Get The Perfect Fillet Weld Size Every Time!
Vložit
- čas přidán 7. 08. 2024
- In this week's video, Austin goes over how to get the perfect fillet weld size and how to properly measure them using fillet weld gauges to help answer a question from a member over in the weld app. He goes in depth on welding symbols that tell you where to place your welds along with the sizing and spacing, talking about some tolerances when you go to use your gauges, and see the range of sizes that you might encounter in the field. If you have a question that you would like to have answered drop it over in the weld app and you might just see it in a future video.
🌟 Looking to enhance your welding skills? Check out more of our Channel! We're your ultimate welding resource, catering to beginners and seasoned pros alike.
💡 If you're curious about welding, our channel is your go-to destination for diving into the art and science of welding. Whether you're just starting out or looking to refine your techniques, we've got you covered.
🛠 Discover a wealth of engaging content that covers everything from essential welding techniques to expert tips and clever tricks. Explore welding projects that spark creativity and learn about the best welding machines and equipment in the industry.
👨🏻🔧 Master the art of welding with in-depth tutorials for various metals, including aluminum, stainless steel, and cast iron. Gain insights into welding schools and training programs, and stay up-to-date with the latest industry trends and news.
🎥 Meet influential figures in the welding community and get a look at behind the scenes welding compeitions and events.
💥 At Weld.com, precision meets passion, and our expert hosts guide you through MIG, TIG, Stick, and Flux Core welding methods, giving you the confidence to tackle any welding project.
📲 But that's not all! Elevate your welding experience with our dynamic mobile app, the WELD app. Engage in interactive discussions, access exclusive content, and receive personalized advice. Download the app at: linktr.ee/welddotcom and open the door to welding mastery.
💬 The WELD™ app is more than just a resource hub - it's a community of passionate welders just like you. Connect with fellow welders and experienced advisors, get your questions answered, and find inspiration to keep pushing yourself forward.
📚The app also provides a range of educational resources, including tutorials, tips, and how-to videos, to help you improve your welding skills and knowledge. And with the convenience of being able to access all this content right from your mobile device, you can learn and improve your skills anywhere, anytime.
🎙 Join us for insightful podcasts and follow us on social media to stay in the loop on the latest trends and techniques in the welding world.
linktr.ee/WeldDotCom
🧰 Web: weld.com
📣 Instagram: / welddotcom
📲 beta.weld.com/
🎥 TikTok: / welddotcom
00:00 Introduction
00:49 Joint Configurations
01:19 Weld Symbol
03:47 Electrode & Wire Size
04:53 Setting Up For Stick Welding
06:38 Various Sized Stick Electrodes
08:06 Setting Up For Mig Welding
11:14 Stitch Welding
14:35 Fillet Weld Gauges
15:56 Measuring Weld Sizes
17:35 3/32 7018 Size
18:28 1/8 7018 Size
19:31 3/32 6010 Size
20:08 Mig Weld Size
21:39 Getting To A 1" Fillet Weld
You're an excellent instructor. Clear and concise without being dull
Means more than you know! ❤
ty
The one point you left out that I think you should have mentioned regarding fillet weld sizes.
You mentioned that the fillet should be at least thick as the thinnest material.
What also is good to know is that if the joint is welded from both sides, then the size of the fillet weld only needs to be half the thickness of the thinnest material. Providing it’s welded from both sides.
For example, you’re welding a T-joint with 1/2” material. The fillet weld only needs to be 1/4” on both sides. Both together equaling the 1/2” plate thickness.
I just happened upon your channel. It’s good to see good advice being handed to those looking to learn.
A resource like this would have been great when I was attending trade school or during my apprenticeship.
Nice job
Where’d you get that information. I’ve heard that if you can’t get to both sides, you double T when determining the formula. Obviously depends on codes and material.
This video taught me more than 10 different videos, great job!
You said Pitch-Length at the beginning 😂had me confused for a few moments.Thank you sir for videos they are doing great things for our industry. Keep them coming.
Haha yeah mixed em up at first. Good catch 😂
Those are some satisfying fillets man. I've ran a lot of fillets in all three positions - lots of .035 er70s6 with a CO2 bottle for short circuit and an Ar/CO2/OX mix for spray transfer. Easily my favorite type of weld to perform. I have had to use my 1" fillet gauge once. It was on 1" thick material that was also specified full penetration for the stiffening plate that I was welding into the chunkiest S beam that I have seen in my life. This was doubled ~10" below with another full pen 1" thick stiffening plate There were two additional stiffeners as well that formed a longitudinally divided box, 1/2" plate. These received the smallest fillets at 1/2" This was all mirrored on the other side.
To this day I have no idea what that column supported. It weighed close to three tons, was maybe 12' long.
I guess what I'm rambling towards is that you might actually end up using that 1" gauge someday!
Should have mentioned, that machine has got the guts to spray if you give it the right gas! Not as much spatter as I would have thought. Was that 75CO2/25Ar?
Great video!
😂🤔🤥🤥🤥
Haha that’s some heavy welding for sure! I’ve made some big ones on some vessels. And yeah that was just 75/25
@@austinhargett5792
Thought so, probably why the globular transfer at the end had less spatter than I expected. This is an interesting result to me. I'll have to look over which positions and situations globular transfer is pre-certified for. If it is similar to spray transfer the addition of argon to control spatter might push electrode efficiency up enough to offset the cost of the argon.
Time to get out the AWS manuals.
Thanks again for the video, observations, and idea.
I use the 1” fillet gauge pretty regularly. Welding 2” steel together.
Thanks for some useful information on the weld cymbals. As for the 4 inch pitch, surely it’s easier to mark 0,4,8 etc and mark 2 inches ahead of each position as you go. I’m in the UK and use metric, I do lots of stitch welding every 100mm, miss 100mm. It’s so easy to put down marks every 100mm (4inches) with a metric tape measure down a 5 metre (16 foot) beam for example.🇬🇧
Edit, I’ve programmed my brain to remember, when the weld symbol is on top, it means over the top of the steel. As in the other side!
Thanks for sharing that’s helpful!
Thank you so much for all these insights!
You betcha!
This is a timeless classic.... entertaining and well presented...!!
Pls do a video showing the weld techniques used to achieve these jaw dropping examples... tnx
Thank you! We will have to put it in on the list!
Awesome!
Useful information
🤜🏼🤛🏼
Great content! Keep it coming
Thank you! Will do!
Thanks very much. Even though I dont understand your inch measurements (you guys really should join the metric system…) the explenations of the weld symbols was very useful.
Thank you, maybe we will have to do a series in metric.
Great video. Where did you get shop chair at start of video? What is it and who makes it?
Home made! Should I make a video on the pieces? Pretty simple build
I kinda want just a little bit of Bob Ross on each video now. Just a little.
😂😂 10-4
Would be nice
👍👍
🔥👨🏾🏭🤙🏾
😁😁❤
7/32