"RATROD" BICYCLE REVAMP! ADDING DIMPLE DIES, PINSTRIPING, AND MORE! // PUDDIN'S FAB SHOP

In this video we drag the old show cruising rat bike out of the cellar and freshen her up for this summer! Be sure to subscribe, comment, share and give me a follow on Instagram @puddinsfabshop.
#bicycle #hotrod #puddinsfabshop

[@kimberlywilliams9757]

Imagine that! Puddin ' pressure washing fully clothed! 😂

[@PaintySniffers]

Hi Puddin, I'd love to see you doing some more with the pinstriping and maybe some more bicycle builds.
I know a lot of folk can't afford to modify cars n trucks at the moment and custom cycle builds are affordable, simple and fun.
Anyway, I love the content and I'm here every monday night for your latest upload.
Keep having fun sir 👍

[@craftyukraine]

Hi! Please, check out my latest video about Schwinn with Hot Rod custom Grills!😉

[@iMiik]

"Leave me some feedback good or bad I don't care" 😆😆😆lol

[@PuddinsFabShop]

😂👊🏻👊🏻

[@iMiik]

@@PuddinsFabShop 😂👊🏼

[@iMiik]

@@PuddinsFabShop hey i was thinking, do you still have the templates for those dimple die pieces, I'm putting a Schwinn together and sure would like to buy a pair.

[@PuddinsFabShop]

I do not.

[@iMiik]

@@PuddinsFabShop 10-4

[@RoseBud-fk4qg]

Neat a coffin in the ground ha ha ha👍front fork makes great crows add a head and a shovel as a tail hat glasses paint black great for yard art .

[@christovar145]

This motivated me to go dig out my old bicycle from my shed. Ended up finding a whole litter of dead kittens. Looks like the door got shut on them & they couldn’t get out (the door usually doesn’t latch well so it flaps open).
Idk what kind of omen that is but it definitely set me back on tinkering with my bike 😂

[@LOVEMCHUNCKY]

Hell yeahhhhhh....so glad i found this old video of yours....dope 🏆👍🇺🇸

[@Mister006]

Right on! Tornado Alley isn't a movie, it's the real deal! I'm glad you have a storm cellar! I'm impressed by your pinstriping ability! The pinstriping on your shop garbage can was super-cool!

[@peerplaut]

your travelall, your truck, your bike. They're all blue LOL

[@PuddinsFabShop]

I did the bike waaayyyy before I had either of those. I do see a pattern lol.

[@gregnixon1296]

Love the handlebars.

[@kevinnkadeslowrideraddicti216]

Me n my 8yr ol boy build bicycles too...This is Hella Sick..I'd Rock it...Great share Brotha

[@craftyukraine]

Hi! Please, check out my latest video about Schwinn with Hot Rod custom Grills!😉

[@ratoneJR]

Came out nice. Prefect for car show transportation.

[@PuddinsFabShop]

It’s sold now!

[@TheBigJuicy]

Going to work on my Broncco mini bike car show crawler when I get back. CANT WAIT!

[@nathanielkhoom6043]

Love it! Absolutely love it!!!! Thing of beauty again Puddin'
I'm planning on building something low and slow over summer from two old, scrap frames....if I'm not sitting on my arse!

[@josecorzo8084]

Love the bike came out sweet rock on pudding

[@PuddinsFabShop]

👊🏻👊🏻👊🏻

[@pmay222]

well i like it.... funky.. .. unique.. well done

[@PuddinsFabShop]

Thanks!!

[@jeremyTallen1]

Got that funky 🎶 😊

[@douglaseconomy7238]

Diggin the bike great job!

[@PuddinsFabShop]

Thanks!

[@tacovids]

Amazing undergroundd artist, hope you keep growing

[@PuddinsFabShop]

Thanks for the comment! I do too!

[@87jstep]

That turned out nice.

[@JohnSandate]

Mexican blanket upholstery. 🔥🇲🇽🇺🇸

[@PuddinsFabShop]

👊🏻

[@blaketomlinson681]

awesome bike bro, love the pinstriping

[@PuddinsFabShop]

Thanks!

[@dontheplumber9338]

Sweet bke!

[@PuddinsFabShop]

👍🏻👍🏻

[@supergameforever143]

Let me show you my most true beautiful huffy bike. You will not expect to see it for the first time. Its only one handmade as custom programs upgrade cost me is $1500 from began at $150. She's a DemonRod lol.

[@big_blok_hed]

that thing is sick man, awesome job

[@PuddinsFabShop]

Thanks!

[@edwinmendez3836]

Awesomeness job🔥🔥🔥

[@PuddinsFabShop]

Thanks! 🔥🔥

[@glenhynes3593]

Keep up with the pin striping you did good

[@victorgoins6131]

Very cool rat bike!

[@caphilli2]

Cool bike!

[@javopadilla5155]

Te quedó chingona bro

[@PuddinsFabShop]

Thanks! 🔥🙏🏻👊🏻

[@JESUSRAMIREZ-rd7br]

Its. Awesome!!👍👍👍

[@PuddinsFabShop]

Thanks 👊🏻👊🏻

[@vincentlawrence5603]

Got the Kevin gates playing in the background lmao love it

[@ATOMSHAMRADIO]

Really cool

[@PuddinsFabShop]

👊🏻👊🏻

[@HenriquePR]

way you did and painting was show,congratulations

[@PuddinsFabShop]

Thankk you.

[@pedieasuncion4277]

That ride turned out pretty nice if you ask me

[@PuddinsFabShop]

Thank you.

[@jdswiss360]

For a “simple build” that bike is pretty badass 🤙🤙🤙

[@PuddinsFabShop]

👊🏻👊🏻thanks!

[@leroybryant8107]

What size frame is it and what's the tire size

[@Hagar_le_Horrible]

You've come a long way

[@otismurederface]

Sick bike man

[@PuddinsFabShop]

Thanks man

[@steveyackel4637]

Forking awesome

[@DroooooopDead]

Looks cool

[@craftyukraine]

Hi! Please, check out my latest video about Schwinn with Hot Rod custom Grills!😉

[@jackassman6726]

Kool ... I Dig it ...!!!!!

[@PuddinsFabShop]

Thanks jack

[@lwrdinu]

Dig the bike brother!!!

[@PuddinsFabShop]

Thanks man! Maybe it will sale this summer at a show lol

[@kwikslvr73]

good job...

[@PuddinsFabShop]

Thank you sir!

[@Johnleefromthemist]

nice project bro show these new grasshoppers how to wrench

[@nicholewarner9131]

Jim with the cameo!

[@PuddinsFabShop]

Where’s me coffee cup, damn it!

[@michaellemons5143]

That's cool

[@user-427.commodore]

Biken with PUDDIN

[@Hagar_le_Horrible]

Hot Damn Puddin

[@j.d.kilgore6333]

Man! I just saw this bike get sold on Facebook marketplace! This inspired me to build my own. Good job man #okieneighbor

[@PuddinsFabShop]

I still have it for sale on there!

[@dest151]

@@PuddinsFabShop did you sell and how much did it go for? ( really nice bike)

[@lonniepitcock3440]

I’m inspired to build a cruiser. CZcams has a few how to video, but I wanna use a tall 29” reg front wheel and a 5 speed 24” 4 or 5 inch wide rear tire. I want a low seat chopper style. I’m gonna have to send you templates for my “gas tank” speed hole like you did. *NICE!*

[@stuckinthepast5537]

You should build another one 😎

[@PuddinsFabShop]

I don’t disagree!

[@clasicks6670]

Hey this is probably a dumb question but Oh well. Tryn to take my rear wheel off and it's just impossible. Any advice to removing it without further damage?

[@Bigskyguy56]

Cool.....
Stay Real.

[@PuddinsFabShop]

👊🏻👍🏻👍🏻

[@TheBlueBikeDoyle]

😎 cool 👍

[@craftyukraine]

Hi! Please, check out my latest video about Schwinn with Hot Rod custom Grills!😉

[@gordonwalker8003]

👀👍 cool bike 26" and ofcouse it light blue too. ive also a schwinn 20" 5 speed . you could see on youtude 2011 from Back To The BRICKS cruise Flint mich . at the drive- in .where everyone come through the ticit gate . im on the right side on drivers coming in .from Gordon E Walker .

[@user-KrackerJack]

😎 cool

[@alicemoon9008]

No Comment’s - Great 👍🏼 Job !!!!!
Hi 👋 from Russia 🇷🇺 …..
P.s. President: Chertanovo Chopper’s Custom Club ……
(Moscow City) 🌆 …..

[@Recycledhooligan]

Like your bike helmet

[@jameslopez5371]

I like it

[@PuddinsFabShop]

Thanks man

[@Romanm1957]

Love the bike, but what is that cellar used for? Sorry I'm in Las Vegas and we don't see those here!

[@PuddinsFabShop]

I live in “tornado alley”. That’s where we go when a tornado is headed our way. Also good for storing canned foods, water, pickled veggies and other country stuff when not full of water 😂

[@nigelbarratt9807]

🤩

[@crbrepairmotorcycles6608]

Is baby blue your favorite color ,few years later you have a baby blue chevy luv, just clicked on this to watch snowing here today nothing to do

[@PuddinsFabShop]

Not really actually! Lol

[@Richofallthings]

I am am in! I need to find a cruiser bike

[@johnnypayne9357]

@ 10:02 RIP. lol

[@pisto_run_cycling]

Looks sick.. did you rake the front fork yourself?

[@PuddinsFabShop]

Yes I did. Ive seen people bend them. I put a series of pie cuts in the fork and curved it where I wanted and then welded up and smoothed out.

[@arifmahida8666]

👍

[@arthurquinn7515]

I would love to have that

[@ItsAdam12]

Nice bike I've been wanting to build one myself

[@PuddinsFabShop]

I don’t cruise it very often. More then not it’s in my way lol.

[@ItsAdam12]

Ever think about selling it ?

[@PuddinsFabShop]

I have.

[@ItsAdam12]

I’d be interested..

[@PuddinsFabShop]

Where are you located?

[@SchysCraftCo.]

Slick

[@tommcl8548]

👍👊

[@HFG]

Lucky! You ever take it off any sweet jumps? :)

[@PuddinsFabShop]

Sold it!

[@craftyukraine]

Hi! Please, check out my latest video about Schwinn with Hot Rod custom Grills!😉

[@tomkrause62]

Trans fluid and acetone?

[@PuddinsFabShop]

I’ve used that, trans fluid and kerosene and trans fluid and lighter fluid.

[@stevec85]

How tall were those handlebars?

[@PuddinsFabShop]

I honestly don’t remember.

[@guitardedjohnny2389]

Dig the helmet!

[@PuddinsFabShop]

Thanks buddy!

[@johnfunches2916]

Man you are pretty good at- pin stripping

[@PuddinsFabShop]

Thanks. Just do it for fun here or there

[@PhengHawj1993]

What's the name of the fork?

[@PuddinsFabShop]

It’s whatever come factory on the bike.

[@kucingkelabuid2110]

How many cm high is that handlebar?

[@PuddinsFabShop]

I don’t remember exactly

[@kucingkelabuid2110]

@@PuddinsFabShop Ok guys.

[@winfieldblackburn7024]

Is dimple dies gonna be your trademark?

[@bryandhispup]

You still have this old bike around in 2024?

[@armandomascorro9527]

Could u make me some panels with the dimples like that

[@PuddinsFabShop]

I currently don’t have free time for extra stuff.

[@jamesweaver7755]

👍👋👋👋😁

[@PuddinsFabShop]

👊🏻

[@Tuurs]

euhhhhh ya well ok

[@anthonyadams6715]

Sup brother I love the project . I am working on one my self if you don’t mind helping me out . How did you pie cut fork ?

[@PuddinsFabShop]

I think I did a cut every 3/4 of an inch or so and I didn’t cut all the way through. Leave the back material. 4 on each side in the same locations. Then I held the forks with the vice and pull the top to bend it. Straighten as much as possible and weld it up/smooth it out.

[@anthonyadams6715]

Puddin's Fab Shop thanks bro keep up the vids love them

[@anthonyadams6715]

Puddin's Fab Shop What type of weld did you use MiG ?

[@PuddinsFabShop]

Yes sir.

[@anthonyadams6715]

Puddin's Fab Shop just done my forks used my flux core 😔 that all I had . Made my cuts at 4 , 6 , and 8inches . Looks sick I also took 1 full inch out the neck . It Was actually easier than I thought. Thanks for the confidence bro

[@mentaldogmark]

So in a hurricane drowning is your biggest problem

[@joelmason8464]

I put and it would look just awesome if you L S it lol 🤣

[@craftyukraine]

Hi! Awesome styling!😎👍🏻
Please, check out my latest video about Schwinn with Hot Rod custom Grills!😉 Thank you for sharing! Your bike looks awesome!😊💙💛

[@latejanaranja2106]

Amigo esta buenísima esa bicicleta,muy buen trabajo y gracias por compartirla. Te dejo un link de las mías. Abrazo grande .
czcams.com/video/Eomnt25BRlk/video.html

[@PuddinsFabShop]

Thanks for watching!

[@RoseBud-fk4qg]

Not a good idea riding a bike and drinking don't mix well 🤕🤕🤕🤕🤕

[@t4rbrah899]

The welds are cringe and the patterns 🤢

[@PuddinsFabShop]

🤣 did you atleast like the unicorn helmet.

[@heyhocodyo01]

Rat rod just means your too lazy to fix it properly do it right or don't do it at all only idiots do rat rods

[@PuddinsFabShop]

There’s a few definitions of the word to me

[@craftyukraine]

Hi! Please, check out my latest video about Schwinn with Hot Rod custom Grills!😉