Repairing A Chevy Aveo Dash Clock

Sdílet
Vložit
  • čas přidán 20. 08. 2024
  • This summer, I noticed my dash clock kept resetting, and I got tired of setting the clock over and over. Here's how I fixed it.
    Music: www.bensound.com

Komentáře • 38

  • @kevinfaubion5283
    @kevinfaubion5283 Před 5 měsíci +1

    Thank you for the short, informative, and well edited repair video!

  • @konman10000
    @konman10000 Před rokem

    Gotta love unleaded solder slowly getting vibrated apart in the heat 🤦 Thanks for the video man!

  • @mrg7144
    @mrg7144 Před 3 lety +2

    Thanks for the advise been bugging me for a couple months haha just cleaned it without soldering workS!! Shout out to the Aveo community!!!

  • @brandonpetrilla1731
    @brandonpetrilla1731 Před 2 lety +1

    Tried soldering mine, The clock worked again and held time but started flickering 2 months later and drove me nuts, I broke down and spent the $67 dollars for a new one, Worked perfect since.

    • @TimBledsoe
      @TimBledsoe  Před 2 lety +1

      Sometimes that’s just what you gotta do. Sorry it didn’t fix it

  • @ItachiFan137
    @ItachiFan137 Před 3 lety +5

    Was excited to see this fix but I've never soldered anything before nor have the tools so I guess I'm out of luck on that department. nice information here either way. Thank you!

    • @TimBledsoe
      @TimBledsoe  Před 3 lety

      You're welcome. it's possible it might fix with just cleaning the circuit board. In my case the melted original solder was making a short.

    • @ashleyredden2201
      @ashleyredden2201 Před měsícem

      They are 10 bucks on ebay it's easy to use it

  • @arjenhager7852
    @arjenhager7852 Před 3 lety

    Hi, worked for me, Just soldered and it never resetted again 15min fix!. Thanks very much!!

    • @TimBledsoe
      @TimBledsoe  Před 3 lety

      You're welcome, glad it worked out for you!

  • @greenmozingo
    @greenmozingo Před 6 měsíci

    Dude thank you for drawing me away from my useless barbarian style of fixing things. Now my fist can heal from using a hammer fist on clocks and the like. This really WORKED!

    • @TimBledsoe
      @TimBledsoe  Před 6 měsíci

      Glad I could help but I'd watch a video of how you repair clocks! 😂

  • @Collinnaidoo5276
    @Collinnaidoo5276 Před 4 měsíci

    Thank you i will try this.

  • @xiaokia74
    @xiaokia74 Před 2 lety

    If you keep ignoring the clock keep resetting, the airbag light will trigger once the clock going faulty. ^^ It go faulty but the clock still can use.

  • @traficamcapetownsouthafrica

    Thanks for sharing, mine was replaced by the dealer under warranty.

  • @dauman1442
    @dauman1442 Před rokem

    Thanks man very helpful🎉

  • @YoutuberRick18363
    @YoutuberRick18363 Před 3 lety +1

    What do you mean by resetting? Ours will not display the time randomly. It'll come back and still be keeping time.

    • @TimBledsoe
      @TimBledsoe  Před 3 lety

      Congratulations, you don't have the problem this video addresses.

  • @sabarlow80
    @sabarlow80 Před 3 lety +1

    Nice work 👍

    • @TimBledsoe
      @TimBledsoe  Před 3 lety

      thanks

    • @sabarlow80
      @sabarlow80 Před 3 lety

      @@TimBledsoe mine would reset everyday . After this not once. Thanks

    • @sabarlow80
      @sabarlow80 Před 3 lety

      @@angelamadrid3235 I did both. Still no problems

  • @Holy_Quran_Memorizer2024

    ألف شكر .. من مصر 💖
    Thank you very much .. from Egypt 💖
    Mille mercis .. du Egypte💖

  • @danielmaxter1928
    @danielmaxter1928 Před rokem

    Is there a way yo set this to show European style 24 hours instead of American 12 hours PM, AM?????

  • @ahmedsamy7630
    @ahmedsamy7630 Před rokem

    please, what is the solution that is used for cleaning ??

    • @TimBledsoe
      @TimBledsoe  Před rokem +1

      I used 70% isopropyl alcohol because it would dissolve and not make an electrical connection later

    • @ahmedsamy7630
      @ahmedsamy7630 Před rokem

      @@TimBledsoe thanks for your reply .. do you think that isopropyl alcohol is more gentle on surface and electrical components?

  • @corriesnow6689
    @corriesnow6689 Před 3 lety

    Didn't work on mine. still resetting

    • @TimBledsoe
      @TimBledsoe  Před 3 lety +1

      Bummer. sorry that didn't work for you

  • @joeylaplante9635
    @joeylaplante9635 Před 7 měsíci

    video would be better without the music. I'm not sure why you'd add music in to begin with, let alone how loud it is.

  • @TerryG001
    @TerryG001 Před rokem

    Thanks for the vid, but PLEASE take the stupid music off. This isn't a music vid. It extremely irritating.

    • @ashleyredden2201
      @ashleyredden2201 Před měsícem

      Who cares it gave u the info u needed didn't it... pretty sure he doesn't have to do videos as u desire hin too