How to make a Wall Mounted Drill Press #2 | Bosch PBD 40
Vložit
- čas přidán 23. 03. 2019
- This is part 2 of the Wall Mounted Drill Press Project.
PART 1 : • How to make a Wall Mou...
For a long time i wanted to have a drill press, which has the perfect height for me. And i didn't want that this drill press take up much floor space. So i came up with the idea, to hang a drill press to the wall. I also built a special feature and a drill table with drawers underneath. This drill press is so convenient and ergonomic to work with, especially with my body height of almost 2 meters.
ISBI
-------------------------------------------------------------------------------
#ISimplyBuiltIt #woodwork #workshop
------------------------------------------------------------------------------- - Jak na to + styl
This is part 2 of the Wall Mounted Drill Press Project.
PART 1 : czcams.com/video/g5ZADSfxros/video.html
Die Runde Opferplatte ist wie der Rest super! Freue mich auf Teil 3
Vielen Dank.
Super gemacht! schaut echt cool aus! Super Funktional und gut!Ich freue mich auf den nächsten Teil! LG Julian
Very nice!
The circular drill plate is a very good idea.
Thank you!
Very nice idea 10/10 , I might do the same when I change my current drill press . the right up on the Bosch is good 👍
Excellent job. Admire Your skills. Keep up !
Toll gemacht 👍👍vielen Dank für´s zeigen, und viele Grüße vom Hansi
Danke.
Well done!
Thank you.
That extended depth for drilling is referred to the "throat", like on your neck. Looks like it gives you an extra 100mm of depth. Great feature!
I like your videos a lot! Your voice reminds me of Arnold Schwarzenegger (as a compliment).
Thanks.
was muss ich da noch mehr sagen. Cool wie immer!! Gruss Dany
Danke Dir!
Felicidades!!!
Saludos Cordiales.
Fernando Gutiérrez Sánchez.
Eine gute Idee prima umgesetzt
Vielen Dank.
For someone who talks funny (That is a non-politically correct joke!) you sure do awesome work and excellent explanations. I still want the plans to your Sand Block Project. Keep up the awesome work!
Thanks. Maybe you read my article. I'm already working on plans.
cool table i have the same drill. At the moment it stands on the table, but it's quite possible that I will use your way, but I will probably make the base from aluminum
Great video and very good idea. I'm really considering to build one for my own Bosch drillress. Have you considered mounting the metal column upside down so that the drill is lower to the table which would allow you to use normal drills instead of the long ones?
Thank you. That's a good idea. But I needed this height in another project already. I think it was the TILTABLE DRILL TABLE.
Klasse gemacht. Pläne waren echt gut😁😊😊
Abo hast du von mir. Super Arbeit!!
Vielen Dank.
This is very awesome! I am binge watching your older videos that I have not seen yet and I really like your channel. You come up with some cool projects too :) Yes, I understood what you meant by the outreach. I am a native English speaker and I'm not sure what I would have used to describe that myself. One thing I have been noticing in your videos when you are talking about cutting "strips" of wood for like a border or slats or faceframe. You have been saying "stripes" instead of "strips" which are different words in English. You want "strips" which is like what you have been saying except the the 'i" is more like in the word "lips" instead of like "strike". "Strips" is what you're looking for, but you might use "stripes" (like you've been saying) if you were talking about a shirt that is "striped" or the flag of the United States that has stars and "stripes". It is probably a stupid difference when they are basically talking about the same thing. But just thought I would let you know :) Thank you so much again for making these videos! Off to part 3...
Very nice project ! What kind of drill is this ? I have never ever seen this kind of drill but I like it a lot ! Thank you.
Thank you. It's a Bosch PBD 40
Sehr interessantes Feature! Zu dieser Art von T-tracks habe ich persönlich bedenken das sich der Schraubenkopf eingräbt bzw. das Holz ausbricht ich würde zumindest ein Stück Flacheisen zu einem Nutenstein ausarbeiten um eine größere Klemmfläche zuhaben
Danke. Ich verstehe Deine Bedenken. Da ich aber die T-Nut nicht zum spannen von Werkstücken verwende, sondern nur um einen Anschlag und sonstiges Zubehör auf dem Tisch zu befestigen (was nicht extrem gespannt wird) mache ich mir da keine Sorgen. Bei meiner einstellbaren Frässchablone habe ich Nut-Steine selbst gemacht.
Love this build. I bought the same drillpress some time ago, figuring id wallmount it. Never gotten around to do it yet tho. Hope i will some day. Love the drillpress.
Will there ever be some plans for this?
may this will be another option for you too it's easy to build even without any plans czcams.com/video/iiFY6ZAXglQ/video.html
Thank you. Unfortunately i couldn't find the time to make plans yet. But i will make plans. But that may take a while.
@@Andy-te6jj yeah, already seen it :) good build also.
super / молодец
Thank you
Súper súper como me gustaría poder tener uno como ese equipo
gracias
Hi what is the overall diameter of the collum that the drill press is on ?