I’d rather have different flash patterns lighting The whole bar on each switch position, then have a separate button for front and rear cutoff (multi-stage button)
In ours, the siren tones sound in 0,1,2,3. After a routine transport, my clipboard slipped and accidentally sounded the siren *at a hospital!!!* Our "takedown" lamps were in the center. Had to splice wires to move them out one space, (aseen in the video). Replaced them with two steadily-lit blue lamps.
LED lightbar internaheater? We transport blood platelets emergently long distances, yesterday 107 miles, on Interstate highways to mountaihospitals. Is there a way to have heat inside the lightbar to melt snow accumulating on the light bar? Thank you.
Chris, what was the wecan programming pattern to achieve the pattern you had on slide position 3, I have a duo amber/white liberty II and every time I try to program the duo function, the white and amber blend together and make a pale amber color. Thanks for your help!
In Whelen Command are you using the "Bar Flash Patterns" that are DUO Bar? Some alternate the colors and some start to blend them. When we setup our patterns (sorry we can't say what this exact one was, we did this a while ago) we'll adjust the Phasing. Check out the Phase 1 and 2 and what the modules are set to what. Switching them around might help out. You're also welcome to email us your program file. Chris can check it out.
So i just bought a liberty and a cencom gold to outfit on my pickup truck. Im in construction and do roadside work. I went with amber corners and blue middles with alleys and takedown lights. However... how do i wire this son of a gun?!! Its got me scratching my head and the whelen wiring diagram is not making any sense. Any help please?
Feel free to give us a call at (888) 959-0911. Whelen's also available for helping out with technical inquires; they can be reached by calling (800) 294-3536.
It's a speaker stand. Here's a link to them from Guitar Center :) www.guitarcenter.com/On-Stage/Compact-Speaker-Stand-Pack-1394464453897.gc?cntry=us&source=4WWRWXGP&gclid=EAIaIQobChMI1YGe58DB4QIVbx-tBh0tcwZpEAQYBiABEgLqf_D_BwE
1. Rear Ambers
2. Rear Ambers, Steady Forward Facing
3. Rear Ambers, Steady Forward Facing, Flash modules.
Love that low power mode. Would come in handy once on scene.
For all us veteran users, the switch sequence is wrong. Pos#1 should be rear only, Pos # 2 rear and front ends, Pos# 3 full light up and siren
I’d rather have different flash patterns lighting The whole bar on each switch position, then have a separate button for front and rear cutoff (multi-stage button)
In ours, the siren tones sound in 0,1,2,3. After a routine transport, my clipboard slipped and accidentally sounded the siren *at a hospital!!!* Our "takedown" lamps were in the center. Had to splice wires to move them out one space, (aseen in the video). Replaced them with two steadily-lit blue lamps.
LED lightbar internaheater? We transport blood platelets emergently long distances, yesterday 107 miles, on Interstate highways to mountaihospitals.
Is there a way to have heat inside the lightbar to melt snow accumulating on the light bar? Thank you.
Will federal signal build a navigator bar with 5 slr rotator pods and mirrors so as to make kind of an old school rotator bar.
Not presently. They max out at 3 SLR Rotators and that's in the 60" length.
Chris, what was the wecan programming pattern to achieve the pattern you had on slide position 3, I have a duo amber/white liberty II and every time I try to program the duo function, the white and amber blend together and make a pale amber color. Thanks for your help!
In Whelen Command are you using the "Bar Flash Patterns" that are DUO Bar? Some alternate the colors and some start to blend them. When we setup our patterns (sorry we can't say what this exact one was, we did this a while ago) we'll adjust the Phasing. Check out the Phase 1 and 2 and what the modules are set to what. Switching them around might help out. You're also welcome to email us your program file. Chris can check it out.
So i just bought a liberty and a cencom gold to outfit on my pickup truck. Im in construction and do roadside work. I went with amber corners and blue middles with alleys and takedown lights. However... how do i wire this son of a gun?!! Its got me scratching my head and the whelen wiring diagram is not making any sense. Any help please?
Feel free to give us a call at (888) 959-0911. Whelen's also available for helping out with technical inquires; they can be reached by calling (800) 294-3536.
It was hard to see the bar idk if it was cause of the studio lighting or if it was cause the bar was sitting higher then the camera
We positioned the camera low to avoid blowing out the focus.
@@SIRENNET oh okay
What kind of stand is the bar sitting on? I wish to have something like it to sit a bar up above and behind my tv.
It's a speaker stand. Here's a link to them from Guitar Center :) www.guitarcenter.com/On-Stage/Compact-Speaker-Stand-Pack-1394464453897.gc?cntry=us&source=4WWRWXGP&gclid=EAIaIQobChMI1YGe58DB4QIVbx-tBh0tcwZpEAQYBiABEgLqf_D_BwE
The lightbar mount itself (base insert with pole slide-on) in something unique we get in from a special source.
5:29 looked like a CHP pattern
Good eyes :)
SIRENNET Thanks for replying!
@@SIRENNET can you make interactive light bar online
Will the cen com sapphire work with a liberty 1 bar light?
It will. You'll connect the bars trigger wires via the standard inputs.
Great video, but what is with the Yoda speak?
Just having fun :)
Ain't used to English spoken good, X ?
Ok, how do you power up those lights on the workbench?
We use an AC to DC inverter with 12 volt plug-in's. There really handy :)
I have a nice power supply that can power multiple pieces of equipment. Used for trade shows and bench testing
Where can I buy these?
Did anyone else notice the lower power button come on and off by itself around 2:18?
I did notice that myself. 😳
Ghostly :)
Correct you are.