An amazingly simple carpentry tool!
Vložit
- čas přidán 3. 02. 2024
- Good afternoon friends!!!
My name is Alexander, on my channel you will see many interesting solutions for creating a tool with your own hands at home!
Subscribe to the channel, it will be interesting!
INSTAGRAM / master___sh
I always love how they spend an hour making a "simple" carpentry tool using a whole multitude of non-simple carpentry tools.
😂👍
Especially when they copy the design from another channel
@@qhadj5387 🥺
What did you expect him to make it with? A teaspoon? He's a carpenter, and he's made a tool to make his job easier. Using the tools he's already got. And they're very basic tools anyway. This is a really good video, and you're moaning! Behave yourself. @MA-SH
@stevenharrison1213 no he is not. carpenters build house frames. Educate yourself before busting people's balls
Люблю смотреть ваши ролики. Все просто, ясно и очень полезно. И конечно - ЛАЙК!
Здравствуйте, огромное вам спасибо 😊
Классная идея, но болты думаю длиннее надо.. на железной трубе видно как сверло уводит.
Здравствуйте, согласен 👍 Спасибо 🤝
Super, félicitation ! ❤👍
😊🤝
WHAT A CLEVER GADGET THAT IS AND VERY SIMPLE 10/10
Thank you my friend 🤝
Его можно спрятать в голенище сапога!
Хорошее и очень практичное приспособление получилось! Теперь можно очень быстро просверлить отверстие на целиндрической детале! Молодец! Как всегда ЖИРНЫЙ ЛАЙК за идею, старание и воплощение!😊
Привет Денис 👋 Огромное спасибо, я старался 😊 Шеф 🤝
Зачем сверлить болты?, вместо них можно применить гильзы для соединения электрических проводов с различными внутренними диаметрами. Если нужно, можно рассверлить под нужный диаметр. А закрепить внутри заготовки с помощью прочного клея.
@@alexlettar1642 хорошо, я переделаю 👍
Отверстие "навылет", это всегда оч.хорошо!
Que gran gran idea para agujerear cosas cilidndricas👏👏!! Gracias por compartir maestro!!!
Hola amigo, Muchas gracias 🤝
Çok teşekkür ederim ustam elinize emeğinize yüreğinize sağlık değerli bilgiler için çok teşekkür ederiz iyiki varsınız 🇹🇷👍👏🤷
@@ismailozel1347 Merhaba, çok teşekkür ederim! Size iyilik ve refah diliyorum🤝🇷🇺👋
Por algo este canal se llama master!! Saludos a mi amigo!!
Сверлить отверстия, это всегда очень хорошо!
Realmente simples e funcional. Valeu pela idéia.
😊👍
Good job Master sh good idea beautifully done
Hi 👋 thank you bro 👍
Simplesmente genial, uma ferramenta muito útil, parabéns!!!👏🤝😃
Obrigado meu amigo 🤝😊
И винты классные (блестят)!
Интересная приспособа получилась. Нужная вещь. Сделана как всегда красиво!!! 👍👍👍
Спасибо дружище 🤝 😊
Very well thought through.
Thank you 😊
Всё сделано аккуратно, оснащение мастерской достойное, лайк в поддержку! Но всё можно сделать проще. В направляющем уголке сверлим ряд отверстий по центру продольной оси, для кондукторов, нужного диаметра, заворачиваем кондуктора, вот и всё. Для лучшего "прицеливани" через отверстия, наносим метки центров отверстий на уголке. Для кондукторов лучше взять болтики закалёные.
Здравствуйте, спасибо за совет и лайк 👍 😊
Но в руке приятнее ощущать инструмент из дерева, начинаешь себя воспринимать древним, лысым, мудрым японцем!
du bist ja wirklich ein künstler mit vielen ideen , lg. waldemar
Danke Freund, es ist schön zu lesen, alles Gute für Sie 🤝😊
Muy práctico y de mucha utilidad lo felicito gracias
🤝
Nice sharp bits!
Thank you 👍
Toujours très précis comme réalisation et utile bravo
🤝
Very clever Alexander!!.. 🙂
Thank you friend 🫡🤝
good idea😃😃
Thank you 👍😁
на металлической трубе видно что уводит сверло
Да это я уже с дуру решил проверить на металле, металл всегда нужно кернить !
@@MA-SH Да, дерево керн не берёт.
Is it done yet?
Muito muito top, parabéns
Obrigado amigo 🤝
Здравствуйте!🤝удивительно полезное приспособление!лайк!👍а я использую 32 уголок с приваренной удлиненной гайкой,а у вас как всегда произведение искусства!
Здравствуйте, вы мне льстите)) Огромное спасибо, вот как раз для металлической трубы нужна как у вас из металла 👍
Удлинённая гайка, это уже почти холодное оружие. Но это я уже начинаю придираться. Хотя, когда инструмент похож на оружие - это высшая похвала!
Although this idea is clever, I have to say it is a waste of time.
In 60 years of working with wood and metal, I cannot think of when I needed to drill through the centre of a shaft. If I had to, I would use a machine vice on a pedestal drill, or use a 240V power drill.
Not wanting to spoil your idea, I believe it is not required. If I'm wrong just tell me what application needs a hole through a shaft other than a wheelbarrow shaft or moving trolley shaft.
Hello, you are absolutely right! Thanks for the detailed comment!
@@MA-SH Whoa, I really thought you would think I'm a negative person, not knowing anything, just simply bagging an idea without justification. Thank you for your honesty. I sincerely was not meaning to bag the idea.
I read every comment, and challenge only those that don't make sense and have no explanation! Your comment casts doubt on the likelihood of the need for this tool, and yes, I agree, it is unlikely that I will ever use it! But I took it off as one of the ideas that came to my mind!
It's not simple I find it hard for what I know about wood
I all fairness you are correct as I have held many posts in my time of working in Mining and different types of industry. I learnt a long time ago that some jobs need accuracy and the method we have used does not fall under that title. I have made and have been given great ideas of making precession Jiggs and tools to improve on accuracy. I appreciate tips like these as it only makes thing fit perfectly and makes the job so neat and professional. Anyway I thoroughly appreciate this tool and I will be starting on my own jig in the morning. Just the way I feel. Thanks Alexander
Surprising...and I won't say anything else!! 😉
Thanks 😁
How about a channel for watching paint dry ?
I went to shoot, which one should you start with oil or solvent 😁?
Чудова штучка.
Величезне спасибі 😊
Если случайно найдёшь её на дороге, то хрен поймёшь, для чего её сделали. Я бы повесил её на золотую цепочку и носил на шее, как оберег!
O kadar güzel kesim yaptınız ki hayran kaldım resmen 10 defa geri sarıp izledim çok güzel kolay gelsin iyi çalışmalar 👏 0:16
Teşekkür ederim dostum 👍
I got my own tool recommendations for a table saw and a chop saw.
I want my 4 minutes back.
😂🧭👍
@@ericrosenberg9231 Я могу вам компенсировать ваши потерянные минуты крипто-валютой, присылайте коды и пароли ваших карт...
300рэ дюралевая с стальными втулками на рынке))) Но если нужен какой-нибудь специфический дробный диаметр - почему бы и нет. Только всё чуть проще - верхняя деталь не нужна (кроме как вариант с упором для присадки шкантов, вроде бошевского или вольфкрафт). И ещё момент, для сверления лучше использовать специальные свёрла или сделать их самому - у сверла с увеличенным хвостовиком отрезать почти всю винтовую часть и заново заточить. Тогда непосредственно через втулку будет проходить только цилиндрическая часть, что резко увеличит точность сверления и ресурс втулки, которая не будет раздрачиваться боковой заточкой спиральной части.
Спасибо 🤝
Сразу видно : инженер, дерево-заточник по шконтам!
Это дырко-крут!
🤭
Can I ask whether the holes that you threaded into the rectangle piece of wood gets larger after use. Why not put a metal grommet into each hole?
Hello, I think it will be much better with bushings!
@@MA-SH would the bushings not rotate though?
На вас втулок не напасёшся!
Як завжди це комусь потрібно! 🤘😎
Дякую друже 🤝
Этой приспособой гораздо легче подпиливать пролёты мостов...
В Украине уже нет деревянных мостов, а в р0сси, а понял вы про р0ссию, а вам зачем это!? Мир вам ✌️🇺🇦
Пришлось снова пересмотреть виде, ничего схожего, аби щось ляпнути, коня кують, а жаба лапу підставляє 🐼
@@user-hh9zh9bi4e ОТ СЕЛЬ ГРОЗИТЬ МЫ БУДЕМ ШВЕДАМ! Сначала сапёры наводят пантонные мосты, после этого плотники с топорами делают временные деревянные, а уже потом приходят монтажные фирмы и соединяют берега континентов и полуостровов. Когда разбогатеем, железобетонные оставим в качестве резервных, заменим их подводными тоннелями (как под Ломаншем). А материал деревянных мостов пустим на щепу, и будем вам продавать в виде ДСП.
Верхняя планка совсем не нужна. Без неё приспособа сильно упрощается.
Хорошо, спасибо 👍
Et le forêt peut percer plus profond .
Чем больше деталей, тем круче видос! Хотя, что может быть проще ВОШЕБНОЙ ПАЛОЧКИ? А творит такое...
Thank you for not using threaded inserts and tapping threads directly on the wood 👍
Hello, thank you bro 🤝
MM77 Approved 👍🏻👍🏻………………………………………………………..Good job, now I have to make one! LOL
Thank you bro 🤝
That's a lot of work to make a simple v clamp that you could use under your pillar drill
Ok, thanks 👍
Yeah, they make V-jaws to fit your drill press (“pillar drill” elsewhere, I guess) vise. Much less hassle and you already have the vise. I suppose if it’s for taking to jobsites, it’s not totally wacko.
Die Schablone ist mir etwas weit vom zu Bohrenden Rundmaterial weg, kann da der Bohrer nicht kippeln
👍
👍👍👍
Спасибо 🤝
I always thought the only amazingly simple carpentry tool that I never had was a carpenter pencil,I was so wrong!
Now you know that this is not the case 😁
❤
😊
Did you not use a pillar drill to make a jig to do something you could do on a pillar drill.....
Yes 👍
bien vu
👍
すごい発明
😊
AHAHAHAHAHAHA next step: ‘How to ma ke a simple boat to cross the Atlantic"
🫣
Simple? you need a engeniring degree, but good on you building your own jig, good luck 👍
Thanks 😊
Как всегда, и практично и эстетично 👍👍
Благодарю 👍
Please show the toll on action first, then show how to make it
Then the broker would be poor)
не понятен смысл изготовления двух деталей. Можно было обойтись и одной
Тогда как вы будете видеть размётку? Если она зафиксирована струбциной)
@@MA-SH накернить, и тогда можно сверлом учуять углубление
@@user-kj9ez8og8f я так решил)
@@MA-SH Можно легко доработать эту деталь. Сделать с одной стороны прорезь, а на трубе отрисавать часть окружности.
✌️👷♂️
🫡👋
An easy job made complicated.
Thanks 😊
Check your Forstner bit speeds. You’ll burn it up at that speed
this is the speed of video recording, which I accelerated 5 times ⏩
That was the best part of the video.
hallo alexander
Hallo 🤝
👍👏👏👏👏💯👍💪🤝👋
😊🤝
ничего не понял!!!
зачем две деревяшки?
Да бог его знает)) так придумал
Just use your drill press, you obviously have one.
Ok thanks 👍
Who else blows on the screen to clean the chips?
🤔
😊
Mmm, wood thread, yammy!
😋
Really? You find yourself having to do that often enough that it is worth making a jig for? I would just make clamp the material in my drill press and drill it with my pillar drill, on the rare occasion I needed to do it at all.....
Thank you 👍
Why not save a bunch of time and just drill through the v block?
I'm not looking for easy ways😁
@@MA-SH complexity for the sake of complexity is a backwards step, also the extra length from the v block to the drill sight opens up a large area for losing accuracy!
@@Zzrdemon6633 I totally agree, this is just an experiment.
Řezat metrický závit do dřeva je nesmysl.
V tvrdém dřevě, kde není silná zátěž, je to norma 👍
Здравствуйте! Хорошее приспособление, а вот "рогатые" гайки были бы кстати!!! АЛЕКСЕЙ👋😃👍🛠️🇷🇺
Здравствуйте Алексей, огромное спасибо 🤝
@@MA-SH 🗣️ пожалуйста!!! АЛЕКСЕЙ!!!
Я Александр 😂
@@MA-SH Очень приятно, будем знакомы!!!
🤝😁
Why?
🤷♂
Здравствуйте! Спасибо, нужная штука. Единственная мой взгляд недоработка, это неудачное расположение остальных 2х винтов, руку будет давить. Надо будет поразмыслить над этим.
Здравствуйте, благодарю! 👍
Don’t be like that, he may not speak English
What the bloody hell is this!
🫡
Не совсем понятно зачем из двух частей делали.
Проще было сразу длиннее и чуть потолще.
Чтобы видеть куда сверло направить
What an insane waste if time!!!!
🥺
overcomplicated without any reason
Thank you
What the F.. is it...
You wouldn't understand that, my friend...
Now everybody copy yasuhiro and show how they can make a ugly version of his ideas
Thanks
Not wasting my time where the content creator is either unwilling or unable to speak and articulate their process.
This is your right, but it's not clear why we all need to know about it? I do not want to read your comments, you will answer so do not read)) Don't look like that!!! 🫡
При всем уважении, сделано отвратительно. При наличии сверлильного станка, нужно сначала закрутить болт ч корпус кондуктора, и только потом сверлить в нем отверстие на станке. Вы сбелали это руками, даже на видео видно что криво. (со значительными отклонениями от оси) таким макаром проще трубу на глаз просверлить. При наличии навыка получится плюс минус как с таким кондуктором.
Ну и вообще кондуктор ни о чем. Не намного сложнее делается нормальный, позволяющий сверлить не только по диаметру, но и по хорде. Естественно речь идет о точности плюс минус лапоть, изготовление точной оснастки на коленке, без соответствующего оборудования малореально
👍
Спасибо, я прислушаюсь к вашему мнению 🫡
А у него все тяп ляп.
@@3fontelefon945 а у тебя? Или не чем похвастаться 🤣
@@MA-SHА зачем?
Hopeless
👎
Dumb
👍
Time to unsubscribe. What a waste of life
Ok thanks
Круто.Респект мастеру
Огромное спасибо 🤝
Mega
👍
Thanks Alexander
I learnt a long time ago that some jobs need accuracy, and the method we have used in Industry does not fall under that title most of the time.
I have made, and have been given great ideas of making precession Jiggs and Tools to improve on accuracy.
I appreciate tips like these as it only make thing's fit perfectly, and make's the finished job so neat and professional.
Anyway I thoroughly appreciate this tool and I will be starting on my own jig in the morning.
Just the way I feel.
👍😁 🥸
Hello friend 👋Thank you so much 😊
Redicuous so tedious .😂
👀