You just answered every question I've had for 3 years about my oak kitchen cabinet possibilities. Thank you so much for including all steps and making it simple. I want to strip varnish in motion cabinets for natural look and paint top ones lite paint. Now I know exactly how to do that!
Definitely liked that finish with the black in the grain. I’m rewinding the video to get to that part again since I am in the process of doing this at home, so might add that step in between!
You’re most welcome, hope you enjoy the process, let me know if you have any questions, follow me on Instagram and send me questions if you have any along the process
I like the process you showed very clearly and one thing I learned is if I wanted to make something using the white and grain...i would not use the black pigment since it is a strong contrast.. but rather a medium gray pigment maybe and i think that will give the cabinets a beautiful and subtle antique look! Thanks again dude
Great video. I've watched a ton of these in preparation for attempting this process, and the one bit of advice that stands out in this video is to have a finished control piece next to your work pieces to help ensure a consistent look.
I really like how that navy turned out. I just might do something like this in the new house we are building, so tired of all the same old white cabinets I do for everyone.
I like to grain fill oak using aquacoat. The grain filling gives you a very smooth finish. It will never look like clear maple, but it will look very updated, and you'll only know it's a refinished oak cabinet when you are really up close because the grain does not pop out.
@KonstantinUdalov I don't know ow what you mean by brutally filled. Aqua Coat is very thin. You apply it and then sand it. It closes the pores of the oak and help build up between ridges. When you spray over the filled door, it looks very smooth. I did this in my old house. I could have purchased maple doors for $40 each or just put in a little work to keep the doors out of the landfill. Quite honestly, it's about the time and effort you are willing to put in.
@@AP-ph7hf wooden doors can be recycled not thrown in the garbage . time/vs money it's probably the same +/- but new shakers maple or mdf are made to be smooth. Oak is oak.
@smon8497 so aquaculture fills the pores so that you get paint that lays flat where there is grain. It is not a brutal fill. It is applied with a thin flexible piece of plastic. Try it some time. It will give you the professional results you aren't achieving because your preparation is lacking.
Hi Giselia 😊👋 love your comment ! Honestly I would replace doors on all the oak kitchens with new mdf doors . But this technique is something that very few people are obsessed with . So I tried to help them with the tips and tricks I got on this
Hi Konstantin , thanks for your information of how to finish old cabinets doors , they look beautiful Can you please show us how to get rid of the wood grain on the cabinet doors to make it smooth and flat . I really do appreciate if you do so , thanks!
Hey buddy. From my experience it’s not the best to do so. - if you really need to get rid of the grain - I’d replace the doors with new smooth mdf doors and fill the grain on the cabinet boxes (just apply grain filler or wipe on white filler and sand flat )
Thanks for your video. A lot of people are now redoing their kitchens this way. It's becoming more popular. Noticed there's a few disapproving trolls. Allow people to redecorate as they wish. Be kinder.
Great video Konstantin. The blue cabinet color with the black came out really nice. The white was not really my taste but if I could recommend you show the cabinets facing directly the camera lens instead of at an angle and maybe much closer so the effect is even more pronounced. Thanks for the great video!
I always add the hardener . But we have the whole Idustrial set up with the spray booth and air mask. For home use I would recommend using 2 component products due to the safety concerns
It is stunning! Thank you Konstantin for such an amazing video! If there was a list of those products that you used or recommended in the video description or in the comment that would be awesome!
Thanks for the comment! I used Envirolak single component primer and the CIC single component polyurethane topcoat and I also used Milesi water based glaze
These finished cabinet doors look beautiful. I am curious to see what the finished cabinet base looks like; do you have a photo of the doors attached to the finished cabinet base? Question: Why did you spray the navy color and brush paint the white?
Hey Robin ☺️🙌🤝 photos of the frames no - but it looks absolutely the same. The reasons why I sprayed on the blue door is to show that there’s no difference with brushing technique using these materials
It was blue navy as far as I remember. For the primer I used envirolak t 9000. For the topcoat I used Cic satin sheen single component polyurethane water-Born . And it was was Milesi glaze.
Great video demonstrating differences, techniques and contrasts! The blue cabinet was amazing after the cerusing? Spell 😅. I needed guidance as I'm planning on painting my oak cabinets as well. I considered a tan wash vs tan paint, any suggestions? Thanks again for this very informative video! New subscriber here 😊.
Hello and welcome 🤓👋 are you Debbie ? Thanks for the kind words! Sorry I’m not sure what tan wash or tan paint means . We’ll be happy to give you some suggestions
@@KonstantinUdalov Yes, Deb or Debbie. That's ok, its mixing paint with water, painting on then wiping back. The paint left behind allows grain to show with some color. Same as whitewash, pickling, I think. Tan paint is just painting with a tan colored paint. That you showed with a different color. . Thanks for the reply! 😊
That is a heck of a lot of work.... I'm in deep dodo because I have 150 drawers and doors to do, plus all the cabinets themselves... what are your thoughts about sandblasting the cabinets but using soda? The sand gun is cheap, you can rent a compressor and it will get in every knock and cranny??? What are your thoughts???
Great video! Thanks! Quick question - what sheen did you use on th ebase color? I have heard that if the base sheen is flat or eggshell you would need a topcoat with a satin or better sheen before glazing. What are your thoughts? Also, what grit sandpaper did you use to remove the glaze?
I’d suggest a higher sheen for the base colour: I used 20. Top coat sheen doesn’t effect anything. Just your preference. I like 10 sheen. 20 or 5 is good too, to remove the glaze I used 220 or fine sponge
Hey, great video. Would you be so kind as to provide some additional information, please? I live in Canada and have been trying to purchase glaze for my cerusing project, but it's no longer available. Also, the only glaze I'm familiar with is difficult to work with for cerusing anyway. I'm wondering what product you used exactly? Your black spray-able material looked very good. Appreciate your response.
Hey J . absolutely! =) We have richelue in canada that has ICA waterbased glaze and any colour CNL pigments. - you get the glaze (or aging agent - they call it ) and any colourant you need ( CNL waterbased ICA) mix it together and there you go. Also depending on where exaclty in Canada you live - there's other polyurethane distributers that must have the dry glaze in stock
This is awesome. Questions: we painted our cabinets ages ago. We can see there's grain, but we aren't sure they're oak. Does it matter? Also, do we do the same process for the boxes and panels? Thanks for such a detailed video. One last Q: do you have a preferred stripping method for DIYers?
Hey there ☺️👋 if there’s nice deep grain that should work even if it’s not oak. Stripping is tricky . Very harmful stuff. For diy I wouldn’t recommend it at all. In the shop we use “aircraft stripper”
@@KonstantinUdalov we haven't started yet, just making our game plan. It's semigloss on sanded cabinets. I wish we could hire you to come to California!!
очень красиво! нереально круто! можете пожалуйста посоветовать метод и бренд краски которая лучше всего в «носке» я много готовлю и соответственно часто мою кабинеты. Спасибо! У вас золотые руки!
☺️🙌 бренд я бы полюсоветовал любой 2 component polyurethane. Почти во всех более менее крупных городах есть дистрибьютеры. Бренды . Cic centurion , Sirca, envirolak, Renner, Milesi, sivam, Ica
We have kitchen cabinets that are about 20 years old that were updated installed by previous owner. The cabinets are higher end and structures are good condition and have some sort of baked on paint, very smooth. But it is chipping off and is a hideous plum color. I have no idea how well this will work. I hate to make a mess and then just have to buy all new cabinets in the end.
Hi Graph. Ig the doors are smooth - this technique won't work. I'd suggest getting new doors and repainting the body of the cabinets - it'd be a lot less than new cabinets
Very nice! Just a question, is the ceruse look done only on doors, or is it done on side of the cabinets and trims around the door. Also, I noticed that sides and trims have less grainy look compared to doors.
It would definitely work on the frames as well. My rails have less grain either because I worked less with the wire brush or it’s just the rails had less grain in it
I did mine and it didnt turn out as i wanted obviusly different materials....now waching you doing the whole process i feel that i should do it again by follow the steps that you just explain......wish me luck and thanks for sharing tge information.....
what about maple cabinets that are smooth (from the late 90's), they are a light maple color. do you have a video on how to get them updated? And also, is this video still up to date? Or has this white and blue with the oak wood-grain showing gone away by now (11 months later), or would I still be good to get my smooth maple cabinets changed to these colors, and would that still be good in Sept. 2023? Thanks so much!!! SUBSCRIBED !!!!!!
Thank you for the comment :-) this colour trend is still there, however, on maple cabinets being very smooth, this green piping technique wouldn’t work, for smooth maple I would just go with plain colour like blue, gray or white
Products used in this video are water based and are as follows: Primer was Envirolak 1 component polyurethane primer Top coat was Centurion CIC Polyurethane 1 component. Water borne glaze was from Milesi. Clear top coat was Envirolak 1 Component Clear Poly
Would this work out with slab cabinets w/ beveled edge? Mine were painted white and hate it and this looks easier than stripping/staining them. They are the cheap wood cabinets but want to refinish until we can replace them.
Ибрагим привет. Спасибо! На водной основе - полеуретан 1 компонент. Можно впринципе любой бренд какой у вас локально доступен - главное чтобы полеуретан ☺️✅
1) What’s a replacement for a professional blower? Can I use a wet rag and dry rag? 2) what about the other side? Do you do all the coats on one then the other, or a coat on each side with dry time in between?
Might want to use a soda blaster to get into the crevices which would also clean off any grease. I've got a 40 lb. soda blaster from harbor freight which I might use for this...problem is that would have to be used outside inside of a small tent to keep the run off from killing your grass and other plants. A whole set of kitchen cabinets might be best handled by hiring the stripping out to a place that does dry ice or other media types blasting.
@@KonstantinUdalov I mean instead of paint use a stain and then try the paint or glaze for the grain filler. Bella Renovare CZcams channel has one she did on a dining table. But I was hoping you could try a stain first, then paint or liming wax.
The blue with black grains looks amazing
I agree Jackster 🤫🤙🤝
This is a really well-done video! Thanks for making it so clear AND concise.
🤝🙌😊
You just answered every question I've had for 3 years about my oak kitchen cabinet possibilities. Thank you so much for including all steps and making it simple. I want to strip varnish in motion cabinets for natural look and paint top ones lite paint. Now I know exactly how to do that!
☺️🤝🙌😊
I love this ! Turning older dated cabinets into modern I say could be trendy kitchen cabinets! Great idea.
Thanks Pamela 🤲☺️
THANK you! We are tackling our kitchen update this summer and this was super helpful!!
You are so welcome! ☺️🙌🙌
OMG, the best video I've seen! I'm starting my project soon, and you were so helpful! Thank you!
Glad it was helpful!
Fantastic video. I will be following step by step later this year, when I repaint our golden oak cabinets .
Good luck with the project Dustin! 👌☺️🤝
Thank you for the consideration to us, people who not are professionals and try to keep it on a budget.
Always happy to help ☺️🙌
Great video. Thank you for taking the time to help others learn how to do this.
Appreciate it ☺️🙌🙌🙌
Thank you so much for this video! I'm prepping myself mentally to attack my kitchen cabinets (as a novice DIYer). Found this very helpful!
Good luck Zoe ☺️🙌 reach out on Instagram if you shave any particular questions . We’ll be happy to help!
Thank you for sharing your expertise & making this video!!
Glad it was helpful!
This is probably the best option for saving old oak . Nice job dude
thanks brother ! I'm with you... no grain fill on nice oak
Definitely liked that finish with the black in the grain. I’m rewinding the video to get to that part again since I am in the process of doing this at home, so might add that step in between!
☺️🙌👏👏👏
Wow! Love it...I am going to try this. Thank you for the tutorial.
You’re most welcome, hope you enjoy the process, let me know if you have any questions, follow me on Instagram and send me questions if you have any along the process
The most helpful video for this same project. I will definitely have a try 👍
Glad it was helpful! ☺️🙌
I like the process you showed very clearly and one thing I learned is if I wanted to make something using the white and grain...i would not use the black pigment since it is a strong contrast.. but rather a medium gray pigment maybe and i think that will give the cabinets a beautiful and subtle antique look! Thanks again dude
🙌🤓
Great video!! Cheers from Calgary, Alberta
Cheers bro! 😎 I love Calgary! Go flames go !
Thank you ! Thank you so much for all your knowledge 🙏♥️ God bless you 🙏♥️
Thank you Abigail ☺️🙌🤝🙌🙌🙏
I like your technique! Very nice finish. Im getting ready to do my upper cabinets 🤞🏼
Awesome! Thank you!
beautiful job! thank you
Thank you! 😊🙏
Great video. Good info. Thanks!
☺️🙌 glad it helps
Am painting my kitchen cabinet door in April leaving lot from you
Thank you kindly regard
Paul from United Kingdom👍
This made my day Paul 😊🙌🤝 glad my videos help🙌
Looks beautiful.
Thank you 😊😊☺️
Love those!!!!
Thank you! I appreciate this video!!!
Glad it was helpful!
Great video. I've watched a ton of these in preparation for attempting this process, and the one bit of advice that stands out in this video is to have a finished control piece next to your work pieces to help ensure a consistent look.
I really like how that navy turned out. I just might do something like this in the new house we are building, so tired of all the same old white cabinets I do for everyone.
I’m sure it’ll look awesome man! ☺️👊🤝
Well done excellent job with explaining, Thanks for sharing I look forward to hear from you bye for now,
🙌☺️🤝❤️
Looks great!
Thanks!
Beautiful!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
☺️🙌❤️
Wicked! Nice work, man.
Thanks brother! ☺️🤝🤙
awesome work
Thanks a lot!
I agree that your video is different with others. You understand the DIY and not hiding the trade.
Hey Paul. I genuinely love sharing. Who cares if I know something. But when I share - people do care . ☺️👌 simple but very meaningful stuff
Nice job looking good❤
Thank you! 🤗
I love it!
🤓☺️🤝🙌
Great job thx
GREAT CONTENT😮 TYVM 💯
Amazing ❤
Thank you Monica 😊🙌🤝
That’s amazing
☺️🙌❤️
The new grain color on blue look super cool, i rather fill my oak and get a smooth finish but its nice to have options.
If you like filled look better mdf or new maple doors is a more cost effective option
Beautiful
Thanx Zak =)
I painted my mismatched oak cabinets blue; it hides both tomato sauce and coffee drip stains.
Black wrought iron hardware goes quite nicely with this.
Good stuff ☺️👊🤙
Awesome results! Yours is my favorite from all the videos I watched. Could you list the products in the description? Unfamiliar names here in Florida.
Just Google bro: distributor of CIC , Envirolak.
You’ll fine somebody local or close to you so they can ship quickly
I like to grain fill oak using aquacoat. The grain filling gives you a very smooth finish. It will never look like clear maple, but it will look very updated, and you'll only know it's a refinished oak cabinet when you are really up close because the grain does not pop out.
You always see oak cabinets that were brutally filled 😎🤓 I saw ~ 100 kitchens like that and did ~ 20 myself .
@KonstantinUdalov I don't know ow what you mean by brutally filled. Aqua Coat is very thin. You apply it and then sand it. It closes the pores of the oak and help build up between ridges. When you spray over the filled door, it looks very smooth. I did this in my old house. I could have purchased maple doors for $40 each or just put in a little work to keep the doors out of the landfill. Quite honestly, it's about the time and effort you are willing to put in.
@@AP-ph7hf wooden doors can be recycled not thrown in the garbage . time/vs money it's probably the same +/- but new shakers maple or mdf are made to be smooth. Oak is oak.
The whole point of this process was in case you want to show the oak drain. Duh! d
@smon8497 so aquaculture fills the pores so that you get paint that lays flat where there is grain. It is not a brutal fill. It is applied with a thin flexible piece of plastic. Try it some time. It will give you the professional results you aren't achieving because your preparation is lacking.
Clean with simple green and follow by dawn….thank you.
You bet!
This would make a very daunting job even more daunting. But it is definitely a different option.
Hi Giselia 😊👋 love your comment ! Honestly I would replace doors on all the oak kitchens with new mdf doors . But this technique is something that very few people are obsessed with . So I tried to help them with the tips and tricks I got on this
HI! well done.
Thank you! Cheers!🍻
Hi Konstantin , thanks for your information of how to finish old cabinets doors , they look beautiful
Can you please show us how to get rid of the wood grain on the cabinet doors to make it smooth and flat . I really do appreciate if you do so , thanks!
Hey buddy. From my experience it’s not the best to do so. - if you really need to get rid of the grain - I’d replace the doors with new smooth mdf doors and fill the grain on the cabinet boxes (just apply grain filler or wipe on white filler and sand flat )
Thanks for your video. A lot of people are now redoing their kitchens this way. It's becoming more popular. Noticed there's a few disapproving trolls. Allow people to redecorate as they wish. Be kinder.
You are right! 🙌🤝☺️
Great video Konstantin. The blue cabinet color with the black came out really nice. The white was not really my taste but if I could recommend you show the cabinets facing directly the camera lens instead of at an angle and maybe much closer so the effect is even more pronounced. Thanks for the great video!
🙌🤝😊
Спасибо, очень познавательно. В закладки, однозначно!
Спасибо Дим ☺️🙌🤝 рад стараться!
Great Job! I love the blue! With the Centurion 2K Polyurethane Topcoat 2800 Series, should I add a hardener?
I always add the hardener . But we have the whole Idustrial set up with the spray booth and air mask. For home use I would recommend using 2 component products due to the safety concerns
Beautiful! I'm wondering if I can do that with Knotty Pine?
Unfortunately it wouldn’t be the same look, the grain of the pine is different not as open and defined as of the oak
Fantastic clip brother. thanks... now can you get my wife back?
How would they be related to the glazed oak process video bro ?
The finish looks great!
🙌☺️so kind of you
It is stunning! Thank you Konstantin for such an amazing video! If there was a list of those products that you used or recommended in the video description or in the comment that would be awesome!
Thanks for the comment! I used Envirolak single component primer and the CIC single component polyurethane topcoat and I also used Milesi water based glaze
@@KonstantinUdalov Thank you very much!
These finished cabinet doors look beautiful. I am curious to see what the finished cabinet base looks like; do you have a photo of the doors attached to the finished cabinet base?
Question: Why did you spray the navy color and brush paint the white?
Hey Robin ☺️🙌🤝 photos of the frames no - but it looks absolutely the same. The reasons why I sprayed on the blue door is to show that there’s no difference with brushing technique using these materials
Beautiful job! What color blue? And what brands of paints and glaze did you use. Thank you
It was blue navy as far as I remember. For the primer I used envirolak t 9000. For the topcoat I used Cic satin sheen single component polyurethane water-Born . And it was was Milesi glaze.
Great video demonstrating differences, techniques and contrasts! The blue cabinet was amazing after the cerusing? Spell 😅.
I needed guidance as I'm planning on painting my oak cabinets as well. I considered a tan wash vs tan paint, any suggestions?
Thanks again for this very informative video! New subscriber here 😊.
Hello and welcome 🤓👋 are you Debbie ? Thanks for the kind words!
Sorry I’m not sure what tan wash or tan paint means . We’ll be happy to give you some suggestions
@@KonstantinUdalov Yes, Deb or Debbie. That's ok, its mixing paint with water, painting on then wiping back. The paint left behind allows grain to show with some color. Same as whitewash, pickling, I think. Tan paint is just painting with a tan colored paint. That you showed with a different color. .
Thanks for the reply! 😊
That is a heck of a lot of work.... I'm in deep dodo because I have 150 drawers and doors to do, plus all the cabinets themselves... what are your thoughts about sandblasting the cabinets but using soda? The sand gun is cheap, you can rent a compressor and it will get in every knock and cranny??? What are your thoughts???
I’d give it a try.
Ricks are
Wood will have a spotty uneven look (compared to flat sanding)
Grain won’t be as open as it is with wire brushing .
The blue looks gorgeuos, but the white, I prefer the first "result"
I agree 🤓 what would you use for the upper cabinets instead of white ? If we still want the glazed look ?
Great video! Thanks! Quick question - what sheen did you use on th ebase color? I have heard that if the base sheen is flat or eggshell you would need a topcoat with a satin or better sheen before glazing. What are your thoughts? Also, what grit sandpaper did you use to remove the glaze?
I’d suggest a higher sheen for the base colour: I used 20. Top coat sheen doesn’t effect anything. Just your preference. I like 10 sheen. 20 or 5 is good too, to remove the glaze I used 220 or fine sponge
Hey, great video.
Would you be so kind as to provide some additional information, please?
I live in Canada and have been trying to purchase glaze for my cerusing project, but it's no longer available. Also, the only glaze I'm familiar with is difficult to work with for cerusing anyway. I'm wondering what product you used exactly? Your black spray-able material looked very good.
Appreciate your response.
Hey J . absolutely! =) We have richelue in canada that has ICA waterbased glaze and any colour CNL pigments. - you get the glaze (or aging agent - they call it ) and any colourant you need ( CNL waterbased ICA) mix it together and there you go. Also depending on where exaclty in Canada you live - there's other polyurethane distributers that must have the dry glaze in stock
Bravo! Mind sharing the name of the blue paint color (and brand) you used? I'd love to do this to our 1985 golden oak cabinets. Thanks
🙌☺️🤝 this particular one was Navy blue from Ben Moore
great
This is awesome. Questions: we painted our cabinets ages ago. We can see there's grain, but we aren't sure they're oak. Does it matter? Also, do we do the same process for the boxes and panels? Thanks for such a detailed video. One last Q: do you have a preferred stripping method for DIYers?
Hey there ☺️👋 if there’s nice deep grain that should work even if it’s not oak.
Stripping is tricky . Very harmful stuff. For diy I wouldn’t recommend it at all.
In the shop we use “aircraft stripper”
@@KonstantinUdalov thanks. Should we just sand the old paint off instead of stripping it?
@@cs9134 I'd say so. Is the paint hard ? or it gumms up ?
@@KonstantinUdalov we haven't started yet, just making our game plan. It's semigloss on sanded cabinets. I wish we could hire you to come to California!!
@@cs9134 if it's not soft but hard and holding up nicely - glaze and clear should go over no problem
очень красиво! нереально круто!
можете пожалуйста посоветовать метод и бренд краски которая лучше всего в «носке»
я много готовлю и соответственно часто мою кабинеты. Спасибо!
У вас золотые руки!
☺️🙌 бренд я бы полюсоветовал любой 2 component polyurethane. Почти во всех более менее крупных городах есть дистрибьютеры. Бренды .
Cic centurion , Sirca, envirolak, Renner, Milesi, sivam, Ica
Great examples! Refinishing oak cabinets is a major pain in the ass. What is that oven looking thing behind you?
Hey mate ☺️🤝🙌 it’s an automated sanding machines. We like spraying but not sanding. I have a video about it
Hello! Thanks for the video. I am wondering what you are using to get the black glaze off. Is it sandpaper? Or a kind of sponge?
You’re welcome ☺️🙌 it’s a medium grit sanding sponge. Pretty soft
Just beautiful ❤️! I don't think my free cabnets are oak can I still do this on them?
I think so. But the one grain definitely helps
Donde hay artesanos que hacen esa maravilla😢
We have kitchen cabinets that are about 20 years old that were updated installed by previous owner. The cabinets are higher end and structures are good condition and have some sort of baked on paint, very smooth. But it is chipping off and is a hideous plum color.
I have no idea how well this will work. I hate to make a mess and then just have to buy all new cabinets in the end.
Hi Graph. Ig the doors are smooth - this technique won't work. I'd suggest getting new doors and repainting the body of the cabinets - it'd be a lot less than new cabinets
Good Job Bro
Thanks man ☺️🤝
@Konstantin Udalov where can i buy that black glaze I live in Saskatoon is there a way to order
Very nice! Just a question, is the ceruse look done only on doors, or is it done on side of the cabinets and trims around the door. Also, I noticed that sides and trims have less grainy look compared to doors.
Sides would have less grain because is not real wood
It’s real wood all around 😄 I just might’ve made a bit less wire brush work
It would definitely work on the frames as well.
My rails have less grain either because I worked less with the wire brush or it’s just the rails had less grain in it
Thanks!
I did mine and it didnt turn out as i wanted obviusly different materials....now waching you doing the whole process i feel that i should do it again by follow the steps that you just explain......wish me luck and thanks for sharing tge information.....
Best of luck my friend! 🙌🤝 make sure you sand very well and also very important to use the wire brush - it will clean up and open up the grain
I may have missed this in the tutorial. Any specific things to keep in mind on the type of paint to use after using the primer?
1 component polyurethane is the best.
Any brand you can find in your area. My best are: sivam, Sirca, envirolak, cic, Ica, Milesi, il a, Renner.
what about maple cabinets that are smooth (from the late 90's), they are a light maple color. do you have a video on how to get them updated? And also, is this video still up to date? Or has this white and blue with the oak wood-grain showing gone away by now (11 months later), or would I still be good to get my smooth maple cabinets changed to these colors, and would that still be good in Sept. 2023? Thanks so much!!! SUBSCRIBED !!!!!!
Thank you for the comment :-) this colour trend is still there, however, on maple cabinets being very smooth, this green piping technique wouldn’t work, for smooth maple I would just go with plain colour like blue, gray or white
@@KonstantinUdalov ok, thanks so much!!
Great, border lands cabinets
Hmmm nice.
😊🙌
Hi could u list down the primer paint and product option and brand?
Sorry I couldn’t follow clearly catch the brand u mentioned.
Cic , envirolak, there also circa , Milesi, renner, ica , sivam, and many other Italian polyurethanes
Products used in this video are water based and are as follows:
Primer was Envirolak 1 component polyurethane primer
Top coat was Centurion CIC Polyurethane 1 component.
Water borne glaze was from Milesi.
Clear top coat was Envirolak 1 Component Clear Poly
Thanks for the useful comment, one thing to add is all products water based 👌✅
Are you able to do the black in the same color as the cabinet and end up with a smooth finish or would you still be seeing the grain?
Hi Luke. Not sure what you mean.
Do you want to make oak doors look smooth with no grain ?
@@KonstantinUdalov correct. Make them look smooth with no grain
Great video Thanks. Please take more time to say the product names, or list them in the video subtitles. Thanks again..
Absolutely. Those were : Envirolak t9000, Cic top coat satin sheen. All 1 k polyurethanes .
N blue is the nicest color.
Absolutely agree with you ☺️👌
Konstantin, would it be the same process if the oak cabinets had a dark dark stain on them?
Yep I’d say so
Would this work out with slab cabinets w/ beveled edge? Mine were painted white and hate it and this looks easier than stripping/staining them. They are the cheap wood cabinets but want to refinish until we can replace them.
If they are made out of oak - than this technique is possible. If not - I’d recommend to replace it .
Здравствуйте Константин,отличный ролик, можете дать названия материалов которые используете и состав на водной или масленной основе ?
Ибрагим привет. Спасибо!
На водной основе - полеуретан 1 компонент. Можно впринципе любой бренд какой у вас локально доступен - главное чтобы полеуретан ☺️✅
one more quesstion, is the blue top coat is infact a paint coat or is this the protective clear top coat?
The blue paint is step 2 (after primer) step 3 is glaze and step 4 clear coat to lock the glaze down
Thank you @@KonstantinUdalov
1) What’s a replacement for a professional blower? Can I use a wet rag and dry rag?
2) what about the other side? Do you do all the coats on one then the other, or a coat on each side with dry time in between?
1) vacuum is the best
2) I do backs first fully finished , mask them off and then do the fronts
Might want to use a soda blaster to get into the crevices which would also clean off any grease. I've got a 40 lb. soda blaster from harbor freight which I might use for this...problem is that would have to be used outside inside of a small tent to keep the run off from killing your grass and other plants. A whole set of kitchen cabinets might be best handled by hiring the stripping out to a place that does dry ice or other media types blasting.
sounds like a lot of fun =)
Would like mine painted with the industrial stuff
For the top coat, can we just just any paint?
Clear coat ☺️👌
Are we supposed to let the Gel dry and sand it or just put it on let it sit for a few minutes then wipe it off
Hey brother . Depending on the type of glaze you use. What type / brand do you use ?
Can I do this paint skill (change color ) on the cabinet door which has a thin wood layer glued on the surface ?
Maybe- depends on many factors
Can I do this same thing with my Alder wood cabinets?
I think so if the grain in somewhat deep
So there's no need to strip the old lacquer before beginning the cerusing process?
Not really . All that’s needed is good bite - and we achieve that with aggressive sanding
Beautiful .. I’m trying to paint a memorial cabinet for my son they got murdered & just like your but I want three colors white black & grey
Very very sorry about your loss 🫣🥹🥹🥹…. I can’t even think about painting anymore after your comment ….
Could you try a cerused finish on stained wood? Thanks.
That was actually a stained oak door. Do you mean smooth stained doors ?
@@KonstantinUdalov I mean instead of paint use a stain and then try the paint or glaze for the grain filler. Bella Renovare CZcams channel has one she did on a dining table. But I was hoping you could try a stain first, then paint or liming wax.
What would you do to the interior of the cabinets and doors?
Interior I’d leave as it is. Frames if you have them I’d do same way sf the doors
So you'd do both sides of the door, or just the exterior of the door?@@KonstantinUdalov
Wonder if it will work with milk paint as the base paint.
Absolutely. There’s no limits in colour combinations 🤙☺️