Thanks! Has had a couple more changes since this video, different exhaust due to the custom one falling apart. I need to fix the car it has been down for over a year but I do have some sand videos I need to edit.
This one wasn’t really much of a kit. 60% of the cage was a small kit but no idea from where. Front suspension is one off using rhino spindles, rear drive is one off using vw parts.
nic dega the front spindles are from a Yamaha rhino and I built my own arms from scratch and the rear is a 3 link design like a razor xp but used a vw bearing hub and axle and my own setup
I made the center section my self. It is based off of the simple setups that just run a big sprocket and a brake rotor. Mine is a mix between a little bit of machine work, some vw type 1 driveline parts and some big bearings. I have about 400miles on it with a gsxr1000 engine and it is holding up good so far.
Jesus! Just give it some throttle already!
What brand of steering box are you running?
It was mostly my own design. I don't really have anything posted anywhere else. It was a basic cage that I did a lot to and my own suspension.
To ride like this put in 125cc.
Yeah I know haha. This was its first good test run.
Well at least when you sell it you can genuinely say it hasn’t been thrashed
Looks super fun John. You did n awesome job on it from what I can see, it handles awesome and sounds perfect
Thanks! Has had a couple more changes since this video, different exhaust due to the custom one falling apart. I need to fix the car it has been down for over a year but I do have some sand videos I need to edit.
New item for the bucket list! What a great video
хорошее видео! и аппарат достойный!!!
Was the throttle jammed or something 🤔
Haha no. This was still in the testing stages of the new engine set up
Front steering is opposite of what it should be as far as the Ackerman effect
Awesome! do you have more info/photos up somewhere? Did you build it to plans or your own design? Great job!
I bought a buggy that is very similar. It is called Badland buggy’s. They have a website online
This one wasn’t really much of a kit. 60% of the cage was a small kit but no idea from where. Front suspension is one off using rhino spindles, rear drive is one off using vw parts.
Very nice buggy, what suspension did u use?
nic dega the front spindles are from a Yamaha rhino and I built my own arms from scratch and the rear is a 3 link design like a razor xp but used a vw bearing hub and axle and my own setup
ماشاءاللّٰه
Awesome video, what shocks are ya using?
These are fox shocks. Non resi.
Do you have a spool in the back? sprocket/chain?.. single? dual?... nice buggy... im planning to do a mini class 10 two seater... a-arms...
I made the center section my self. It is based off of the simple setups that just run a big sprocket and a brake rotor. Mine is a mix between a little bit of machine work, some vw type 1 driveline parts and some big bearings. I have about 400miles on it with a gsxr1000 engine and it is holding up good so far.
Just for shits and giggles what was the end build cost for that beast?
gary rimington I’m trying to remember but maybe around 3 1/2 to 4K
john stiles awesome job where can I buy one haha
That’s so cheap wtf
Valk I either got a good deal on parts, had the parts, and fabed thing my self to keep the cost really low
where on the california desert is this? It looks fimilar
its in the antelope valley out by some property i have way east side of lancaster ca
john stiles I was going to say it looks like apple valley or Barstow... I grew up 30th East and Ave H ::)
I was thinking the same thing I live in Boron looked familiar to me too
@@johnstiles6456 I'll trade you for a 2016 rzr xp 1000 4 seater
Foot clutch... no
Makes it easy to take off. I had a different style using my hand but this made it easier.