Dual-Mount Wall Bed Assembly Guide Video
Vložit
- čas přidán 2. 08. 2024
- 0:00 - Intro
0:23 - Tools needed
0:27 - Bed cabinet assembly
6:33 - Anchoring bed cabinet to wall
10:36 - Dual-mount wall bed mechanism assembly
15:24 - Metal bed frame assembly
22:30 - Horizontal metal bed frame adjustment
23:44 - Dual-mount wall bed mechanism installation
25:40 - Piston and metal bed frame installation
29:45 - Vertical metal bed frame adjustment
32:21 - Installation of wood slats and kick plate
35:00 - Installation of facades
39:55 - Securing of facades and top front board
42:14 - Optional storage cabinet and drawer installation
45:07 - Important notices
45:25 - Parts & hardware
45:38 - Masonry installation - wall anchoring
45:56 - Wood floor installation - floor anchoring
46:03 - Warranties, customer service & maintenance - Jak na to + styl
Thanks to this video I got a better understanding on the process and completed the entire bed and side cabinet and drawers in a few days by myself.
Put this Queen Murphy bed together...took me (6) hrs to complete with no issue! 🎉
If my ceiling height is slightly too low, can I modify this kit to fit?
We are assembling now. The corner brackets and the part against the wall do not line up. Part # KI-7652-W-21 AND KI-7652-W-1. The the flat warning panel would need to point down. It is likely welded to the wrong side. Please advise. We are considering drilling new holes. PLEASE ADVISE.
I have the Claremont. Which has 3 front panels.
When I am moving the bed in the up or down position.
I see the left and center panels are separated and bowing out.
I don’t feel comfortable with this!
Is there something I missed?
Also , when the bed is closed I need to pretty much move the panels to the center.
And still have issues with the open space on both sides.
Hi! thanks for the video! how long did it will take for 2 qualified people installation? And how much? thank you
I'm having hard time mounting the metal frame into the bottom wall. Are the screws supposed to go in at an angle? Also for the floor mount, is it okay to drill the holes through the carpet?
why there are no instruction for assembling drawers?
Bonjour
longueur des vérins et sa puissance newton svp?
Merci
Cordialement
Where and what are we marking the bottom of the wall for at 23:11?
Question. On the vertical bed frame adjustment my bolt doesn't touch the frame to provide any kind of adjustment. Any tips?
Reverse the front bar. It has 2 settings. I had the same issue and reversed the bar and the bolt now hits the bar for adjustment
This issue is the reason I am watching the video.
@@davidwiseman3724 Yes, I am having this same issue. The instructions are saying to use the larger braket, but the video shows using the small bracket for this assembly. Tried both and reversed bar, still doesn't line up correctly.
We built the bed & are happy with the quality. We are not happy that when the bed is down, it is about 1 ft away from the wall, so there is no 'head board' to sit up against & pillows constantly fall off the bed
Any ideas?
I have the same issue.
@@shek9 Bestar, do you have a solution ?????????
We ordered one of these and they got damaged in shipping twice.. also you need to understand how long this is really going to take(15-20 hours) and how stupid heavy all the boxes are.
Ok
We are installing this bed. The bed doesn't want to stay down. Gas springs want to force the bed closed. I notice in the video one of the workers is holding down the bed. How is it suposed to stay down?
Hi, thank you for your question. It is normal that the metal bed frame does not stay open during the installation. Once the wooden slats are on and the mattress is secured, the weight of the mattress will keep the bed open (mattress weight requirements vary per bed size, please follow the specifications found in the assembly guide).