How to Replace Starter 1996-2002 Toyota 4Runner
Vložit
- čas přidán 7. 09. 2024
- Buy Now!
New Starter from 1AAuto.com 1aau.to/ia/1AES...
This video shows you how to install a new starter on your 1996-2002 Toyota 4Runner. The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start.
This process should be similar on the following vehicles:
1996 Toyota 4Runner
1997 Toyota 4Runner
1998 Toyota 4Runner
1999 Toyota 4Runner
2000 Toyota 4Runner
2001 Toyota 4Runner
2002 Toyota 4Runner
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obhu/1A...
• Pry Bar 1aau.to/oR8/1AX...
• 12mm Socket 1aau.to/obqq/1A...
• 13mm Socket 1aau.to/obqq/1A...
• 14mm Socket 1aau.to/obqq/1A...
• Trim Tool Set 1aau.to/o8X/1AX...
• Ratchet 1aau.to/obxH/1A...
• Socket Extensions 1aau.to/obqq/1A...
• Swivel
• Torque Wrench 1aau.to/oaBs/1A...
• Gloves 1aau.to/oY6/1AX...
• Safety Glasses 1aau.to/oSf/1AX...
• Silicone Paste
• Floor Jack 1aau.to/o2W/1AX...
• Jack Stands 1aau.to/oRR/1AX...
• Pole Jack
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
4:11 Hey dude, love your videos nice and concise. One thing I would add though is to start off by showing the location of the parts being worked on, like is shown in this frame. Because at the beginning where you showed disconnecting the wire from the starter a lot of us don't know exactly where you're working at.
You do not have to lower the sway bar! You can remove two bolts holding the brake line move it aside. the Automatic transmission dipstick comes apart right behind the frame rail. The top of it unbolts from the block. Starter slides out from the fender well.
just done this today wasn't too fun but doable mine is a manual transmission... manual there is a bracket shaped like a triangle attached to the transmission two 14mm on the transmission 1 14mm attached to the exhaust if you have a manual transmission you don't have to take the sway bar off you can sneak by the rack and pinion lines but gently moving it aside the fun part is putting the new one up and holding it up to line the bolts in the hole without crossthreading , thanks for the video it helped me out
+jon lambert Thanks for watching our video! 1aau.to/m/Shop-TRQ
That truck has so much more clearance then my 2000 t4r. Can’t get this starter out for the life of me
Fantastic video - thank you. I bought my '01 4Runner new and now have 540,000 miles on it. The starter has never been messed with in any way. But I know it can't go on too much longer. :)
Clear and easy to follow. 2000 2 wheel drive was a easy swap. Thanks!
Guys another heads up if you are messing with any rusted area with the bolts or screws are at please use WD-40 lubricant spray OR PB Blaster lubricant spray
+Yomommahouse Thanks for the feedback! 1aau.to/m/Shop-TRQ
Nice job! Thanks for sharing. What led you to change out your starter? I have a slow crank, no start situation, so wondering if this is my issue (bought a new battery a few months ago).
Nicely explained can’t go wrong. Thanks
Starter comes right out, wiggle it straight down, never needed to remove anything, when getting to the two bolts on the Starter, just remove exhaust bracket for clearance, from the time the car went in the air, and back down. 90 minutes, with floor jack. When doing anything electrical on your car always remove batterie terminal,. Difficulty level 3 out of 10. Save money do it yourself
My bolts are seized on the bottom part of the starter, any suggestions for getting both of them out? Help or insight from anyone is appreciated
Great video! It helped alot. Thank you
Did you jack your truck up at all or just lay underneath?
Thanks
So I have a 3rd gen 4runner limited and I watched this video and it was simple enough for me to handle it. I followed step by step and for some reason my starter doesn't even click and it keeps blowing my starter relay. Any idea? the only thing I've noticed is when I plug the single wire into the starter it doesn't click into place no matter how much force I apply.
That car has more rust than the Titanic.😂
Hey you have some rust under there
my toxic trait is thinking I can do this by myself..