Big up king. Love these videos. Would have been nice if you did a series where you show most (not all) steps in building a PROPER system from scratch, what you need from processors to amps etc. I think nuff people don't know the basics and would benefit from revisiting basics.
Nice and compact. That little sound is all I would need. Not too many big places here on staten island where you would to bring out a big sound. Little man is learning fast
Great job bro. I know it was kicking in that room 4 18's on a side. Wow!! nice. It was also good to see the young man programing the system, Pass on the knowledge to the next generation.
Manners and respect general this is the information and schooling me should of get from the 80,s when me start in the business I still feel I don't know much as I was more concerned with the music side but as we know if the sound system no set good it doesn't matter what music you have keep up the good works because sound system not easy 🙏🏿🤴🏿❤️💚💛🖤👊🏿
Great video Acid nothing like when you make something for yourself you appreciate it more because you know the work that goes into it Great video watching you wiring and putting stuff together bring back memories nuff respect youth keep up the good work keep the sound system ting alive 👍 👍 🙏 🙏
That's some nice stacks, two years ago I built out my rack and I didn't go through the trouble of custom making the bracket I picked up a generic bracket which had knockouts across the whole thing. and I filled all of them up. Would I do it again yeah it allowed everything to be lined up and if I needed to put something in the future and didn't use them I could've left spots filled in. Other than that every rack is different it's a matter of figuring out what works for what you want to put into it. I had the idea floating around in my head for a good 5 to 8 years adding and removing things from a B&H wishlist and slowly taking them off. Although I didn't use the included rack ears to mount my XR18, I was trying to think how I wanted to do that and pass the cables through. buy brackets with holes, put my own holes in? I ended up getting a shelf with slots in it I think it's for venting and then made some wood brackets to act as stops along the sides and back. Then I put some threaded inserts in on each side and made a square piece of wood with a slot that let me push them in and lock down on mixer over the rubber on the sides. So if I wanted to remove the mixer for something else it's two thumb screws and out after I pull all the cables of course. This allowed all the cables to come from left and right and swoop in to the front. I also built my rack with the UPS to keep the digital mixer from resetting in case there's power issues that way the power can go out and come back on and my amps can come back on but all my data communications and digital stuff can just stay on and humming away. The added benefit is I can cold start the UPS and turn the lights on! Unfortunately I didn't add enough RGB yet to make it go faster. I did one event with somebody else's system after getting everything set up the power went out I was beginning to ponder how tearing down in the dark was going to be with just a couple of flashlights when the power came back on. Heading to UPS is nice insurance you can always plug in some lamps if that happens. This was a personas mixer and one of the times we had a power blip in that location was right after soundcheck I was walking back with my iPad and this was pre-motorized faders so the power went off and back on and the mixer reset to where all the feeders were.....
Big up yuhself mi General. Love the video and work that you put in. The sound system well neat and put together. Respect how yuh bring the Juvenile to the game and teach him the skills. Keep up the good work
respeckk acid i wish i had these info back in the 90's when i was having trouble cause no sound man would'nt help us because they don't noboby sound play better than their's ..thankz
Nice cool neat sound system , love it .I want to reduce my amp rack ro that size but i first have to get some cvr ok k35 .my present amps are two bulky and heavy .That js the spyn 4400 and srx3300
@@AcidSoundSystem I have beed watching your channel from 2021 and i love your content. I also have a small sound system that i wouldn't mind getting some ideas from you, I am located in the Cayman Islands
Taking pride in what you do it's the only way to fly anything other than that you're slumming and you ain't going to get to work but one of the things I do have to give you guys Kudos on but I love that you do cuz I do it myself I feel for systems myself and man to build your own boxes man you saving yourself so many thousands of dollars I'm and I mean the money that you can spend on one block store you can take that same money and build yourself probably four boxes depending on what kind of boxes you building but y'all keep rocking man my favorite thing is Carnival I love it especially when they doing it you know being Baltimore where I'm at I don't live in Baltimore but I'm not too far from them like 45 minutes from Baltimore but I really did the scene you know for me you know for me I I dig the scene because one my grandmother my father's side was Jamaican and my dad's from the wolf Clan so you know I'm indigenous in Jamaican y'all keep kicking it man keep the love going cuz it's it's really really coming across the videos and you're out there and you doing your thing man jerk chicken and cooking it with it's all coming across the video man and you know it's all love from here anyway y'all blessed
Yes when you can do it yourself its alway good to see the finished product. And if you can and you need to get the help its still a journey and great to see the finish results
Power Source and Distribution - A lot of DJs don't have a clue and need to be thought. Too many DJs are still plugging there all of their gear onto one 15-amp (shared) circuit.
If it's not too much to ask But if you get another chance like this I would love to see the whole set up like how the amplifier get connected to the Driver yk Bless stillz🙏
@AcidSoundSystem Are there any details about the subwoofer enclosures design? It looks like it could be a horn-reflex hybrid with double-ESW1018 or double-LS808 horn path, but I could be mistaken.
JBL Law Distance Wire Size up to 25 ft. 16 AWG 26-40 ft. 14 AWG 41-60 ft. 12 AWG 61-100 ft. 10 AWG 101-150 ft. 8 AWG 151-250 ft. 6 AWG Yes, ALL your short connects (back of amp to rack speakons and from speaker to cabinet speakons) should use 6 gauge wire as to not have a weak point in case you use long run 6 gauge wiring. More info on the mid, hi box would've been nice.(Whats in it, who made it etc?)
I've noticed these sounds always seem to be comprised of passive speakers. I used to own a super powerful system (around 6000 watts) based on an ACTIVE speaker and Sub pairs. Just wondered why you guys tend not to use an active array of speakers, is it just a based on tradition?
Yes it's Sound System Culture which orginated in Jamaica...you can check CZcams and you can see other videos on it...other countries have now participated over the course of time US, UK, PHILIPPINES, INDIA, JAPAN, ETC
Much respect but I have a question regarding your power destroy draw on the input side are you running 120 or is it 240 input ? Most dance halls have 20 amp walls right and are you running off their wall sockets or you running into their power panel at 240 Washer and dryer current ?
@@AcidSoundSystem cool 😎 ,I have another question 🤔 1st thanks for the response I appreciate it Hey the speaker cables do you make them yourself or did you purchase them from a company the 4 or 6 conduit cable how do you have that for your speaker box ? Thanks again friend. 😎
Bwoy to build a sound ain’t cheap, respect to the sound owner and engineer
For real in real life
Big respect Acid. Love how you're teaching your son the business. Best wishes for success & prosperity
Thank you - I appreciate it
Big up king. Love these videos. Would have been nice if you did a series where you show most (not all) steps in building a PROPER system from scratch, what you need from processors to amps etc. I think nuff people don't know the basics and would benefit from revisiting basics.
Thanks...I will have coming up soon
👍
🙌🏿🙌🏿🙌🏿
Yes!!!
Very impressed with your work and how you are here to teach. Wish more people were like you. BLESSINGS BREDDA!!!
Thanks 🙌
As a sound system enthusiasts, I hereby subscribe, and hit the notification bell for this channel. I found it to be the best.
Thanks I truly appreciate it 🙌
Love the way you a teach Your son the workings of the things. From playing to installing and programming equipment. Big up self Acid 🙏🏽👊🏾✌🏽
Yes I appreciate it
"BATMAN & ROBIN" !!! THE DYNAMIC DUO! GOOD JOB 👍👍
Lol..thanks
Nice and compact. That little sound is all I would need. Not too many big places here on staten island where you would to bring out a big sound. Little man is learning fast
Yes he is...thanks
Father & son team great work Love the dedication.
keep flying high my friend for those who can’t keep up will fall off at some point!
🙌🏾 Bless up mi bredda…thanks for the encouragement
Great job bro. I know it was kicking in that room 4 18's on a side. Wow!! nice. It was also good to see the young man programing the system, Pass on the knowledge to the next generation.
Thanks for watching -- yes he has been in this with me since a baby...he loves sound as much as I do
Real deal Acid Sound, MAXIMUM RESPECT. Killa One Sound sending Blessings and Strength to keep doing the work you love King.
Bless up Killa One Sound ✅️✅️✅️💯💯💯
Manners and respect general this is the information and schooling me should of get from the 80,s when me start in the business I still feel I don't know much as I was more concerned with the music side but as we know if the sound system no set good it doesn't matter what music you have keep up the good works because sound system not easy 🙏🏿🤴🏿❤️💚💛🖤👊🏿
Thank you and me both...u had to learn the hard way...I advised my son he should appreciate it because it much easier for him
Love the videos love the sample music love here the sound from one sound tec to another keep up those builds
13:38 the grom on the dials is the future! Big up music artists world wide from London UK
Thanks for watching 🙌 🇬🇧
Great video Acid nothing like when you make something for yourself you appreciate it more because you know the work that goes into it Great video watching you wiring and putting stuff together bring back memories nuff respect youth keep up the good work keep the sound system ting alive 👍 👍 🙏 🙏
Thanks 🙌
Blessings Fam love when you do very informative
Thanks 🙌
That's some nice stacks, two years ago I built out my rack and I didn't go through the trouble of custom making the bracket I picked up a generic bracket which had knockouts across the whole thing. and I filled all of them up. Would I do it again yeah it allowed everything to be lined up and if I needed to put something in the future and didn't use them I could've left spots filled in.
Other than that every rack is different it's a matter of figuring out what works for what you want to put into it. I had the idea floating around in my head for a good 5 to 8 years adding and removing things from a B&H wishlist and slowly taking them off.
Although I didn't use the included rack ears to mount my XR18, I was trying to think how I wanted to do that and pass the cables through. buy brackets with holes, put my own holes in? I ended up getting a shelf with slots in it I think it's for venting and then made some wood brackets to act as stops along the sides and back. Then I put some threaded inserts in on each side and made a square piece of wood with a slot that let me push them in and lock down on mixer over the rubber on the sides. So if I wanted to remove the mixer for something else it's two thumb screws and out after I pull all the cables of course. This allowed all the cables to come from left and right and swoop in to the front.
I also built my rack with the UPS to keep the digital mixer from resetting in case there's power issues that way the power can go out and come back on and my amps can come back on but all my data communications and digital stuff can just stay on and humming away. The added benefit is I can cold start the UPS and turn the lights on! Unfortunately I didn't add enough RGB yet to make it go faster.
I did one event with somebody else's system after getting everything set up the power went out I was beginning to ponder how tearing down in the dark was going to be with just a couple of flashlights when the power came back on. Heading to UPS is nice insurance you can always plug in some lamps if that happens. This was a personas mixer and one of the times we had a power blip in that location was right after soundcheck I was walking back with my iPad and this was pre-motorized faders so the power went off and back on and the mixer reset to where all the feeders were.....
Much respect ! Nice and neat thank you for teaching !! Love your videos braddren !!
Thanks!
Love from Sierra Leone 🇸🇱 West Africa 🌍
Bless🙌💯
Big up yuhself mi General. Love the video and work that you put in. The sound system well neat and put together. Respect how yuh bring the Juvenile to the game and teach him the skills. Keep up the good work
Thanks🙌
Up top Acid family well put together
Thanks 🙌
Professionally done. just discovered your channel .respect
Thanks..appreciate it 🙌
Give thanks king
Big up Strap Movements
Fully Good Acid - u ting up💥🔥🔥🔥🔥
Thanks !
Right click…Bro😂😂😂😂. Nuff respect…great work every time
😅 Have to let dem know....Bless up and thanks for watching the channel 💯
Great video! Very informative, keep creating more content like this...👍🏾
Thanks
This is good work bredda !!!!! That's how I want my sound to be damn neat jah jah !!!!!
🙌✅️✅️✅️💯💯💯
#Acidsoundsystem. Thank you for showing this respectful brother look for more update.
Thanks
Love this..I’m learning so much bro 🇯🇲🇯🇲
I enjoy your videos ,neatness is always on point 💯
Love how the ute is involved
Respect🙏🙏🙏
I appreciate that..thanks for watching
Nice work Acid 👍🏽👍🏽
Thanks
Great 👍 job my brother 👏 👍 🙌.
Thanks
You do awesome work. I'm really learning alot
Thanks for watching the channel
Your son is next generation he talented
Appreciate it..
Nice gadgets i hope someday i can own same like that....god blesse the groups..
🙌🔊🔊🔊💥💥💥
Man the heck Urban naysayers keep on doing what you doing bro I'm loving it
🙌 Thanks for watching the channel
Nice sound. Respect the videos and the quality insights you give. May I ask, is there a an expander on acid sound in this video?
This is not Acid Sound System its a sound I was working on.
Big ups always enjoy
Excellent tutorial once again Acid. Keep doing yuh ting 🔥🔥 Noah gwan tuff on da basssssss 🔥🔥
Thanks - appreciate you watching the videos
Nice and clean Good job!!!
Thanks 🙌🏾
Very good bill fam love it sounding gd
Fine worksmanship Acid.
Bless up 🙌
respeckk acid i wish i had these info back in the 90's when i was having trouble cause no sound man would'nt help us because they don't noboby sound play better than their's ..thankz
Thanks🙌✅️✅️✅️
Smart sound
STARLIGHT SOUND CHECK IN BIG UP SELF MY BRO GOOD JOB SOUND CLEAN!!!!!
✅️✅️✅️✅️💯🙌
I love this,, question? What the best sequence 1,2,3,4egs compression/EQ/EFFECT/preamp/ mixer ??😊
Like it mi boss
Noah sounded nice bro 👍🏻💥💯💯
Thanks 🙌
Great work
Thanks
Nice cool neat sound system , love it .I want to reduce my amp rack ro that size but i first have to get some cvr ok k35 .my present amps are two bulky and heavy .That js the spyn 4400 and srx3300
Love the quality
UK In the house
🙌🔊🔊🔊💥💥💥
Thank you bro, I love sound system so much.
Thsnks for watching the channel
@@AcidSoundSystem I have beed watching your channel from 2021 and i love your content. I also have a small sound system that i wouldn't mind getting some ideas from you, I am located in the Cayman Islands
Another awesome build. Nice and clean and professional. Where did you say you get your wire from?
sound really good
Thanks
Great sound system papa mi love you 💗
Yooo Acid. I want you go in detail how you hook and wire up all the amps and thing them. Please.
Waiting on that too on tuning cause no one do a video about that as yet
It's coming soon..
Jacksonville Florida 🎧🎤🎶🎼🎵🇯🇲
🔊🔊🔊💥💥💥
Acid can you tell me where I can get one of those distro box to buy thanks
Link me @ACID SOUND SYSTEM
Definitely would like to have one of those distro myself. Been looking but can't find one anywhere
One of best to do it 👌🏾🤲🏾
Thanks for watching 🙌
Want to see the programming too. What are the crossover points and the delay settings?
Brah thanks .keep them coming
🙌✅️✅️✅️💯💯💯
Can you send a link to the website where you said you get your wires done. Thanx.
Their website is down, Bronx Speaker & Electronics.
Thanks
that s super clean!
Thanks 🙌
big machine man respect
Big up king. Love the video. Would have been nice if you had listed the place where you purchased the amps and other processors and eq.....thanks
Taking pride in what you do it's the only way to fly anything other than that you're slumming and you ain't going to get to work but one of the things I do have to give you guys Kudos on but I love that you do cuz I do it myself I feel for systems myself and man to build your own boxes man you saving yourself so many thousands of dollars I'm and I mean the money that you can spend on one block store you can take that same money and build yourself probably four boxes depending on what kind of boxes you building but y'all keep rocking man my favorite thing is Carnival I love it especially when they doing it you know being Baltimore where I'm at I don't live in Baltimore but I'm not too far from them like 45 minutes from Baltimore but I really did the scene you know for me you know for me I I dig the scene because one my grandmother my father's side was Jamaican and my dad's from the wolf Clan so you know I'm indigenous in Jamaican y'all keep kicking it man keep the love going cuz it's it's really really coming across the videos and you're out there and you doing your thing man jerk chicken and cooking it with it's all coming across the video man and you know it's all love from here anyway y'all blessed
Yes when you can do it yourself its alway good to see the finished product. And if you can and you need to get the help its still a journey and great to see the finish results
bro can u make a video setting up the Behringer Dcx processors
Hola, por qué usan 2 DriverRack Beheringer y 1 Dbx? Cual es la funcion de los 3?
Playing stero..left and right..and dbx plays bass
Respect :)
Bronx speaker is the best
Power Source and Distribution - A lot of DJs don't have a clue and need to be thought. Too many DJs are still plugging there all of their gear onto one 15-amp (shared) circuit.
Any plans on how to build similar top end speaker box?
Try the website speakeplans.com
You didn't need all that drive racks one alone could do the job my opinion
Well done sir
If it's not too much to ask
But if you get another chance like this
I would love to see the whole set up like how the amplifier get connected to the Driver yk
Bless stillz🙏
Yes I should gave that coming up soon
Big up man greetings from uganda 🇺🇬
Excellent Job-!!!!
Thanks I appreciate it🙌
Mr.harris ( BOSTON RD )built my grandfather (DISKY BARBER SHOP ) sound for him back in the day… 3 column full a crown amps
Yes long time I know Mr Horace. I bought my fist piece of equipment from him. He's an icon ✨️ in the sound equipment business
@AcidSoundSystem Are there any details about the subwoofer enclosures design? It looks like it could be a horn-reflex hybrid with double-ESW1018 or double-LS808 horn path, but I could be mistaken.
great video !!!
Thanks Ghost 🙌💥💥💥
Wicked.. no music no life
🙌💯💯💯
Very nice work! Great vids as always 🔊🔊🔊🔊👌🔥🔥
What is the track name first one 11:49..? Thanks
Chase vampire riddim (east coast records)
@@jesseedmund8322 thank you very much✌️🔊🔊🔥🥂cheers!
Thanks for the knowledge. Quick question, Why use 3 processors ( Drive Racks) What function does each perform? Thanks in advance
Nice sound system.fr.JLP disco mobile
Thanks 🙌
Nice work acid
How things is what you and Noah going on the new sound system?
Big up good job brother 💯....what's the name of the riddim plz?
I like your boxes. Can you tell me which tweeters and drivers are in the boxes?
Sound good 👍
Thanks 🙌
I had to comment twice..bro that shit sound good. I could imagine how it sounds in person..do you build the box and select the speakers as well?
Thanks.. Some people have the speakers already unless they want a suggestion. Yes boxes are built by my team.
Respek fam
real talk mi g
JBL Law
Distance Wire Size
up to 25 ft. 16 AWG
26-40 ft. 14 AWG
41-60 ft. 12 AWG
61-100 ft. 10 AWG
101-150 ft. 8 AWG
151-250 ft. 6 AWG
Yes, ALL your short connects (back of amp to rack speakons and from speaker to cabinet speakons) should use 6 gauge wire as to not have a weak point in case you use long run 6 gauge wiring.
More info on the mid, hi box would've been nice.(Whats in it, who made it etc?)
Good work 💯
I've noticed these sounds always seem to be comprised of passive speakers. I used to own a super powerful system (around 6000 watts) based on an ACTIVE speaker and Sub pairs.
Just wondered why you guys tend not to use an active array of speakers, is it just a based on tradition?
Yes it's Sound System Culture which orginated in Jamaica...you can check CZcams and you can see other videos on it...other countries have now participated over the course of time US, UK, PHILIPPINES, INDIA, JAPAN, ETC
LOVE IT!!!
Thanks 🙌🏾
system maaaaaaaaaaaaaad my lawd! geeeeeeeeeeeeeeeeezzzzzzzzzzzzzzzzzzzzzzzz
🔊🔊🔊💥💥💥💥✅️✅️✅️
Much respect but I have a question regarding your power destroy draw on the input side are you running 120 or is it 240 input ? Most dance halls have 20 amp walls right and are you running off their wall sockets or you running into their power panel at 240 Washer and dryer current ?
240..
@@AcidSoundSystem cool 😎 ,I have another question 🤔 1st thanks for the response I appreciate it Hey the speaker cables do you make them yourself or did you purchase them from a company the 4 or 6 conduit cable how do you have that for your speaker box ? Thanks again friend. 😎