the same brand as mine but it's manufactured just like it! The directions they gave me didn't make sense! Thanks again! Just subscribed! 😁
Thank you so much for your time It is much appreciated.
Muchas gracias, exelente explicación 👍🏻👍🏻🇵🇦
Thank you! I was really struggling to remove the blade
Thank you, I did not know how to use this tool-lol
Thank you, I was getting frustrated.
ABSOLUTELY ! ... l was past frustration 😤 ... l had to get a new 1 ... Wish i looked here 1st , now i know ! ... Thanks 👍
Thank you. I was afraid of mine but not anymore.
Hahaha thanx soooo much I almost broke it trying to get the blade out
It was a must that I subscribed u
Thanx all the way from oz 🇦🇺💗💗💗💗💗💗🇦🇺
Very helpful, thanks...God Bless us all in Jesus' Name
Great instruction Thank-you
Thanks I had it backwards 🤷♂️🤦♂️very helpful video 👍🤗
Thank you 😊 so much I was my moms and I wanted to use it and than it broke so thank you so much ☺️
It was very helpful, thank you ♥
Hey Dude, If you had googled any of the websites for the product manufacturer, You will find that you are supposed to use your RH thumb to pull and push the tab of the back plate that comes thru the holder, the only time you use your left hand is to catch the back plate and blade in your palm when you release it, and to squeeze with your thumb and index finger the back plate against the holder, That way you will never get cut.
Thank you for stopping me from losing my fingers ❤️😂😂
Thank you - really helpful. :)
Thanks for the help
Thank you almost gave up!!
Awesome! Thanks!
thanks for this. i actually was able to figure this out myself, however, the blade part won’t stay on. every time i use it, the blade keeps sliding off. obviously i’m doing something wrong. anyone have any suggestions?
Okay life saaaaver😍😍
Thank you 😃
Thank u so much! 🌺
Oh my gosh. Thank you so much!
Thank you. I should watch this before try it and cut my self. I was cutting my callous and the balde pop out !
Thank you
Thank you very helpful!
Thank you!!!
wow thank u so much
Thanks😃
Thanks!
Many thanks. I would be almost desperate.
thanks a lot
Thanx a lot 😅
Thank you so much.
Just got mine. It had ZERO instructions! This helps a lot.. I had it backwards. LOL
I got one and I can’t get the back plate to move up I need help
OH MY GOSH TY!
شكرا
Illegal in some states. if your nail salon offers this service, run.
Gracias¡
Thank you so match
Thank u
Absolutely 👌
God bless you
Thank you!!!!!!
Thnks dear
Thaaaaaankkkkkk youuuuuuuu
I by mistake put it on upside down. It's not coming out. Can someone help please ,😞
Can you show how to use it
Top
Thank uuuuu soooooo much😘
Yeah my feet have really thick skin and bad calisis so I need to just razor blade the skin thanks
Thank youu
Informative video. Can i refer you to a chiropractic directory with over 1k members to publish your video? No charge
Thank you so much! The paper instructions were not helpful.
A question please, I just bought this tool-(The same one), do you have to remove anything before I use it, because, It has a yellow film that notes SOUGEN on it, is it ready to be used or do I have to take it apart first, to start using it? Thank you.
Please tell this machine name
Oh I just notice, my callus remover is a little different from yours, I have a Sougen; the middle part is different-oops.
I've watched a few of these videos and nobody explains where the blade is supposed to be and where you're supposed to cut the callus from. It may seem like it's common sense I get it but the way mine is going together it makes absolutely no sense whatsoever where is the cut skin going to go it can't go under the blade this is a really poor design
Consegui naoooio
I have the Merkur I CAAANNN NOOOOT get this thing apart!
Me neither cant do it even watching video makes no difference i even cut my finger trying to assemble it what on earth am i doing wrong ?????
@@lindaberry4374 so here is whats up: take a fork or something, and put it on top of the tab and press towards the handle. They are super tight out of the box. I cut the living hell out of my self too.. thats why I recommend a tool. OR flip it over, and grab the edges and slide them down...
About as clear as mud. Still can’t do it 😡
O
THANK YOU! You’re valid 🥲💕
quto
Thank you😊
Thank you 👍
Thank you
Thank you so much
Thank you so much!!!
thanks a lot
Thank you 😘
Thank you.
Thank you.
Thank you
Thank you
Thank you
Thank you
Thank you so much!!
Thank you