How to Fit Concealed / Recessed Shower Mixer Valve & Taps | How to Build a Shepherds Hut EP12
Vložit
- čas přidán 5. 09. 2024
- How to Fit Concealed / Recessed Shower Mixer & Taps | How to Build a Shepherds Hut - Update Number 12
Tools and Products: Brushed Gold Shower: UK Link ebay.us/Ntsimq USA Link amzn.to/3B0keku
Brushed Gold Tap: UK Link amzn.to/3AWnSeV USA Link amzn.to/3GpTVoP
Fernox Jointing Compound: UK Link amzn.to/3goX1Pc USA Link amzn.to/3siPDKM
15mm Male Coupler: UK Link amzn.to/3rnwGre USA Link
End Plate Elbow: UK Link amzn.to/3sfmqAt USA Link amzn.to/3rqocQc
PTFE Tape: UK Link amzn.to/3sejbsX USA Link amzn.to/3AUGuMm
Thank you so much for watching and please do consider subscribing to see the full timelapse video of the entire shepherds hut build, which will be uploaded very soon, as its nearly complete :]
Best regards, Matt
Your so right when you said often you know what you need but not what they call it 🤣 ive had so many times when i know for sure that someone has made and sells what i need but the name is very much not obvious 🤣
Great video, some great tips thanks!
That's really helpful, thank you. And set at the right pace. Nice one.
Hi Matt, thank you for all the effort you are putting into making these videos… both inspiring and very easy to watch! I am building a ‘space of mind’ cabin and am struggling to find a quality, heavy duty metal chassis… would you mind sharing details of where you got yours from? Thank you.
Hi Matt, came across your videos a few weeks ago and found them very useful, have you taken down the rest of the sheperds hut build vidoes? As this is the only one i can find.
Great video buddy. You deserve more subs and views. I've helped you along with a like and comment.
Hey Marcus, amazing thank you :)
Hi Matt, this is great. Where can we find the finished product? Is it listed on Air BnB?
Hi Matt, Do you mind telling me where you got your chassis from? Thanks
are you a contractor or a handyman? Just curious where you got all your knowledge. I'm a handyman by trade and very impressed with your videos. Thanks
Hey I’m.neither. I like doing my own projects. I have watched a lot of CZcams videos and just got experience from trying a lot of different projects and tasks :)
Hi Matt, loving the videos. I'm building a shepherds hut too. and I'm at the stage where I'm putting the waste plumbing pipes in, it's a bit of a minefield, I was wondering how you did yours? I'm looking at running a 110mm drain pipe along the length of the hut and then having the shower, sink and toilet go into that. The problem I'm having is where to add a vent (or if I need one) I'm worried about the pipes having suction/air problems without one, after researching this I found that vents, like houses need to be high up, which I don't want. All the pipes will run under the hut, so I'm struggling to know where to put a vent and if it can be horizontal under the hut. Any advice you have would be much appreciated. Thanks
Hey Jonny, you can put a 110mm soil stack and vent on the outside of the hut adjacent to where the toilet flushes, so that when someone flushes air follows behind. The soil stack doesn’t have to go all the way up to the roof, you can cut it short, approximately 600mm in height vertically above the connection to the toilet and place a cap on top like this amzn.to/3riUL1W then the rest of your other pipes for the shower, basin etc can connect to the 110mm soil stack pipe on its way towards the ground and wherever you will be draining the sewage to. :) I definitely wouldn’t do a horizontal vent. I hope that helps. Best regards, Matt
@@MattHutton Awesome that's what I'll do. Thanks Matt
@@JonnyKerry great 😊
how difficult it is to install central heating for beginners
Hey thanks for your question. If you’re doing something simple it’s not too hard as a bit of a knack and skill to soldering so if you do a few practice runs first you should be all good. Check out my video on how to install central heating to see for yourself: czcams.com/video/MsF8zAwFw28/video.html
Are you having a gas boiler fitted or is it electric or oil?
@@MattHutton thanks
@@dejanmyrtaj1997 hey, no worries 😉
Hey man what would you do if shower mixer leaks water between brass connectors I’ve tried PTFT tape, redone it multiple times 3-5 times still no results do you recommend thread seal with tape ?
Add dope over the teflon tape (wrap it at least 6 times).
I really like your DIY videos, very informative and inspiring. When will we see your channel on Odysee aka LBRY ...? :)
Hi Julius, thank you :) I did have a look at Odysee a while ago. There weren’t too many users at the time, but thanks for the recommendation. I might start spotting my videos over there too as well as CZcams :)
@@MattHutton It would be really cool to see your content on Odysee as well! :)
I believe they allow you to just sync your whole channel when signing up without any extra input from you. Thanks again for your awesome DIY videos. I'm buying a house shortly and will need to re-watch many of them again :)
@@Dzinglazz Ahh amazing :) and thank you I’ll give it a go!