Hisense WFEA6010 - Test/Service Mode
Vložit
- čas přidán 11. 09. 2024
- to access the test cycle, power on machine with door shut, turn to spin, press function/option 2x then press start/pause 2x, both within 5 seconds, the display will change, press spin, temp & option to start test cycle, each button will test a different area of the display
once started the test cycle is as follows
C0: Door locks
C8:
C1: Water inlet valve x 3 compartments
C2: Motor functionality both ways & heater
C3: Drain pump
C4: Spin
C5: reset
display returns to standard one complete
please take a look at my amazon wishlist:
www.amazon.co....
I also filmed a test mode of a hisense good video 😊
I did the service test it shows f
Please how to reset this washing machine?
Looks no bad like good machine
F06 ошибка мотор выглядит исправным щетки звонятся реле щелкает в чем проблема?
I did the service test, on F 03 it stuck it bibs
F04 error at end of successful wash - any ideas? manual says electric module (already tried replacement circuit board, and also replacement door latch). Test/service cycle doesn't have problem.
Possibly a pressure switch issue
@@servisslimline ah forgot pressure switch was replaced too. I have a hunch its heating element but test cycle didn't pick it up so who knows.
@dev8763 did you resolve? I have F04 at end of cycle and replaced heating element and NTC but heat does not generate unless on a drum clean cycle at 95c, at my wits end with it - won't be buying a hisense washing machine again I know that!
@@DomX2008 no resolve.
I am out of ideas because between me and you everything electric got replaced it seems, except wiring. It makes no sense.
Hisense make diagnosis impossible so people forced to pay service fees or buy new.
@@dev8763My gut feeling was to throw in the towel as it could be so many things, as it was only heating on the drum clean cycle I thought maybe replacing control board but we’re talking £100+ for just that and then there’s no guarantee it will resolve, going to go Bosch or Samsung I think! Thanks for the feedback on your experience
And F13 error What isthis error?
I have an F2 error. The guide says water supply error. How can I fix it? Cheers
Might be a faulty inlet valve
Hi, did you manage to fix this? I have the same error please let me know.
F5 ERROR how fix plis
Alguien sabe cómo puedo quitarle el bloqueo de niño?
premu kaj tenu kune "temp" & "opcio".
hisense xqg90-hr1214 test service mode error f22
unplug machine and wait a few mins, plug in and try again, otherwise it could be a door l lock issue from what i can see