How to Replace the Battery in a Harman Kardon Onyx Studio 1/ 2/ 3/ 4
Vložit
- čas přidán 6. 09. 2024
- Replacing the battery in a Harman Kardon Onyx Studio 1 can be a bit tricky and requires some technical expertise. Here are the general steps you can follow:
1. Make sure the Onyx Studio 1 is turned off and disconnected from any power sources.
2. Remove the rubber ring that covers the screws at the bottom of the speaker.
3. Use a screwdriver to unscrew the four screws.
4. Carefully lift the bottom cover of the speaker and disconnect the battery connector.
5. Remove the battery from the speaker and replace it with a new one.
6. Reconnect the battery connector and carefully put the bottom cover back in place.
7. Tighten the screws and replace the rubber ring.
Note that replacing the battery in a Harman Kardon Onyx Studio 1 requires some technical expertise and can be risky. If you are not confident in your ability to replace the battery, it is recommended that you take the speaker to a professional for battery replacement.
########[ Main Items in This Video ]##########
Buy Battery Replacement for Onyx Studio 1/2/3/4: amzn.to/3qntWft
#####################################
=======[ Links to tools that I use ]=======
Opening Tools:
-Screwdriver (for Game Consoles): amzn.to/43okRBM
-Screwdriver (for Mobile Phone & Tablet): amzn.to/3MJSI0D
-Security Torx Screwdriver: amzn.to/45Mh2YE
-Electric Cordless Screwdriver: amzn.to/3CbZ0Be
-Opening Pry Tools: amzn.to/42myYpP
-Tweezers Set: amzn.to/3MPmyAZ
Microscope Set:
-Microscope (Main): amzn.to/3C709tX
-Microscope (Secondary): amzn.to/43EEZiu
-Microscope Ring light: amzn.to/3WMYlzG
-Microscope Camera: amzn.to/43jco2r
Soldering:
-Hot air station: amzn.to/3WI0Jba
-Soldering Station #1: amzn.to/3OQBWQ3
-Soldering Station #2: amzn.to/3N6UDxH
-Desoldering Rework Station: amzn.to/43x8yT2
-Flux: amzn.to/45JxHvE
-Solder Paste: amzn.to/3WHXMHF
-MotherBoard PCB Holder: amzn.to/3oSvwp0
-UV Solder Mask: amzn.to/3oITKSC
-Desoldering Wick: amzn.to/43FZKuo
-Soldering Mat: amzn.to/43mycdy
Electrical:
-DC Power Supply (Main): amzn.to/3MOjViY
-DC Power Supply (Secondary): amzn.to/3qefh62
-Multimeter: amzn.to/3N73Mq9
-USB Current Tester: amzn.to/3WMYWlh
-Heating Pad Smartphone/Tablet: amzn.to/3WJT7VH
Software for Board View & Schematics:
-FlexBV: pldaniels.com/...
-Phoneboard: phoneboard.co
-ZXW Tool: amzn.to/3C5e5EG
Thermal Camera:
-Seek Compact Pro: amzn.to/3N5XENR
Recording Gear:
-Ring Light: amzn.to/3qlPYPI
-Wireless Microphone: amzn.to/3ITGKAt
#### Disclaimer ####
xFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All material provided within this CZcams channel is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
xFix does not make any claims of the safety of the projects, techniques, or resources listed on this channel and will not take responsibility of what you do with the information provided by this channel. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not xFix. Please do not attempt anything contained in this video unless you accept personal responsibility for the results, whether they are good or bad.
Thanks.. i immediately ordered a replacement battery and will be confidently replacing it.
Outstanding DIY vid. Wasn’t sure if I could find tutorial on this. THANK YOU!!
Awesome! I had returned a speaker still under warranty, but the same problem occurred with a newer model, that was out of warranty. Now, I have a solution. Thanks!!
Your video was of great help. I purchased a new battery and replaced it as per your instructions. Working perfectly. Thank you very much.
Your video helped me change the battery for my speaker and it works. Thanks
Thank you. Very helpful
On a side note ... I really like your accent Very professional 👍.... From 🇺🇸
Hi, I’ve just been given one of these speakers, the power cord is working fine as I’ve checked the ends with my tester. But the speaker doesn’t work? Would that be the battery?
Thank you for this! 😊
💪😍
Thank you very much 🤗
mine is only sound beep once turned on and the turning it off again eventough I put it on the charging. is this the battery problem or not?
wonderful. where do i find battery... and where did you get that handy screw driver
What kind of screws does the onyx studio 1 have? is it tork.screws? and if it is indeed tork screws, what number? Thanksss for the reply.
Hello, I can't find one to deliver in my country except LI11B001F Battery from Germany but the description says it's for Studio 1 and 2... the standard battery is compatible with all HK-Onyx Studio 1 -2 -3 -4 speakers? Would something be wrong If I buy the Li-PO for Studio 5 and 6 or should I stick with the Li-IO ?
Thank you for the excellent details, I just ordered a new battery ... Mine works perfect when plugged but immediately turn off when I use it with the battery..any other possibility of damage??
That symptom means It needs a new battery.
Thank you good video, just try change onyx 2 battery, accidently ordered 4 pin battery ( onyx 5 modell) think is it possible to use, or just order new one with 3 pin?
What is the specs of the new battery you installed
Buy Battery Replacement for Onyx Studio 1/2/3/4: amzn.to/3qntWft
Thank you
What does the white wire on the battery do?
Thanks for share 👍
I found a battery for my onyx studio 3 it is 4000 mah can I install that instead
Yes, it works.
How do you know what number speaker you 1,2,3,4?
The battery is same on the Onyx Studio 1, 2, 3,4
123&4 are the same battey?
Yes
where i can buy that battery ❤
You can purchase it off eBay.
Buy Battery Replacement for Onyx Studio 1/2/3/4: amzn.to/3qntWft
thaks a lot
I Have Similar Speaker However It's Not A Good Speaker Charge Time To Long And No Meter Full Charge Read Out , Will Replace With Less Time Charge Speaker