Maas Rowe Carillons Is the company and they turned 100 years old this year. My father worked there his entire working career, met my mom there, and I got my first job there as well, tuning chime tubes... Thanks for the cool videos, you earned another sub!
I love working on old tube amplifiers. Can't beat the make it simple stupid design. One thing I would note when replacing power cords is watch polarity. Modern power cords and outlets are polarized. As you are aware some radios and TV's ran a hot chassis. Back in the day you had a 50-50 chance when plugging in something that you could be attaching the chassis to neutral or hot. When replacing the cord always be sure the neutral side of the cord is attached to the neutral side of the cord. Just thought I would mention that for the viewers.
Good point ! I lived in this dumpy apartment years ago and had friends over all the time. One day I went to wash my hands and grab a beer from the fridge well aparently touching the metal fridge door handle and the sink faucet were neutral/hot. One friend found out the hard way getting a beer even after the warning.
It will be an immense honour to be given a tour round your Broadcast transmitters. Another informative, and very well crafted video: thank you Paul. Phil.
I started out working on tube TVs when I was a Kid. My Mom had found some how to books from the 50's and I used them to help me repair TVs. The problem with that is every time I turned around somebody wanted to give their old broken TV. I quickly ran out of room for them, but I did get pretty good at cannibalizing parts to repair other TVs. Thanks for the great video!
Thank you for this video. You brought back a memory/question from my youth (54 now) that I never answered. I remember thinking our church bell sounded the same EVERY Sunday but never knew why. Now it makes sense. Carillon amplifier. Now I know.
Just found your channel, subscribed. I love tube equipment. In 1973, aged 13, I built a preamp and power amp from the schematics in the 1963 RCA Receiving Tube Manual. Remarkably, it worked “out of the box.” Still have it! I learned that much of the spacious component placement came from following the recommended tube spacing distances in the power amp. Commercial amps often crowded the tubes to save cost. I also learned about touching 250V B+ circuits when I slipped one day. Never again. The output transformer cost $60 back then at the local supply house. It weighs as much as a small anvil. Wish I had a box full of them.
When I was in high school a friend of my parents who was a ham radio operator gave me a RCA receiving tube manual and an ARRL ham radio handbook. Over time I read them from cover to cover. Plenty of these old books are still around and well worth having for everyone who is interested in vacuum tube circuitry. Also many have been scanned and can be downloaded for free.
i love all your videos, i listen to em when im teching, as a self taught tech, Ive come to find Im most impressed by gear that has lasted the longest in service without needing repair even over performance and "specs" , which really comes down to craftsmanship and engineering over cost-cutting or the latest trends.
Doing repair and restauration work on vintage tube gear since more than four decades I endorse everything said and demonstrated in this excellent educational video! IMHO only one minor aspect was not mentioned and this is the deterioration of carbon (composite) resistors over time. The higher the value, especially above appr. 100kOhm, and the higher the voltage drop over these resistors, the more likely their value has increased above the usual 10% tolerance range. Deviations of more than 100% are no rarity. Recently I was called to a Hammond E-100 (mfd. around 1965) with a weak vibrato channel. The plate resistor of an EF86/6CF8 had changed its value from nominal 220kOhm to 1.4MOhm! So I usually check all resistors if I have older gear on the bench for restauration. Only inductors seem to be quite stable over decades, but capacitors and resistors are definitely prone to leakage and value changes with time. Keep on making your splendid teaching videos, Paul. You have universal knowlegde and experience and great teaching abilities! Even for an old hand like me It is great pleasure to watch your stuff (e.g. the Yaesu FT-1000 rep&mod) and to learn about some details. Best regards Alex
To all who follow Mr Carlson's videos this man really knows his electronics, both vacuum tube and solid state! I recently acquired a very clean Maas Power Amplifier so I especially enjoyed the history on this amplifier. I was also surprised to find so few components in the Maas but sometimes simple on an audio amplifier means less to get in the way of the amplified signals.
I am a newbie for building tube amplifier. It is extremely hard to find good tutorials/ references in the Asian world even i am in Hong Kong. Thank you for your kind and superior explanation Mr. Carlson, and I clicked "confirm to join" on Patreon of course. Let's get started!
Great, informative video Mr.C. I have a vacuum tube amp. that I built as a Knight Kit KG 240. In 9th grade I had finished my assigned wood shop projects, so the teacher allowed me to design my own with 2 months left. All mom had to play her records on was a dirt-cheap Wards plastic portable. Dad got Allied catalogs and in the sale insert they offered an amp kit, 2- 8" speakers and a record changer for I think $59.99. I first showed it to mom, and she then to dad. The battle was on. Money wasn't a factor, but his lack of faith in me was well versed. He caved to my surprise and we sent off for it. Mr. Symington entered it in the Spokane Amateur Woodworkers fair and I won 5th place. I was never so careful assembling anything as that amp because I knew I'd never hear the end of it if I made a mistake. I finished it while they were out shopping, and when they came in the house I had the amp, speakers and changer laid out on my bed blasting away with one of mom's favorite records. She was all smiles but the old man...... When it was all together she enjoyed it for many years. Now I have severe non-military PTSD so it's very difficult to follow your tips. But I'd like to see the 240 glow and make music again after 53 years. Thanks and take care, Keith L.
Great story. You did a really nice thing and have a great memory for it. Dads were quite stoic back then... You're the adult now. It's up to you. God Bless!
Very insightful video! Tube technology is actually very interesting. I still have much to learn, but watching your videos gives me that opportunity. Thanks once again, Paul, for another great and well explained video!
Thank you Paul, I have watched numerous vids you have done on tube radios and amplifiers and tube test equipment and how to bring them back to ;their former glory or better. It has helped me as I have recently brought back to life an approx. 1936-38 Silvertone / Mission Bell 41AW radio that I bought at a Saturday night farmers auction in 1967.
"I have a couple of broadcast transmitters..." Now there is a phrase you don't hear on many youtube channels. Thanks Paul, yours is my favorite channel.
Thanks for the interesting video I just admired and I must say it was a real surprise to see such a wonderful amplifier that can work for hours uninterrupted way doing its job. Looking forward of seeing you again ,thanks for the time you have given us.
Tiny Grief capacitors... I love it! Reminds me of Windows when Microsoft came out with it's new "Plug and Play" technology and we'd call it, "Plug and Pray" instead :P
Microsoft used to work together with Ericsson so when Ericsson announced their Bluetooth technology Microsoft were fast to counter it with their Blue-Screen technology.
I was in New York's Time Square about 10 years ago and one of the huge video screen had a massive BSOD Blue Screen Of Death. Wonderful adverting for Microsoft. :-)
Thank you for the good info!! Have been working on restoring some vintage ham radio equipment that belonged to my dad. There is some home-built audio stuff he had, too, that I plan to do at some point. VERY useful information for someone like me who grew up working on solid state stuff. THANKS!
Ho vissuto di pane e valvole tutta la mia gioventù e ora che sono vecchio le adoro sempre e ne ho una bella collezione. Ho costruito molti amplificatori con le mitiche 6V6. Ho tutti i bollettini della geloso dai quali ho attinto parecchi schemi in quanto internet non esisteva. Complimenti per il tuo canale che mi fa sognare.
You are a breath of much needed air - the commitment to want to do it well and do it right - something that's sadly becoming a rarity in today's disposable society.. My wife would never let me have that much test gear buy hey I can dream :) Thanks again, I like watching something that is the total opposite of "10 quick fixes". videos.
Another very cool on vintage gear. Nice work. And, yes, it would be great to see inside a transmitter that you can literally stand in!!!! Thanks for the GREAT vids.
You sent me on a learning path I never expected...what’s a carillon? So I looked it up. A carillon is a percussion musical instrument consisting of at least 23 cast bronze bells, any less than that and it’s a chime. Some are played mechanically but traditional ones are played manually via a large keyboard and footboard by a carillonneur. The largest one in the world is in the Palace of Mafra in Portugal and has 120 bells. Most carillons are installed in bell towers but there are portable ones. Your MAAS 50 may have amplified pre-recorded bell music, but it may also have amplified live emulated bell music played on a keyboard. The bell sound signal was created by striking various length tuned metal rods or tubular bells via solenoid driven hammers and picked up with a mic or magnetic pickup. Often the church organ keyboard could be set to play the carillon. The German name for a carillon is a glockenspiel.
Aloha- I cut my teeth with the vacuum tubes as transistors were too noisy and would never be able to handle any power or high speed transit switching. So much for the wisdom of the day! I enjoy your channel as I enjoyed the component level repair of the electronics I was working on. I always said I would retire when we quit component level repair, and I did, but I also never thought I would see the day I could sneeze and blow away all my spare parts. Modern is ok as my ham radio gear is more stable and more accurate than some of the test equipment we used. Thank you [Mahalo] for your time and work reviewing the older technology. Aloha No.
Another great video! I decided to see if I could find one of these. I did, but nothing like the ones in the video. Model 40 (if I recall) and it was basically being held together by rust and electrical tape!
Definitely exactly the video I was looking for as well as the tube troubleshooting tips vid. I've got a 1957 VM phonograph/changer that is non-functioning as well as a 69 Hammond H-182 organ with low output volume. I've done the obligatory electrolytic/paper cap replacement in both, but the phonograph is still silent. None of the tubes are lit but I can hear a very faint hum from the speakers. The chassis is buried in the body which makes it quite difficult to get to its underside while keeping it connected to the speakers. After watching your troubleshooting tips, I'm definitely going to be checking the heater voltages as a first test to see if i'm in need of a new transformer. On the organ, going through the service manual, the speaker RMS voltages are supposed to read about 10.5 Vrms, however mine seem to be at about 2 Vrms at maximum volume. After watching the same video, I'm assuming it could be the bias resistors off of the cathode or the plate resistor which could be causing a small differential in the voltages. Again, all electrolytic and paper caps have been replaced, but it only helped so much. I swear I learned more about tube amp theory and diagnosing in your two videos than I have in years of fiddling with them.
Hi I really injoy your teaching methods your very clear and explain how everything works alone and together visually the art of the inside off the amplifier is beautiful to me thank you for spending your time and showing us your craft an information...
God I love your channel. I am (hopefully) picking up my first tube amp tomorrow. When I got the good news my first thought was to see what you had to say on the subject. Thanks for all the awesome content.
"some form of a tech"... I LOVE it! There are so many "some form of a tech" that I have seen here on youtube and out in the world with NO idea of what they are doing! Love that comment!
YES!!! I want to see broadcash transmitters! Excellent video. Very basic yet very informative. Also, have you noticed that the metal can crapacitors tend to last WAY longer than other types? I've NEVER had to change one. Even in 60 year old equipment. The exception being the salt and pepper shaker style copper can style in my Philco model 70. There was loose stuff inside that came out the holes on top. I just disconnected it, polished it up and put some small electrolytic craps underneath. A coat of clear coat and the copper still looks new 25+ years after restoration! 73's de w1rmd.
When I was a teenager I was given a tube stereo (15W/channel) and thought I would “improve” it by changing a lot of the the point-to-point wiring to PC board which meant designing the PC board. I bought the etching kit from Radio Shack and completed that phase of the project but never finished. The amp died from unknown causes and I shelved everything. I now understand there is a reason why the tubes and components are laid out the way they are on a tube amp, and I would have created a lot of problems had I “succeeded” by completing the project. One feature of this amp that I remember was that it used a full bridge rectifier with four power diodes, rather than a tube rectifier.
How can anyone give a thumbs down to any Mr Carlson's Lab video? Yet another great video, Mr Carlson. I'm addicted to your videos. I don't watch them in any kind of order. I'm looking at a Newcomb D-10 and thinking about converting it into a guitar/bass/harmonica amp. Any tips you can give me?
Great vid, very informative! YES please to some videos on big AM and FM transmitters that use tubes as finals. Please make them as in-depth as possible including info on how to set them up, fault-finding and general operating tips. Thanks!
Always great videos Mr Carlson. I have a few items that use tubes. I have 2 Fender guitar amps. Both I bought new. One of those amps is a Fender Deluxe Reverb II it's about 36 years old now and sounds better than my Fender Twin Reverb amp. I won't have nothing but a Fender amp and none of this solid state stuff lol 😁 I've kept up with a lot more powerful solid state amps with that old Deluxe that only puts out a whole 20 watts RMS. And I would really like to see inside a transmitter so count me in lol have a safe and blessed day Sir 😊
I have an Lafayette tube amp (SE, Class A) from 1967 It hasn't had any maintenance and was sitting there collecting dust for +10 years , till I bought it from at a garage sale. The only thing I did, was replace all the caps, new tubes, new potentiometer and added a bleeder resistor in the supply & cleaned the unit up a few hours later...It worked like a charm! As if it was brand spanking new They don't make stuff like that anymore sadly, build to last.
I just aquired a Maas model 50 and a 500 in pristine condition. A quick look, I was able to see a rough picture in my mind of the 50's circuitry. I'm amazed that there isn't a schematic on the internet, as popular as these were. It looks like I'll have to pencil one out. It appears that the 50 will require a preamp, too. I may remove the two triodes and wire in two 6sn7's. Part of me wants to politely convert this old girl into a sweet guitar amp. The 6v6 screen regulator in a novel idea; something that a few 1k resistors could easily do, opening up another tube socket. Now for the best part... the serial number on mine is 80!?! The audio chain caps in mine are ceramic, and not the axials that you have in yours.
Paul this was interesting Video, in that it reminded me of when I had bought from P&T Surplus in Kingston N.Y. USA a Bell Tower Carilon tape system WITH the power amp much like you have there! The tape was contained in quite LARGE tape cartridges about three times the size of the old cartridges used in broadcast studios!! the player could hold 12 cartridges that held the hourly bell chimes, then there was another player unit that held 3 cartridges I think these were for any public announcements by the church OR civil authorities. I had rebuilt the system had it for a while then sold it to another church that had built a new facility about 10 miles down the road from me!
As bulky, heavy and primitive as they are, I doubt will ever get over my love for old tube amps like those. I too stumbled on a guy who was selling his whole garage full of electronic stuff, mostly from WW2-50's, and in that pile were 32 NOS JAN Sylvania 6L6GA tubes. Sweet. In cartons, though the cardboard would literally crumble if you touched it. So, I built a tube matcher to see if I could gather sort-of matched pairs. Apply the same conditions to two tubes and with two identical panel meters read the cathode currents. I was amazed; very few pairs could be matched closer than 2-3 mils and the readings ranged from 23 to 45 ma. They were all over the place. They all worked but it's as if they were different tube types.
Hi really interested in the stuff there’s a lot to learn and it’s good to have somebody giving you some tips you can even save your life who is working on stuff like this Just goes to show sometimes you can’t be too careful
Dear Carlson, Thank you for your video and knowledge sharing. About a year ago I purchased a Luxman MQ-88uC and really like the sound but I have experienced one problem that is distressing me...suddenly there's no sound from the left channel. In one year of intense use it has now happened four times. I am using a single source connected directly to the Variable input and after turning the volume down and up a few times the sound eventually comes and no more issues for a few months. Since it works well most of the time and I can't replicate the problem it feels awkward to send it to repair service. On the other hand it is very disappointing that such an expensive amplifier has this kind of issues. I changed the driving tubes (both ECC83 and ECC82) to NOS mullard after experiencing the problem the first three times, I had hopes this could solve the problem but it happened again. I have checked the bias current and all seems fine, reading near 480mV in all tubes. Should I worry about thins? Any suggestions would be much appreciated. Best regards.
I just subscribed to your channel! That was a very interesting subject you just covered, and the way you explain everything makes it very easy to understand. I do like the older tube equipment, especially those with the point-to-point wiring. Everything is laid out in a logical manner and is much less complicated that those with circuit boards. Plus, the older tube stuff, if maintained properly (or sometimes not maintained at all!) will last for years! 70+ years for tube gear as opposed to how few number of years for a transistorized equivalent? No contest! If that same amplifier had transistors in it and water (or bird "squirt" got in there), bye-bye transistor! I also liked your cap tester with the eye tube in it. Reminds me of those "tuning eye" receivers which were popular back in the day. My grandmother had one, I think it was a Zenith, an early FM receiver with a center-channel tuning eye. It was one of those models which was manufactured very soon after the FM broadcast band was moved to where it is now. I will just stick to the phrase, "If it doesn't glow, it ain't real!" Thanks and 73! de NØJAA.
Maas Rowe Carillons Is the company and they turned 100 years old this year. My father worked there his entire working career, met my mom there, and I got my first job there as well, tuning chime tubes... Thanks for the cool videos, you earned another sub!
As a former broadcast engineer this was a walk back in history for me. Very well done and appreciated.
I love working on old tube amplifiers. Can't beat the make it simple stupid design. One thing I would note when replacing power cords is watch polarity. Modern power cords and outlets are polarized. As you are aware some radios and TV's ran a hot chassis. Back in the day you had a 50-50 chance when plugging in something that you could be attaching the chassis to neutral or hot. When replacing the cord always be sure the neutral side of the cord is attached to the neutral side of the cord. Just thought I would mention that for the viewers.
Good point ! I lived in this dumpy apartment years ago and had friends over all the time. One day I went to wash my hands and grab a beer from the fridge well aparently touching the metal fridge door handle and the sink faucet were neutral/hot. One friend found out the hard way getting a beer even after the warning.
I destroyed a TV back in the sixties .. because of polarity reversal.
It will be an immense honour to be given a tour round your Broadcast transmitters.
Another informative, and very well crafted video: thank you Paul.
Phil.
Thanks for your input Phil!
I agree. I was a broadcast engineer back in the early '60s.
I started out working on tube TVs when I was a Kid. My Mom had found some how to books from the 50's and I used them to help me repair TVs. The problem with that is every time I turned around somebody wanted to give their old broken TV. I quickly ran out of room for them, but I did get pretty good at cannibalizing parts to repair other TVs. Thanks for the great video!
Thank you for this video. You brought back a memory/question from my youth (54 now) that I never answered. I remember thinking our church bell sounded the same EVERY Sunday but never knew why. Now it makes sense. Carillon amplifier. Now I know.
Just found your channel, subscribed. I love tube equipment. In 1973, aged 13, I built a preamp and power amp from the schematics in the 1963 RCA Receiving Tube Manual. Remarkably, it worked “out of the box.” Still have it! I learned that much of the spacious component placement came from following the recommended tube spacing distances in the power amp. Commercial amps often crowded the tubes to save cost. I also learned about touching 250V B+ circuits when I slipped one day. Never again.
The output transformer cost $60 back then at the local supply house. It weighs as much as a small anvil. Wish I had a box full of them.
When I was in high school a friend of my parents who was a ham radio operator gave me a RCA receiving tube manual and an ARRL ham radio handbook. Over time I read them from cover to cover. Plenty of these old books are still around and well worth having for everyone who is interested in vacuum tube circuitry. Also many have been scanned and can be downloaded for free.
i love all your videos, i listen to em when im teching, as a self taught tech, Ive come to find Im most impressed by gear that has lasted the longest in service without needing repair even over performance and "specs" , which really comes down to craftsmanship and engineering over cost-cutting or the latest trends.
My knowledge about electronics is absolutely nothing! But watching this channel I learn a lot! Awesome channel!
Doing repair and restauration work on vintage tube gear since more than four decades I endorse everything said and demonstrated in this excellent educational video!
IMHO only one minor aspect was not mentioned and this is the deterioration of carbon (composite) resistors over time. The higher the value, especially above appr. 100kOhm, and the higher the voltage drop over these resistors, the more likely their value has increased above the usual 10% tolerance range. Deviations of more than 100% are no rarity. Recently I was called to a Hammond E-100 (mfd. around 1965) with a weak vibrato channel. The plate resistor of an EF86/6CF8 had changed its value from nominal 220kOhm to 1.4MOhm!
So I usually check all resistors if I have older gear on the bench for restauration. Only inductors seem to be quite stable over decades, but capacitors and resistors are definitely prone to leakage and value changes with time.
Keep on making your splendid teaching videos, Paul. You have universal knowlegde and experience and great teaching abilities! Even for an old hand like me It is great pleasure to watch your stuff (e.g. the Yaesu FT-1000 rep&mod) and to learn about some details.
Best regards
Alex
To all who follow Mr Carlson's videos this man really knows his electronics, both vacuum tube and solid state! I recently acquired a very clean Maas Power Amplifier
so I especially enjoyed the history on this amplifier. I was also surprised to find so few components in the Maas but sometimes simple on an audio amplifier
means less to get in the way of the amplified signals.
I am a newbie for building tube amplifier. It is extremely hard to find good tutorials/ references in the Asian world even i am in Hong Kong. Thank you for your kind and superior explanation Mr. Carlson, and I clicked "confirm to join" on Patreon of course. Let's get started!
Great, informative video Mr.C. I have a vacuum tube amp. that I built as a Knight Kit KG 240. In 9th grade I had finished my assigned wood shop projects, so the teacher allowed me to design my own with 2 months left. All mom had to play her records on was a dirt-cheap Wards plastic portable. Dad got Allied catalogs and in the sale insert they offered an amp kit, 2- 8" speakers and a record changer for I think $59.99. I first showed it to mom, and she then to dad. The battle was on. Money wasn't a factor, but his lack of faith in me was well versed. He caved to my surprise and we sent off for it. Mr. Symington entered it in the Spokane Amateur Woodworkers fair and I won 5th place. I was never so careful assembling anything as that amp because I knew I'd never hear the end of it if I made a mistake. I finished it while they were out shopping, and when they came in the house I had the amp, speakers and changer laid out on my bed blasting away with one of mom's favorite records. She was all smiles but the old man...... When it was all together she enjoyed it for many years. Now I have severe non-military PTSD so it's very difficult to follow your tips. But I'd like to see the 240 glow and make music again after 53 years. Thanks and take care, Keith L.
Great story. You did a really nice thing and have a great memory for it.
Dads were quite stoic back then... You're the adult now. It's up to you. God Bless!
Very insightful video! Tube technology is actually very interesting. I still have much to learn, but watching your videos gives me that opportunity. Thanks once again, Paul, for another great and well explained video!
Thank you Paul, I have watched numerous vids you have done on tube radios and amplifiers and tube test equipment and how to bring them back to ;their former glory or better. It has helped me as I have recently brought back to life an approx. 1936-38 Silvertone / Mission Bell 41AW radio that I bought at a Saturday night farmers auction in 1967.
Your welcome Ron!
"I have a couple of broadcast transmitters..." Now there is a phrase you don't hear on many youtube channels.
Thanks Paul, yours is my favorite channel.
Thanks Ian! I'm glad you're enjoying the channel!
Another big YES to the question about your transmitter tour idea! Well done video as always. Thank you.
Thanks for the interesting video I just admired and I must say it was a real surprise to see such a wonderful amplifier that can work for hours uninterrupted way doing its job. Looking forward of seeing you again ,thanks for the time you have given us.
sir, when comes to vintage electronic stuff you are the master your narration touches the history as well .. thats amazing
Thanks for your kind comment!
Tiny Grief capacitors... I love it! Reminds me of Windows when Microsoft came out with it's new "Plug and Play" technology and we'd call it, "Plug and Pray" instead :P
LOL!
Microsoft used to work together with Ericsson so when Ericsson announced their Bluetooth technology Microsoft were fast to counter it with their Blue-Screen technology.
I was in New York's Time Square about 10 years ago and one of the huge video screen had a massive BSOD Blue Screen Of Death. Wonderful adverting for Microsoft. :-)
hehe, yeah I remember that. ISDN was "troublesome" 😅
ISDN - "I Scramble Data Nausiatingly". :)
Thanks am having a great time seeing the older videos. Very enjoyable and always something to learn.
I just stumbled onto this video. Fascinating, and beautifully done. Mr. Carlson, you are a gifted teacher. I'll become a patron. Thank you.
Thanks! I look forward to seeing you there.
um espetáculo de equipamento que coisa linda
Thank you for the good info!! Have been working on restoring some vintage ham radio equipment that belonged to my dad. There is some home-built audio stuff he had, too, that I plan to do at some point. VERY useful information for someone like me who grew up working on solid state stuff. THANKS!
Ho vissuto di pane e valvole tutta la mia gioventù e ora che sono vecchio le adoro sempre e ne ho una bella collezione. Ho costruito molti amplificatori con le mitiche 6V6. Ho tutti i bollettini della geloso dai quali ho attinto parecchi schemi in quanto internet non esisteva. Complimenti per il tuo canale che mi fa sognare.
You are a breath of much needed air - the commitment to want to do it well and do it right - something that's sadly becoming a rarity in today's disposable society.. My wife would never let me have that much test gear buy hey I can dream :) Thanks again, I like watching something that is the total opposite of "10 quick fixes". videos.
Thank you for always posting these videos they are always interesting to watch.
Another very cool on vintage gear. Nice work. And, yes, it would be great to see inside a transmitter that you can literally stand in!!!! Thanks for the GREAT vids.
I enjoy watching your videos because they're relaxing and you learn something when it comes to electronic repair and care of electronic devices
You sent me on a learning path I never expected...what’s a carillon? So I looked it up. A carillon is a percussion musical instrument consisting of at least 23 cast bronze bells, any less than that and it’s a chime. Some are played mechanically but traditional ones are played manually via a large keyboard and footboard by a carillonneur. The largest one in the world is in the Palace of Mafra in Portugal and has 120 bells. Most carillons are installed in bell towers but there are portable ones.
Your MAAS 50 may have amplified pre-recorded bell music, but it may also have amplified live emulated bell music played on a keyboard. The bell sound signal was created by striking various length tuned metal rods or tubular bells via solenoid driven hammers and picked up with a mic or magnetic pickup. Often the church organ keyboard could be set to play the carillon.
The German name for a carillon is a glockenspiel.
Aloha- I cut my teeth with the vacuum tubes as transistors were too noisy and would never be able to handle any power or high speed transit switching. So much for the wisdom of the day! I enjoy your channel as I enjoyed the component level repair of the electronics I was working on. I always said I would retire when we quit component level repair, and I did, but I also never thought I would see the day I could sneeze and blow away all my spare parts. Modern is ok as my ham radio gear is more stable and more accurate than some of the test equipment we used. Thank you [Mahalo] for your time and work reviewing the older technology. Aloha No.
Glad you're enjoying the video's Charles! Thanks for taking the time to write.
Always great to learn something new. Thank You
This channel is a true gem...
finally I was able to manage to watch a great video Paul. Never heard before about Bell amplifiers...Thanks for sharing. Take care
Another great video! I decided to see if I could find one of these. I did, but nothing like the ones in the video.
Model 40 (if I recall) and it was basically being held together by rust and electrical tape!
Fantastic video! I cannot say enough! You might have explained the reason for more than one rectifier tube. Honest, these are great! Thankz
Definitely exactly the video I was looking for as well as the tube troubleshooting tips vid. I've got a 1957 VM phonograph/changer that is non-functioning as well as a 69 Hammond H-182 organ with low output volume. I've done the obligatory electrolytic/paper cap replacement in both, but the phonograph is still silent. None of the tubes are lit but I can hear a very faint hum from the speakers. The chassis is buried in the body which makes it quite difficult to get to its underside while keeping it connected to the speakers. After watching your troubleshooting tips, I'm definitely going to be checking the heater voltages as a first test to see if i'm in need of a new transformer.
On the organ, going through the service manual, the speaker RMS voltages are supposed to read about 10.5 Vrms, however mine seem to be at about 2 Vrms at maximum volume. After watching the same video, I'm assuming it could be the bias resistors off of the cathode or the plate resistor which could be causing a small differential in the voltages. Again, all electrolytic and paper caps have been replaced, but it only helped so much.
I swear I learned more about tube amp theory and diagnosing in your two videos than I have in years of fiddling with them.
Hi I really injoy your teaching methods your very clear and explain how everything works alone and together visually the art of the inside off the amplifier is beautiful to me thank you for spending your time and showing us your craft an information...
God I love your channel. I am (hopefully) picking up my first tube amp tomorrow. When I got the good news my first thought was to see what you had to say on the subject. Thanks for all the awesome content.
Great video, loved the leakage demo with the magic eye. Great example of how useful these old testers still are. Subscribed!
Thanks Tom!
Thanks a lot sir ! Please put more of these videos !
dude,you are a great instructor, thanks for sharing.
Nice, and very thorough as usual.
Thank you
"some form of a tech"... I LOVE it! There are so many "some form of a tech" that I have seen here on youtube and out in the world with NO idea of what they are doing! Love that comment!
That is a beautiful layout!
very good mr calson thank you
Thanks for this. Very interesting as always.
YES!!! I want to see broadcash transmitters! Excellent video. Very basic yet very informative. Also, have you noticed that the metal can crapacitors tend to last WAY longer than other types? I've NEVER had to change one. Even in 60 year old equipment. The exception being the salt and pepper shaker style copper can style in my Philco model 70. There was loose stuff inside that came out the holes on top. I just disconnected it, polished it up and put some small electrolytic craps underneath. A coat of clear coat and the copper still looks new 25+ years after restoration! 73's de w1rmd.
Love your vid. Keen to see a tour!
Keep it up!
Excellent overview and repair process. Im enjoying this very much! - Thumbs up!
When I was a teenager I was given a tube stereo (15W/channel) and thought I would “improve” it by changing a lot of the the point-to-point wiring to PC board which meant designing the PC board. I bought the etching kit from Radio Shack and completed that phase of the project but never finished. The amp died from unknown causes and I shelved everything. I now understand there is a reason why the tubes and components are laid out the way they are on a tube amp, and I would have created a lot of problems had I “succeeded” by completing the project. One feature of this amp that I remember was that it used a full bridge rectifier with four power diodes, rather than a tube rectifier.
One of my favorite channel to watch, thanks a lot really, i love all your videos Mr. Carlson
Thanks!
How can anyone give a thumbs down to any Mr Carlson's Lab video?
Yet another great video, Mr Carlson. I'm addicted to your videos.
I don't watch them in any kind of order.
I'm looking at a Newcomb D-10 and thinking about converting it into a guitar/bass/harmonica amp.
Any tips you can give me?
Beautiful piece !! Thats art !
a nice idea showing your transmitters too!
definitely interested in the radio transmitter tour!
Great vid, very informative! YES please to some videos on big AM and FM transmitters that use tubes as finals. Please make them as in-depth as possible including info on how to set them up, fault-finding and general operating tips. Thanks!
Very interesting video Paul (yet again), and yes I would like to see inside a broadcast transmitter.
Another great video Paul 😁👍
Firstly another great video
I for one would love a tour of a broadcast transmitter
Excellent info. Paul
We'll take the big transmitter tour too. 73, Scott W0KU.
Great video - many thanks!
Great video, thanks. Love to see a diagram of the amp. Yes it is simple but always more to learn. Dave
Thanks for another great video.
Love those 6L6Gs they look great!
this video is just fantastic, thanks so much!!
Great video once again! Thank you for teaching>>
For point to point that is super clean
Yes I'd be fascinated to see the inside of a broadcast transmitter. Thank you very much.
Great video. Thanks.
Yes to the vintage transmitter tour, please. Thanks for this video.
Always great videos Mr Carlson. I have a few items that use tubes. I have 2 Fender guitar amps. Both I bought new. One of those amps is a Fender Deluxe Reverb II it's about 36 years old now and sounds better than my Fender Twin Reverb amp. I won't have nothing but a Fender amp and none of this solid state stuff lol 😁 I've kept up with a lot more powerful solid state amps with that old Deluxe that only puts out a whole 20 watts RMS. And I would really like to see inside a transmitter so count me in lol have a safe and blessed day Sir 😊
As always Paul another great bit of education thank you.
Regards G
You're welcome Graeme!
Yeah cheers excellent diagnostic
Very interesting...thank you.
Your vids are spectacular and I love that you use Heath products in your lab.
Thanks Bob!
Thanks for the vid Mr. C. . Now I want to get me one , or two of these amps , just to see what they sound like .
Great video.
I have an Lafayette tube amp (SE, Class A) from 1967
It hasn't had any maintenance and was sitting there collecting dust for +10 years , till I bought it from at a garage sale.
The only thing I did, was replace all the caps, new tubes, new potentiometer and added a bleeder resistor in the supply & cleaned the unit up a few hours later...It worked like a charm! As if it was brand spanking new
They don't make stuff like that anymore sadly, build to last.
wow love this amp so beautiful
very cool - articulate and interesting ----- thanks
GREAT VIDEO FROM NASA.
Very good video Paul!! I would love to see the inside of an old broadcast transmiter!! Take care, Hugo
It could be very interesting to look at capacitor tester you've mentioned - schematics and possible failures.
Thank you for interesting videos!
"Pigeon crap," ha! Another cool vid Mr. C.
That was great, thank you. I wonder how many are still sitting forgotten in a dark dusty corner.
Thank you for this video!
Now you have to show us how we build our own leakage meter ...
I just aquired a Maas model 50 and a 500 in pristine condition. A quick look, I was able to see a rough picture in my mind of the 50's circuitry. I'm amazed that there isn't a schematic on the internet, as popular as these were. It looks like I'll have to pencil one out. It appears that the 50 will require a preamp, too. I may remove the two triodes and wire in two 6sn7's. Part of me wants to politely convert this old girl into a sweet guitar amp. The 6v6 screen regulator in a novel idea; something that a few 1k resistors could easily do, opening up another tube socket. Now for the best part... the serial number on mine is 80!?! The audio chain caps in mine are ceramic, and not the axials that you have in yours.
I have a complete re-design of this amp on Patreon with schematics, and a lot of other information.
Old tech here, love old gear and other stuff ,, enjoy all , 2 thumbs up
Thanks 👍
Paul this was interesting Video, in that it reminded me of when I had bought from P&T Surplus in Kingston N.Y. USA a Bell Tower Carilon tape system WITH the power amp much like you have there! The tape was contained in quite LARGE tape cartridges about three times the size of the old cartridges used in broadcast studios!! the player could hold 12 cartridges that held the hourly bell chimes, then there was another player unit that held 3 cartridges I think these were for any public announcements by the church OR civil authorities. I had rebuilt the system had it for a while then sold it to another church that had built a new facility about 10 miles down the road from me!
Great story John, Thanks for sharing that!
As bulky, heavy and primitive as they are, I doubt will ever get over my love for old tube amps like those.
I too stumbled on a guy who was selling his whole garage full of electronic stuff, mostly from WW2-50's, and in that pile were 32 NOS JAN Sylvania 6L6GA tubes. Sweet. In cartons, though the cardboard would literally crumble if you touched it. So, I built a tube matcher to see if I could gather sort-of matched pairs. Apply the same conditions to two tubes and with two identical panel meters read the cathode currents. I was amazed; very few pairs could be matched closer than 2-3 mils and the readings ranged from 23 to 45 ma. They were all over the place. They all worked but it's as if they were different tube types.
Yes to looking inside a transmitter.
Hi really interested in the stuff there’s a lot to learn and it’s good to have somebody giving you some tips you can even save your life who is working on stuff like this Just goes to show sometimes you can’t be too careful
Keep up the great work :)
Mr Carlson, again thank you for a very informative video.
You're Welcome Royce!
Thanks for the vid and info!! Very helpful.
You're Welcome!
Dear Carlson,
Thank you for your video and knowledge sharing. About a year ago I purchased a Luxman MQ-88uC and really like the sound but I have experienced one problem that is distressing me...suddenly there's no sound from the left channel.
In one year of intense use it has now happened four times. I am using a single source connected directly to the Variable input and after turning the volume down and up a few times the sound eventually comes and no more issues for a few months.
Since it works well most of the time and I can't replicate the problem it feels awkward to send it to repair service. On the other hand it is very disappointing that such an expensive amplifier has this kind of issues. I changed the driving tubes (both ECC83 and ECC82) to NOS mullard after experiencing the problem the first three times, I had hopes this could solve the problem but it happened again. I have checked the bias current and all seems fine, reading near 480mV in all tubes.
Should I worry about thins? Any suggestions would be much appreciated.
Best regards.
I love all your videos you are the greatest thanks for all your videos .
You're welcome Arthur!
I just subscribed to your channel! That was a very interesting subject you just covered, and the way you explain everything makes it very easy to understand.
I do like the older tube equipment, especially those with the point-to-point wiring. Everything is laid out in a logical manner and is much less complicated that those with circuit boards. Plus, the older tube stuff, if maintained properly (or sometimes not maintained at all!) will last for years! 70+ years for tube gear as opposed to how few number of years for a transistorized equivalent? No contest! If that same amplifier had transistors in it and water (or bird "squirt" got in there), bye-bye transistor!
I also liked your cap tester with the eye tube in it. Reminds me of those "tuning eye" receivers which were popular back in the day. My grandmother had one, I think it was a Zenith, an early FM receiver with a center-channel tuning eye. It was one of those models which was manufactured very soon after the FM broadcast band was moved to where it is now.
I will just stick to the phrase, "If it doesn't glow, it ain't real!"
Thanks and 73! de NØJAA.
Welcome!