Mylaps X2 Transponder Troubleshooting

Sdílet
Vložit
  • čas přidán 29. 10. 2020
  • Shows the Mylaps X2 Transponder in Rechargeable mode and how the lights should react when the transponder is working or not working. Describes the techniques to correct a problem in the transponder.
  • Zábava

Komentáře • 19

  • @jamieniblock3917
    @jamieniblock3917 Před rokem +1

    Thanks! Changing the cable saved the day

  • @rgamezdelgado
    @rgamezdelgado Před rokem

    SUCH a helpful video!!! I tried all other trouble shoot from website and non helped, but your video saved my mental health! THANK YOU!!!!

  • @gaz6060
    @gaz6060 Před 3 lety

    Really very helpful video buddy. Had some problems with my transponder not working on my first race day few weeks ago and your trick of bending the little prongs on the race key has worked a treat. Thank you!

  • @murrayb7919
    @murrayb7919 Před 2 lety

    This video got my transponder charging by bending the prongs. THANKS!!

  • @aarongrace2376
    @aarongrace2376 Před 4 měsíci

    My race key is blue while plugged into computer while trying to reload my subscription which I already paid for. Not allowing me to activate the transponder, no idea why the race key isn’t reading 😊

  • @Barriosanguizolahora
    @Barriosanguizolahora Před 2 lety

    i just opened a new X2 car/bike and though it was defective but it was the usb cable provided not working

  • @lukemayers3477
    @lukemayers3477 Před 3 lety +1

    With a hardwired X2 transponder, when the power is turned on the racekey goes through its startup sequence and then blicks green then goes out. The transponder blinks red 1 per sec. Is the transponder working? I thought it was supposed to be green.

    • @neemafastcat
      @neemafastcat  Před 3 lety

      That is a good sign. Blinks red slowly till the internal battery is fully charged. Even though using Direct Power, the internal battery gets charged when you power up.

    • @neemafastcat
      @neemafastcat  Před 3 lety

      YES, With the latest firmware updates, when you power on the direct power, the light on the stem of the transponder will blink slow red until the internal battery of the transponder has a full charge. Full charge is not needed for Direct Power and your transponder is immediately transmitting a signal.

  • @fxtonka
    @fxtonka Před 2 lety

    What does the subscription give me

  • @ChrisGroverRacing
    @ChrisGroverRacing Před 2 měsíci

    My X2 racekey is steady red, what does that mean nothing works to fix it

    • @neemafastcat
      @neemafastcat  Před 2 měsíci +1

      Three Red Lights are an indication of a failed Race Key. You can try to use a different USB cable but 90% of the time, this indicates the Race Key has failed. Have to borrow a race key from another racer to get through the race.

  • @Mason-xx3dp
    @Mason-xx3dp Před měsícem

    In the MyLaps Connect It says Race key Defect I have bought a subscription but whenever I go to my Laps connect it says RaceKey Defect the first light is green middle is orange and the end is flashing red any idea if I can fix this?

    • @neemafastcat
      @neemafastcat  Před měsícem +1

      That is a failed Race Key. See if you can borrow a key from another racer or contact mylaps to see if that transponder is still under warranty. If you have kept a subscription going, Mylaps will replace it with the new TR2 for free.

    • @Mason-xx3dp
      @Mason-xx3dp Před 21 dnem

      @@neemafastcat ok thanks so much save me a couple hundred buying a new one

  • @jonathandevine3533
    @jonathandevine3533 Před rokem

    Yes, very helpful. Thanks

  • @Pontus95x
    @Pontus95x Před 3 lety

    what if my middle light turns orange? what does that mean?

    • @Pontus95x
      @Pontus95x Před 3 lety

      number 1 light is green, middle one orange and last one blinking red, all while the transponder is blinking red quickly. But if i log into MyLaps all 3 lights turn blue instead

    • @neemafastcat
      @neemafastcat  Před 3 lety

      Sounds like you may need to add more time to your subscription then run the Mylaps Connect software to reprogram the EXP DATE to your transponder. Once done, that center light will be green. When you are logged in, all lights will turn blue, like you mentioned. That is the norm.