Restoration Viking Axe Battle Old | Restore AXE construction Antique
Vložit
- čas přidán 26. 08. 2024
- Restoration Viking Axe Battle Old | Restore AXE construction Antique
Awsome restorations Restoration the axe old | Restore metal castings Antique construction tools restoration
Welcome to the next restoration. I was sent by a fan to me an ax. They were in a state of deterioration, deformed due to heat. own right after that
Thank you for watching the video, wish you a good day. Don't forget to like, comment on, share videos
For details about the channel: / @restorationandmetal View_as = subscriber
#VikingAxe#BattleAxe#AXE
“Wow this guys doing great” gets the black spray paint out..... NOOOOOOOOOOOOOOOO!
Exactly. Then you add in that the patch was significantly more obvious with the paint (like he basically could have just sharpied a bright red circle on the damned thing) and it completely killed it.
@STEVEN JAMES Why the hell do you need to paint a blade
@@TheUltimateBakerofPotatoes9294 it’s so it looks better
Bruh by painting the blade it just made it look more modern and cheap not restored
@@patos1239 that’s not the problem the problem is that it’s damaged not rusted
I really liked it till you stopped restoring it and just painted it.
No need to do more than removing the rust and painting with anti-rust paint, depending on the purpose. All shiny or partially shiny were certainly options of the customer.
I kind of get why because the sanding from the plate replacement looks tacky, but If you really want to get technical you could use a variable speed grinder with a low grade scotch bright pad and polished those scratches out. Then you could kind of have the new shiny original look, and of course anti rust it.
Also when you sand with a grinder don't do small little movements. That just makes it dig in more and create more scratches. Go with the contour of the shape your are sanding.
I would've talked the customer into a black oxide instead of that dumb spray paint choice. If I were the craftsman I probably would've told the guy I can't spray paint it but I can apply an actual black oxide and he can ruin it himself if he wants to.
It was so frustrating...
What an awesome restoration of a viking battle ax made from a modern plow disk.
This is a fantasy axe restore for some one who left it in a leaky shed. It isn't that old and it's not viking. Plus it's made from a couple of pieces of sheet metal not forged.
yeah obviously.
yea its just a metal plate that have been cut and welded on a pipe. so many of this videos are so shitty. vikings would never use something like this
If this is Viking Age my 2000 Altima is a Victorian period carriage.
Yeah, way way too heavy for actual use in battle. More of an executioners axe.
@@magnuslord Yeah, but you're forgetting that Vikings were 8 feet tall and 400 lbs.
I wish I could brush my teeth the way this man brushes his metal 😀
Who is stoping you?
@@deathly9734 N O B O D Y
You will loose your teeths😂
Bcoz He don’t have teeth’s I broke them
LoL ,I am sorry Gavboyh it’s just for making people smile 😊
@@Aerofiq p lol,,,,, 7
I was so impressed and interested in what I was watching until the spray paint came out. I was expecting something more. It's like a skilled metalsmith did everything up to that point then his apprentice said "I've got it from here".
I thought the same thing. What’s with the paint? I doubt the Vikings bothered painting their battle axes.
@@grayghost6692 I doubt Vikings had 1/4' plate steel and pipe to make their axes
@@grayghost6692 They didnt weld with electric either. lol
@@grayghost6692 I agree. Also, there are ways to darken steel without paint. I'm pretty disappointed at the turn out. It feels like he did the blade and was like, well... that's a lot of work so far, I'm tired so, let's just spray paint the rest of it to cover up the blemishes.
Also, the smaller blade on the other side is crooked af
I didn't know vikings could arc weld sheet metal to a tube, they were so ahead of their time!
yeah man, not to mention the quality of that metal XD lamo.
Funny to think that if you showed this to a ancient black smith they would call it a work made by a god and form at their mouth in disbelief and admiration.
While we look at it and see noting but a cheep backyard build.
"Its completely round! and so pure! how did he bent this to such shapes"
@@MouseGoat Pretty sure they'd call bullshit even faster. Being people who actually used these weapons and had their lives depend on them as opposed to simply being interested in ancient weapons.
"Your methods intrigue me, but your "blade" is laughable."
@@Servellion Cosidering how costly metal was to make and reform they would probably see a huge waste of hard labour.
Viking axes were usealy worn down axes reshaped to a battle axe. They were the poor people weapon, allways small for effecitive fighting combined with a wooden shield.
Two handed axes are for show, like for a public execution.
@@jeffreygroen9191 Worn down axes reshaped to battle axe? A poor persons' weapon? Where did you get this nonsense from?
This is not a viking ax. ...its a halberd swiss army ax
Can you please also upload a video on how you created the old look on this before the restauration?
Bruh, i was so excited to see the whole thing look new and shiny....... And then spray paint
I agree, if they wanted to spray paint it they could've just done that over the rust...it looked cooler the way it started out now..
JUNGKOOK!?!!???!
@@Josephina._.01 LES GETTIT
الو
SUPER BRO
I just spent 15 minutes watching you half restore an axe and then give up.
He never gave up that’s how the customer wanted it done of course
@Tony Smith I can tell you instead. There's holes in an antique item. Then you don't bloody cut out a big part of it.
The holes is instead filled in carefully and the excess material removed.
And when he send it you see repeated lines from machining. Unforgivable!
masking job was awful
،،t
,,,
+
@Tony Smith of course...this type of comment lmao
There I was thinking to myself.There's no way that's an authentic Viking axe.Then I get to the comments and find i'm not alone. Take anything made of metal let it rust and you can make a video on restoration.
Me: [knows nothing about restoration except has seen 2 or 3 vids]
Guy: *doesnt use vinegar at first*
Me: Oh man this is a risky move
Master or not, vinegar is always the poor's man first choice! :)
Omfg thats so me right now ahaha
Vinegar is ONE of many procedures to remove rust.
Or an etank! As a cast iron restorer I am in shock!!
Your profile pic goes great with this
It's not old at all, very minor surface rust and pitting, looks home made.
What about that hole inna middle
@@ShamsaQT Oxy cutter torch, it looks very fresh as there is no rust whatsoever..
@@_Skim_Beeble yeah
also completely impractical, doesn't resemble any actual historical war axes, is unusable as practical axe for woodcutting or other civilian activities, Only thing that even comes close are executioner's axes. looks like it was made by someone that has only seen hollywood fantasy
@@ShamsaQT slag on one side. Torch work or most likely. Possibly done with a welding rod and high heat.
No Viking Axe !
Orange rust is new rust, see how easily it came off.....ingenuine.
Me 5 minutes in: Okay ... let's see where this goes.
Me 15 minutes in: Don't ever pick up a grinder again.
cool until you spay painted it. i looks like a cheap prop now... :(
He didnt really have a choice once he cut a hole in it.
It was a cheap piece of crap from the beginning xD
yea he totally should of bronzed it
@@markofthemetal I think he could have left it with a hole. Maybe a diamond shaped one.
@@flippensweet3 should test it or not?
You are very skillful, be careful because these machines are very sharp.
Spray painting it makes it look like you just got lazy my man like you didn’t want to clean up the rest of the axe
Zane Rodriguez maybe the ownner needs it back early
The problem is not that its not cleaned, but that it won't last
That's what I said. Might as well painted the whole thing from the beggining after replacing the holes 😭 still gotta give him credit for the effort
@@Straight2daPoint0 that's not how to restore metal..
@Zane Rodriguez when he heated the blade up with the torch and quenched the blade he could've cause the blade to crack on the inside so that's y he spray painted the blade probably... so basically the blade is useless
Why did you fill the hole with Steel ? Just use Ramen noodles
No u
Hahahah bartender yang LMAO😂😂
Lol u ramen noodles LOL BAD JOKE U USE EM SINCE I WANNA WHAT EVER WEAPON U HAVE WHAT HAS A HOLE LIKE THAT HE CAN DO WHAT HE WANTS DO WHAT U DO
BTW EVERYTHING MADE SENCE
IM JOHN CENA
I really appreciate the authenticity that the can o' spray paint adds.
lets get this guy to 1 million subscribers
14:19 and that’s how you ruin a 20 hour piece of work.
I Actually got mad when I seen that first spray.
Dude me too... glad to see im not the only one
News flash: Iron when it isn't polished is BLACK. Plus it's a rust prevention layer!
@@nowonmetube he could have just kept polishing the entire thing like he was doing though, i think that would have looked great just my opinion tho
@@Abbott26 doesn't mean it would have looked real like it did back then. Anyway as far as I see it, the client wanted it like that.
how the hell did I en up here I was just watching a dude building underground swim pool
same dude
Same oh shit wtf and before the pool video David laid
Thats how i got here too lol
It’s same on my end? WTF
IT’S A MIRACLE
Same wtf
Ah yes, classic viking axe head, for sure😎👍
good job. great!ここからは英訳分からないので日本語で話しますが古くなったものがまた新しくなる事に最近素晴らしいなと思っています。こう言った技術には無駄が無いので素晴らしいと思います。
You almost had a sub.... Then you brought out the spray paint 😩
Stevey Mac ikr lmaoo
And the cheesy music.
He don't need subs just views lol
Butter Cup I think he'd quite like the subs to be honest 🤔
@@manurangers lol why
That welded patch stands out a mile especially after the spray painting
Not to mention he literally could have just welded the holes filled in and then sanded them as he'd done to the blobs. Would have been LESS weird to do that than go through all the trouble of actually cutting a piece out only to weld a new piece back in, and welding is never as strong.
@@impishrebel5969 yeah definitely this. I thought he was going to open it up and make a small design. literally stencil out the space and grind it down.
@@impishrebel5969 EXACTLY
Clearly an art project and not a weapon. Kudos on your superior welding skills.
Super job …….heat tempering as well ! You are a Craftsman Sir……thanks for sharing .
Abe ….( uk )
Why would you quench that with water but not oil?
and the spray painting just killed me!!
dude, I feel you on this one. The spray paint hurt me...and the water vs the oil. smh...Otherwise, awesome work.
maybe the guy who sent it to him told him he wanted it spray painted black. :/
he knows how to restore...
but poor of taste for artwork...sad
News flash: Iron when it isn't polished is BLACK. Plus it's a rust prevention layer!
Oh and why WOULD he quench it with oil? Smh don't pretend shit if you don't know the use of it. It's forged anyway, quenching it again is useless. It's water to COOL IT DOWN
nowonmetube news flash, that was obviously him quenching it, no on heats up material and immediately cools it for no reason.
The natural patina of the metal looks much better than black paint. Just my opinion. Great work overall.
🤣🤣
anything natural will always be better.... i left my survival knife after restoring it just the way it is... just used some ballistol in the end for protection from rust here on out!
I think everyone liked it better without the paint bust still great work!
not gonna lie...That apron earned my like
"Viking axe"
Who'd the hell believe that this was a viking axe? xD
I mean, that just looks like a metal shop highschool project lol
So just to let you know when you decided to heat treat your blade as you heated up the different sections of the blade you made the points in between each heat treatment weak and unhardened it is better to try to heat treat the whole blade and not sections at a time!
Going through the comments that have been made already, there's a lot to take away in this video. Here are my pros and cons:
PROS:
1. I like it that this was done with a relatively minimal tool set. Some restorations have endless grinding stones, files, rotary tools, and other bits at their disposal; this one's more approachable.
2. I do like the look of the black vs. polished steel.
3. Attention to detail on the edging and polishing is good.
4. I like the attention to detail when straightening the piece, especially with the bowing marks and applying the torch to let the cooling do a lot of the work.
5. The welding of the square patch shows good welding technique.
CONS:
1. The black / shiny contrast could have been achieved with a cold bluing fluid, which would have lasted longer. If you're going to do the paint and call it a restoration, I'd have liked to see some filler in the substantial rust pitting.
2. The edge-hardening exercise seems largely irrelevant, because it looks like the piece is only mild steel and not high-carbon steel. I say this because a) Grinding the object fails the Spark Test, and b) details on how the smaller blade is attached indicates that it was welded and not forged.
3. If you're going to do an edge quench, use oil, not water, and make sure the heat is hot and even before quenching; don't quench in sections.
4. Patching the center of a fairly thick piece like that will create stress fractures in the metal during cooling if you weld in a square.
4a. Instead of replacing the torched-out holes with a metal patch, I'd have cut them out and left the hole, similar to what's done on the small blade.
Idk, while the black looks decent on actual axes, I don't think it looks really good on an axe that was probably used to kill dragons lmao.
you're absolutely correct man... your points are strong... the black paint is not restoration and it looks very cheap on that rare piece... and patching the middle part is also not a very good idea... moreover the contours are also left as it and thus the curves are not that smooth, and the pitts arent removed as well...
All together, the piece doesnot look that Elegant as it should have after the Restoration, as if it lacks the Dedication, the Art and the Attention that it Actually Deserved..
@@juned8772 I don't think it is a "rare piece". I'd be really surprised if it were even 50 years old. I don't know much about these things, but I suspect a real Viking axe head would be forged hardened steel, not welded. Looks like a garage project left out in the elements to me.
@@JesseArt yeah you're right tho
2 things, first the holes in it could've been cut into a decorative hole, which was occasionally historically done on weapons. Second, the dang heat treat. The blade wasn't near hot enough for a good quench it needs to be orange. A slightly bright orange but not much hotter, all that happened was normalization (softening) of the steel. And because the "treat" was done in sections, it makes different parts of the blade different steel grains, making it weaker overall. And holy lord he quenched in WATER. That's how you get cracks and fractures in a blade. Quench in oil, never water.
That's REALLY Interesting! Tell me more! Why use Oil? Wouldn't that inflame the Blade or rather take more time to cool down?
@@jmeister7482 the problem with water is it cools the molecules too fast. And something that's rigid and it gets cooked to quickly, it becomes brittle. As I said, it breaks apart the grain structure of the steel. Oil cools the blade relatively quickly but not too quickly, making it hard with a little bit of flex instead of too hard and very brittle. And yes, the oil does tend to catch fire when you put in a piece of metal that's around 1500 degrees but once you take out the blade, the flame goes out. That just happens. It's not dangerous, especially in an outdoor or well ventilated quench tank
I see, that's good to know
Yeah, what he does is absolute nonsense.
Hurt me a lot to watch this.
@@redneckfishing9357 the Japanese metallurgists suggested "Quenching in a slave" could have been for several reasons. Iron in the blood, at body temperature, or to add the spirit to the blade. The original text is ambiguous.
Axe: *no no stop hitting me with a hammer!*
This guy: *ITS FOR YOUR OWN GOOD*
Wtf 😂
@Lucas1026 LOL
Dads with belts be like:
@@theslaughter1696 lol
We need to straighten you up b
these videos are the best on sleepless nights, watching these videos along with a morning coffee is the best
right now lol
Am I the only one who thinks that it looks like it was shot by an alien plasma rifle?
As a viking I tell you: That is no viking ax!!!! The only thing it is, is fantasy and whisfull thinking. And just let it be at that: your take on a fantasy ax!
Painting it black at the end, to me was like... Vandalism.
I cried
I dabbed in sadness
Hi professional knife maker here, some tips on your hardening.
1.Rather get a container that can fit the entire object you're wanting to harden because you'll get an evenly hardened blade. Also use oil instead of water, helps avoid cracking
2. Can use a torch like you have to heat up the blade but make sure the edge at least is evenly heated and use a magnet to check when it's ready to quench. All steels have varying temperatures they'll harden at but they'll become non magnetic when they're ready so heat up evenly alomg the whole edge until magnetic can't stick to it.
3. Sounds like a myth but is real when you harden point the tip north to avoid warping. This is when it becomes magnetic again amd is effected by earth's magnitism.
Last thing temper your blade at 180 degrees Celsius for most carbon steel for 1 hour 3 times after it cool to room temperature.
I like your I like your style
Ooh I liek
great advice, except the magnetic north bit; it sounds like a myth because it is. The Earth's magnetic field is far too weak to cause warping.
@@sigmundr2148 I thought it was a myth but my boss and I have done tests and it's true. Whenever the quench tank didn't face north all the blades hook northward. When it was pointing noth the blades where straight. Even in vertical quenching if the edge didn't face north it'd hook towards north. So yeah we thought it was a bunch of balcony but it's a genuine thing
@@skulduggeryvile7887 Lmfao, and you believe this is an ancient viking axe. haha
Beautiful work and ignore the haters. They have no idea what the customer asked for and it doesn’t matter if it’s not a Viking ax or not you worked hard on it.
I love this axe its exactly like an executioners axe with the black paint! Looks awsome!
I think this is not old, probably a prop; but your work is very good !
It is not... Just look at the way he "heat treated"... no annealing, quench in 3 parts and into water... Any bladesmith would have suicided watching that
I like how the hole in the blade looks like it was made with a welder or plasma cutter cause if it was eaten away by rust the metal would be way weaker and there would be you know rust around the holes
AMG Benz Scooter 😮💨
Watched this on 2x speed and I still want my 16min, 27 sec back...
Anyone else go. "Um why spray paint black? That's not a restoration" Must of been requested by person who sent it in
Thank you! I was thinking this exact thing. Because we don't know the order, maybe they didn't want it to be sharpened. Just wanted it to look cool.
Yea I was thinking that too
We all asked that question...
Also the cutting off from the middle was not really necessary - lots of other ways to fill that.
Im not satisfied with the results.. but thats an amazing work.
Maybe you can do it better
Unknow woah chill
great job young man!!
Wow, and more. Continue and introduce us to a new and wonderful food 👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻❤❤❤❤❤❤❤❤❤❤❤
He definitely should never of spray paint that looks like shit now
Maybe He likes it.
I agree
i just hope that is not a real antic axe.... What a mess
Bloo Dee doesn’t matter if he likes it, it objectively looks like shit
The black paint makes it look like some stupid child's toy in my opinion
the blade looks amazing but that black paint at the end......just nope
Yeah right it looks awesome maybe your blind go to the doctor asshole
@@kenkanekikakuja4646 It looks like shit at the end.
Drake Dragon no
WoW very nice linda video ❤❤❤
Me 10 minutes in: wow this is looking great!! Can't wait to see it all silver shiny and nice!
Me 5 minutes later: ............but why
*See's little holes*
This doesn't look right...
*Makes a bigger hole*
That looks way better!
Yeah
Tryphobia XD
It does actually
Same thing
I love these restoration things cause its so sadifying and i wana learn how to make and fix wepons
Are you from another country and ca not speak English well or you are a kid (no offense)
@@carmelbunny9343 you cant even spell cant right your english is worse😂
@@mnty9951 its not im from another country and autocorrect ruins my English very much
صل على سيدنا وحبيبنا محمد وعلى آله وصحبه أجمعين وسلم تسليما كثيرا إلى يوم الدين
More spray paint please!!!! Makes everything look so professional and nice! :)
Nobody:
The camera man:
⬆️⬇️➡️⬅️↖️↙️
Lol
No joke that is the BEST apron.
Beautiful !!
Have a hard time believing it was a true viking axe. That rust just came off way to easy. Looked to me like a replica
at the beginning I was like "god damn thats rusty!" and then they brushed it off like cheeto dust
@@eldogius the rust is fake or the whole axe is just badly made
Or the channel just restores for views (hopefully this is true)
Annie Ayotte cuz it was jus surface rust
Great job man restoring a blade that was used or public executions.
@@eldogius How the fuck is the rust "fake", you mong? He's cleaning it with a brush made out of metal wire.
xenangmgavietnam.com/
when he takes the brush and puts on the apron
"It's cleaning time boyz!"
Fantastic! I did not know that the vikings had axes made out of steel🤣🤣🤣
We use acid on rust! What a fun video!
Great video ... Hard work never fail 👍
Still one of my favorite guilty pleasure to watch on CZcams, and by guilty I mean I feel guilty whoever actually sent you this axe and got THAT in return lol.
So basicly it is still rust infested under the paint.
Perfect for eliminating nuisances
That thing will be just fine long after that guy is old and grey
bet its quiet effective against anti-vaxxers though.
Bonus poison damage
@@phillthefattman8671 Very effective for cracking open the skulls of heretics in the name of God.
Весёлый ролик.... 😂.
Сделал, состарил и отреставрировал (когда вырезал заплатку для дырок от старой викингской сварки на заготовке было видно точный изгиб, повторяющий изгиб малого лезвия топора, да и странно метал аккуратно и ровно без каверн, точно как заготовка под за платку) 👍
Now this is still a battle hatchet. It's a viking warlord's battle hatchet. Even though it's not a knight's 2 edged battle hatchet.
i like watching these types of videos when they take the rust off its just satisfying
Dfuller Fulle
yes i just saw this comment
this guy could restore my broken marriage.
You guessed that I think deep within you will do that. Wish you will have miracles...
Ha
You look like Felipe Neto
@@nedu3905 o pior é q parece msm kkkkk
@@lunablossom8231 o cara n deve ter entendido nd Hsuahsuahsuahsh
You have done an amazing job🤩👍
I’m perfectly fine with him painted it cause it looks cool now
Yeah
Oh u play roblox to
@@heskr517 yup
Dude, that black coating looks really bad.
Yes that looked like shit
L888880 4444
Yea I agree
News flash: Iron when it isn't polished is BLACK. Plus it's a rust prevention layer!
nowonmetube That doesn’t mean it doesn’t look bad
WHAT??? WHY DID YOU PAINT THE MASTERPIECE??? 😮😮😮😮😮
I also love the show "How it's made"!👍🏻
That axe is as viking as me Korean 😂😂😂
Me when they're wiping off the axe initially.
"Ooooooo. That's gonna look so pretty when its all silver and shiny"
*reads the comments*
(Whispers) "no"
I know right
الو
haha....same😃
I will never get the black coating. That just makes this axe look like a plastic LARP axe, the origin of this axe goes completely to waste.
Would be better if it was carbon black oil that is seasoned on through repeated heat treating. The heat treat would also help to normalize the blade tension after edge hardening and welding the plate. The whole blade should have been annealed before edge hardening. It is actually very dangerous to use a heavy plate that might shatter on a long moment arm; probability is higher that a large, heavy, and sharp piece comes flying off.
@@brendanwood1540 wow that's interesting, I would like to get into blacksmithing and forge welding, you should make some educational videos on it
Would look good with gold and a turquoise inlay.
It would have to be a prop, because that axe will smash to bits when it is smacked against something as hard as bone. His hardening quench was dumb, the metal is meant to be hot enough to not hold a magnet to it, bright orange, to be then quenched. And then you should also know the carbon make up of that metal to decide on a water or oil quench. Water will make it super hard, but more likely to warp, and also crack the metal. Oil quench is safer for people who obviously do not know what they are doing.
like.... at least make it gradient if you’re gonna do it
nice job
This is my first restoration video that I saw before!
I will never get my time back for watching this. Thanks..
I mean, it was your choice.... And it was only 16 minutes, it's not like he lied
What did you expect I’m honestly curious how you thought this would be anything else
Lolol
Lol was wondering why everyone was mad about the paint until I got to point were he was painting it 😂
I was not convinced at all this was a real Viking ax. Still cool restore of a replica
Everyone is complaining about him spray painting it.....anyone think maybe that's what the dude wanted that sent him the damn thing? Lol
I'm trying to imagine his hands are that quick without anything being sped up. Worlds Fastest Nut.
That is wrong in every possible way but you are correct
It's 1:00 AM and I'm still up watching antique restauration videos...
What the hell brain?!
5 am here lol
Lol
@@archangelmichvel2701 03.07 KDNFLJSNGLNSAFDN
Did we ask yow👎😂
@@annahmarielofranco3070 what ıs ur problm
Im a descendant of Vikings....when the spray paint cam out and you just started to paint it, it was very disappointing and hurtful you didn't try to keep restoring it.
When he sprayed it i immediately said dammit out loud...
After 4 years i am back again . . . . wow
Absolutely terrible quench, and it absolutely killed me when you spray painted it
Exactly my thoughts i saw that quench and almost cried i would never trust that thing swinging it at anything with hardness to it.
in my opinion this axe (helebarde) isn't antique...its a pipe with weld attached cheapest sheetmetal blades....Not worth this much work...but you are a very handy guy! And i like that kind of videos..nice work!
This isn't a helebarde at all, the metal part of the helebarde it's usually 1 big piece, with both blades on each side, and a pike on the top.
your right its not
Halberd?
Супер, браво👍❤️🔥🔥🔥
If this axe is an old viking war axe, then I'm the wizard of oz.
عربي مر من هنا...✋🏾
نعم مر من هنا
ههههه
انا