Does anyone know if the 2 Drawer packouts should fit snuggly onto a full sized mount? I ask because the packout boxes I have all cleate in/clip extremely snuggly into each other but the 2 drawer packout I bought has a lot of play after being cleated/clipped in.
@@FixerMerlin Thank you! I went pack and double checked. Some of my boxes have play too it just seems like a lot less when they're weighed down with stuff. Thanks for your reply!
Ya I checked some of my boxes too and some seem to have more play than others but I’ve never actually noticed until you pointed this out. But ya once they’re loaded up with weight it’s not very noticeable.
I’ve got pretty much the same 2 drawer finish nailer setup. M18 18ga in one with nails in the divider. M18 15ga in the other. I’m hoping the M12 23ga will fit with the 15ga.
Depends. I prefer a working out of the trailer especially if I can plug in, and I can show up with everything I need. If it’s just something small I grab my main tool bag as well as any other tools and use those totes to bring those to the work area. There have been times when I moved quite a few of the boxes longer term onto a job site, or into the workshop. Ive done that carrying them one by one or with the wheeled base boxes.
czcams.com/video/RGTBs4LaAEs/video.html Many times for smaller service calls I just need this main tool bag and any drill or drivers etc that need to can go in a secondary bag
Perfect packout upgrade
I agree the drawers are the perfect addition to your packout setup
He did it again! Solid video! Exactly what I was looking for
Does anyone know if the 2 Drawer packouts should fit snuggly onto a full sized mount? I ask because the packout boxes I have all cleate in/clip extremely snuggly into each other but the 2 drawer packout I bought has a lot of play after being cleated/clipped in.
Now that you mention it there does seem to be a bit more play in the drawers, but it still locks together
@@FixerMerlin Thank you! I went pack and double checked. Some of my boxes have play too it just seems like a lot less when they're weighed down with stuff. Thanks for your reply!
Ya I checked some of my boxes too and some seem to have more play than others but I’ve never actually noticed until you pointed this out. But ya once they’re loaded up with weight it’s not very noticeable.
I’ve got pretty much the same 2 drawer finish nailer setup. M18 18ga in one with nails in the divider. M18 15ga in the other. I’m hoping the M12 23ga will fit with the 15ga.
Is that the pin nailer, how do you like it?
Will the m18 super hawg fit in this pack out ?
I think so but not 100% sure. I can try it and get back to you
@@FixerMerlin Yes, that would be nice.
I have been looking for one for the past 3 months.No where to be found , a two drawer packout .!😩
Don’t know where you are located but I saw that Home Depot had some 2 drawers in stock today
Order on line Home Depot
I'm curious if or how you go about moving these stacks into the jobsite
Depends. I prefer a working out of the trailer especially if I can plug in, and I can show up with everything I need. If it’s just something small I grab my main tool bag as well as any other tools and use those totes to bring those to the work area.
There have been times when I moved quite a few of the boxes longer term onto a job site, or into the workshop. Ive done that carrying them one by one or with the wheeled base boxes.
@@FixerMerlin Cool - thanks!
czcams.com/video/RGTBs4LaAEs/video.html
Many times for smaller service calls I just need this main tool bag and any drill or drivers etc that need to can go in a secondary bag
@@FixerMerlin Very interesting. Our main bags are very similar. Thanks for the link!
What kind of work do you do? I think a lot of tradesmen will have some of the same basic tools and others more specific to the kind of work you do
is that a super sawzall in there?
Not sure? it’s one of the m18 sawsalls, I think they make even bigger ones
Can the skilsaw fit in the 2 drawer unit?
Like the circular saw?
@@FixerMerlin I would like to know this as well. Wondering if my 6 1/4 circ saw will fit
@@trevortautolo7181 czcams.com/users/shortsyaWe8MzPrYY?feature=share
@@FixerMerlin thanks for the reply! Appreciate that
@@trevortautolo7181 much obliged!
These frickin thinks are as expensive as the tools
True but I’d say a tool box is a tool, and like with most things in life you get what you pay for!