Making Extra Large Concrete Pavers ( DIY concrete patio )
Vložit
- čas přidán 18. 06. 2022
- In this video, I will show how I created large concrete pavers for a patio area. Although it is a lot of work, doing it yourself is cheaper than hiring a pro.
Check out my WOODWORKING PLANS gumroad.com/diycreators
Materials List (Affiliate links)
- 2''x4''x12' Lumber - homedepot.sjv.io/n1NvgV
- (40) 80lb bags of concrete mix homedepot.sjv.io/ZdXzqK
- (18) Leveling sand in bags - homedepot.sjv.io/yRyvWN
- Screws amzn.to/3QAxzXR
Tools (Affiliate links)
- Concrete Mixer - amzn.to/3HBKKUj
- Concrete placer amzn.to/3O8NqLC
- Concrete bull float - amzn.to/3aZKzGb
- Concrete trowel - amzn.to/3aZKzGb
- Wheelbarrow
- Speed square amzn.to/3N3YXuu
- Circular saw - amzn.to/3bdumgD
- Mini Palm Nailer - amzn.to/3HArjey
- Hammer
******Quick Overview of the concrete slabs ******
Step 1. Pick a spot and flatten the soil.
Step 2. Cut 2x4 and build the frames.
Step 3. Cut stakes and drive them into the ground next to the concrete forms.
Step 4. Mix the concrete mix and pour the concrete mixture into the forms.
Step 5. Screed the top and trowel it after
Step 6. Pour the 6 slabs outside and pull off the forms after, leaving the middle.
Step 7. Pour the three middle slabs.
Step 8. Finally, remove the rest of the forms.
********* Support my work ********
• Timberland pro work gear - bit.ly/TimberlandPRO_DIYCreators
• Help me make more Video: / diycreators
• Instagram: / morediycreators
• / diycreators
• All my woodworking plans gumroad.com/diycreators
#concrete #concreteslab #patio - Jak na to + styl
Part 2 Video is here:: czcams.com/video/FuS3A5f8DeI/video.html
Part 3 Video is here czcams.com/video/wBBlE80TUO4/video.html
*I see the question about the reinforcement popping up. I didn't add rebar because I do not think it's needed. While you can undoubtedly add reinforcement, walking on these will not break them.
You've never seen my inlaws!!!
_Badumtssst_
@@carterscustomrods ouch 🤣😂
Oh, just saw this....ignore my comment below then. Why do you think reinforcement is not needed? Are you a concrete guy, landscaper, or have you worked with or know a concrete guys. I have worked in construction for 25yrs...not saying I know everything, but I do know that if you were to use wire mesh it would highly reduce the cracks you will get over time. Just saying for a few extra $$$ it would have saved you a lot of frustration.
When you said you moved 14,400 pounds of material, does that include wood and other things? Because the 80 lb bags of concrete would mean you bought 180 bags and it seems you didn't use that many.
@@illestofdemall13 Hi Kris. He said in the description that he used 40 bags @ 80lbs and in the video, moved them 4 times (to the cart, to the truck, to the garage, finally to the backyard) therefore that's 12800 lbs. My guess is he bought 45 bags but only used 40.
after 50+ years in the building and construction trades and watching 100’s of DIY landscaping idea videos, I gotta say I am impressed by both your creativity and your get it done attitude. keep on working and bringing the videos your work is awesome.
I'm impressed; he's got a lot of "gitter done", in him
I can really appreciate the fact that you do most every project in a way that can be copied by the average weekend warrior!! Thank you!!!
Thank you, it takes me a long time because I do consider a way that would make it easy to follow along.
Including the "Instructions? Who needs instructions?" part.
I was thinking the same exact thing!!! I appreciate this!
Agreed! Thanks!
My
I have poured 10’s of thousands of yards of concrete in my lifetime. You did an excellent job especially if this was your first time pouring, forming, and finishing concrete. Working with concrete that you are mixing yourself is much more difficult than working with a ready-mix. Measuring the water for each batch is paramount for consistency. Don’t eyeball how much water you think you need. Then, not having all the available tools that make it easier, obviously just adds to the degree of difficulty.
As to all the comments on reinforcement: These are close to the size of sidewalks, and I’ve NEVER seen or personally reinforced sidewalks. And if I was going to, it would be with wire mesh. But the other side of the coin is that sidewalks are typically 3 to 4 inches thick. Fiber mesh would be an excellent option. I must commend you on compacting the ground under the concrete. It’s vital for strength and if I had to choose between reinforcement and ground compaction, I’d chose compaction.
Edging and spraying the forms with vegetable oil would make a world of difference in how easily the forms could be removed and how smooth the outside edges would end up. A light broom finish after your last troweling would serve to conceal imperfections in your troweling while providing a nonskid surface.
Again, I think you did a great job and , but I think, at the very least, I would have gone with 3.5 inches thick. One vital note is not to opt for a quick setting concrete mix, especially if you are a novice. You need time.
Really constructive, and helpful reply, Thanks David!
Some nice little tips in there bro, thanks for ur input too..
I must commend you on compacting the ground under the concrete??? How about actually putting a base down? Who pours directly on top of the earth???
Thanks for your professional tips!
@@josephland34 I don’t know that much about pouring concrete , that is why I’m watching but I think that he put down sand (as the base ) before the concrete on top of the earth . They are squares not really large so I think the sand was probably enough without using the wire mesh etc like you would a driveway ,a larger area . Maybe I’m wrong but maybe I’m right , who knows . Maybe someone else could answer your question ,I really would like to know honestly if what he did with just using the sand would be just fine to hold up long term .
Okay, I'm not going to lie, that looks like a lot of work. This is obviously a project for someone as fit as you, because carrying all that cement would have done me in! LOL! You're amazing. Thank you for the video, much appreciated. Great job!!!
You'll become super fit just doing this project lol
Your thought process for form removal was very well thought out. I'm a professional builder and I've watched lots of guys doing form work get that part wrong over and over
Thanks, I appreciate the kind words. This can be challenging if you don't think it out.
This is true, I'm a form worker. Anyone can build a box but not everyone can already think of the stripping process while building it.
Actually it was terrible.... Should have packed the earth first then laid out the forms with pegs between the forms not inside....
@@thenarrator1984 he intentionally did not do this so as to save on concrete. He didn't want full 1.5" thickness.
@@DigitalOSH- lol no.
Could have controlled height after easily. The main factor is the ground should be packed prior.
Nice job and great finish. I also like to add alittle “broom finish” to the surface while concrete cures and it leaves a tiny grip surface to prevent too slick a walking surface- this is a typical application with sidewalks and patios - lightly brushing with a broom in one direction to create the texture. Blessings and keep up the great work
Great job dad! It's obvious you're no stranger to hard work and have the perfect work ethic and attitude to get any project done. Can't wait to see your project completed. Again, awesome job man.
Your attention to detail is commendable! Love how you plan, organize, and finally get the work done. Beautiful design and use of the space!
Dudes finishing is boss
Hey Glen
Here's a tip for you and the army of subscribers you have . When you use wood for shuttering ( framing) for concreting it's wise to paint the timber on the contact surface with used engine oil , oil and water don't mix so the timer comes away from the concrete much easier . Diesel fuel is ok to use too but used engine oil is a by product so its free unlike Diesel fuel which is expensive at the moment . Keep up the good work 👏 👍 Bill in UK
🦾
Hey, thanks for the tip I will save this for the future.
Doesn't it 'ruin' the timber? I would suggest a roll of 'skirting' (black plastic, flexible foil) to keep the lumber clean.
@@ibubezi7685 Technically it does ruin the lumber, however, BIll's suggestion is based on using the lumber over and over as formwork. Your tip is excellent if they want to use the lumber elsewhere.
@@ibubezi7685 no it dont ruin the lumber yes it will have oil on it for many years you are not trying to keep it clean you are making sure the cement dont stick to the form and break upon removal . also here once poured we have to spray the concrete with diesel so it inhibits it from drying out too fast and cracking . as for the wood you can go on and use it for many projects and it will last for years exposed to the elements . FYI motor oil works better than fancy stains for sealing wood
I love when I see ppl doing their own work and not hiring it out. Yes it’s hard work. But the money you’re saved and the pure satisfaction of seeing a job well done. Is just amazing! Good Job 👏🏾
You know sometimes it's not a money issue, it could be an accomplishment issue. Just doing it yourself puts you in a good state of mind
@@thompsonappliance3078 I'm the same way. how I feel is a big part of it. But knowing how contractor take advantage of ppl and me knowing I can to the same job myself. What a relief. That too is a form of accomplishment.
When I was younger, I did a lot of handyman jobs around my place. But those days are pretty well gone now. I'm in my 70's, have a lot of physical challenges, which means I can't do the stuff I did when I was in my teen's or later. Getting injured never helps either. Do what you can when you can, so you don't need to hire it done because you can no longer do it.
I'm just going to echo all the comments already made. Love the video. Always thinking 3,4,5 steps ahead. Hats off to you my man 👏
Bless you sir, you remind me of my husband. He just completed a landscape wall and planting project. He hauled a lot of concrete, sand, rock, soil and plants. Hope you get a lot of enjoyment out of that patio. You've certainly earned it.
You definitely know your tools and labor intensive projects. You make everything look so easy and affordable for a DIY person like myself!! Looks great!! Thank you for sharing your knowledge.
One of the best tutorials on diy stuff I've ever seen. Thank you for being so informative and use of fast forward. Seeing how to do it and all the components that went into and complete it was absolutely awesome. So again, thank you.
Good 👍 job I would make the joint smaller so weeds would not grow up
Love that you had your little girl out there working with you!
The best part of this video is your daughter helping you. Love that!!!
Thank you for sharing. Your work is always fascinating. Keep it up!!
Thank you! Will do!
Great Job! I’ve watched a couple of times and decided to use your measurements when I attempt my slabs. I love the layout.
I love how you made it so easy to understand for those of us who are novelists at best. Thanks so much. Job well done it looks great !
I LOVE your helper..
So sweet when parents let their kids get in on the action..
Glen for future projects a mason taught me a good trick if you're doing a lot of mixes is to get a small bucket (that goes inside a massive bucket). Instead of trying to read the water level or having a measuring cup exactly the right size, work out how much you need in the bucket then drill holes about half way around the bucket at that size so when you dunk the bucket and pull it out it drains quickly and you have the perfect amount without looking. Another way (when I'm doing a lot of self leveling work) is to prefill 20 buckets with the correct amount of water so the apprentice can keep the batches flowing nicely just try and either cover them or keep them in the shade if you're using sensitive products that require precise amounts.
Much better idea than stealing the wifes pyrex
@@callmedragon5321 DITTO!!
Prefill 20 buckets? Well, there's another $100 added onto the cost for buckets
With all the building going on literally everywhere, you can usually find countless 5-gallon empty paint buckets on large job sites for free- I certainly have. Just a thought-
20 buckets...nobody does that ffs
Looks great. Having poured 12 footings for both my back porch and a garden fence - in Minnesota, where they have to be pretty deep to beat the frost heave - I feel your pain in carrying many, many bags in many, many legs of a journey. It's always worth it to see your work and know it's fairly permanent too. Kudos!
Owner and operator landscape construction company. Every project shows when completed with vision and enthusiasm. You are a man we would enjoy tackling projects with. Hard work pays off. Getting the kiddos involved is gr8 too! Nice work
Nicely done. I'm hand mixing concrete walks around my house. One suggestion I would make is to cut the stakes flush to the top of the form after they're screwed in. It makes screening a lot easier.
it also makes SCREEDING a lot easier.
Looks great, its always good to have a little helper with you! I look forward to seeing the finished space.
What a great little helper you have. ❤ I always loved helping my Dad with his projects too.
After contemplating what to do in my yard, Your video has reconfirmed what I want to do. I will do it with my own design but using your genius idea. I was going back and forth on maybe doing a deck like you did to just hiring a contractor and have him do pavers. But like I said earlier, Your video has made up my mind. Thank You.
I love how you make beautiful and amazing things but using basic supplies that are relatively easy to obtain. And in cases where you have a specialized tool, you explain what to do if we don’t have that. Thanks!!
Your videos are always on the top of my list to search when tackling a home DIY project, great stuff!
So cute to see your daughter out there helping you. smile
Great job. I feel like I could do a small concrete project after watching this video. You do awesome work.
Such great content, inovative, great naration and easy down to earth explanation. I feel empowered!
Looks awesome so far! Can't wait to see what you do with the space.
Thanks Jill! Stay tuned.
A lot of times when I watch CZcams videos, I think that looks easy I could do that. Not so, when I watch you. You are one of the hardest working young man I have ever seen and as an old woman (that I am), I could probably move ONE of those bags of concrete from the store to my car….THEN, I’d be DONE! One thing that always impresses me when I watch you work and see your finished jobs is the prep work that you put into a job that nobody sees from the outside looking in. The fly by nights who did my driveway and sidewalk put up forms and may have used a little rebar, but never sand or gravel. It was poured approximately 7 to 10 days before cracks started forming across the driveway. I know time is money, but homeowners would rather pay to have it done right and with the care that’s obvious in YOUR work than a shoddy job they’ll have to deal with for YEARS! Thanks for being a craftsman and artist in your work!😊
I like that you had a helper for part of the project so your next generation can do DIYs too.
If I only knew someone with your level of skill and integrity. I am so happy this video popped up. I hadn’t seen your work in so long. Your family must be extremely proud! Another diy project well done! 👍🏽
Well thought out start to finish. Thank you for providing all the details while keeping all the discussions and steps concise. ⭐️👍
Awesome you have your child out there helping. 🙏🏼
Those rainny days did you such a big favor! -You have to cure concrete after you pour. Keeping concrete wet for just 7 days after pour, increases the strength of those slabs by around 400%!!
Which equals = much less cracking + they'll support much more weight.
Great work though! Looks fantastic.
Happy Father's Day Glenn I hope you enjoy yourself today God bless
Thank you Christine!!! :)
Very well explained. Excellent job!! Thank you for your detailed project. Much appreciated!!! 😊
I have been wanting to do this exact thing in my backyard! Thank you for providing this DIY video as it's much appreciated!
The best men bring on the greatest helpers. You did a great job and brought in the best helper. Well done man.
good idea, i have done it myself. I personally used small mesh and vibrated each slab. I also added a base to my mould so the good side is face down and comes out perfect after vibration. No need to finish the bottom (top) that way
Thank you, I appreciate the tip!
Your hard work ethic is commendable and inspiring! I love the grid you created with these large slabs. Not sure what you are going to use this space for, but adding some grass in the gaps would look real nice!!
Great work, Never be in a rush to do a project. You were not and took your time. It is beautiful. I am a DIY fan have love to take on projects out of my comfort zone, to watch and learn from others. Thank you for taking your time and sharing. K.
As a beginner, a your new subscriber, I appreciate the love, care, creativity, and enthusiasm you put into your work. Thank you for explaining step by step what you're doing; it mbv makes it easier for me to understand. Blessings to you and your family for Christmas and the New Year ahead! 🙏🙏🙏❤❤❤💐
Exterior form release idea: Use pocket hole screws in the cross members so you can screw into the center of the form. Ideally one would use two pocket screws at each end. The first, a rather short screw to connect with the top of the center board, and the second very long so you can connect it to the bottom of the center board.
Nice video.
Good job man. Great idea, production, helpful tips, and everything!
I like the clever way you used the framing lumber to set up the forms. The end result looks great!
I always read comments and see the advice to improve awesome to hear professionals call it. and actually help and not just criticize.
I always preferred putting dry concrete down, and then moistening it with a sprayer. Then chicken wire on top, then after about 2 hours, I do another layer of dry, that I spray soak. 20 years later, my pad is still perfect and uncracked...
Even with the extreme Florida weather.
Would be interesting to see that done if you have a video, thanks.
Pouring concrete dry and wetting then troweling it is the WORST way to put down concrete. Your good results are the exception not the rule. I've seen the short and long term results of this and properly poured concrete, there is no comparison.
I know that was a lot of work... I definitely want to see what you do with this space.
Thank you! it was, but I paced it so it was not too bad.
Thank you for posting this. YOU are a really hard worker!! Good job! Lots of great info for us novices out here. May God bless you in your future projects 🙏
I love how you cut your lumber on the styrofoam to keep the blade from hitting the table and not having to cut without support. That's a great idea and I'm going use it!
This looks fantastic! I can't wait to see how it comes out. I want to do something similar in my back yard
0
Fantastic work, Glen! It's looking great there already! 😃
Looking forward to part 2!
Stay safe there with your family! 🖖😊
Thanks bud!
Exceptional job! I can't wait to see the final project! Very inspirational!
Tenía mucho de no ver tus videos!! Gran agrado de encontrarte de nuevo!! Y me encantaban tanto por lo bueno que eres haciendo tu trabajo y porque estaban traducidos a español!!! Me encantaría encontrarlos de nuevo en español!! Felicidades!!
Great project, Glenn! I always appreciate the thoughtful planning that goes into each of your projects, accessible to most folks' skill levels, and they all turn out fantastic, appearing to be much more expensive than what they actually cost. I'd be proud to have this patio area tucked away in my own backyard. Sooo.... When will you be coming by to build mine? :)
You're a good man for sharing your knowledge. Thanks.
I appreciate that!
I used the same concept for building my paver style walkway. Wished I had watched your video first. Great job looking forward to your next video. Job well done 👍👍
I've been a fan for eight years, Man. Again, I'm amazed and great job professor. 😊
Nice project - good advice for duplicating for my future project ✅
Oh cant wait to see the area progress
I love concrete. I am not a professional concrete person, but I can tell you did a beautiful project. It is motivating and inspiring. I want to do the same thing too. Thank you.
Keep the stakes below the top of the forms so they don't interfere with the screed
Concrete is strong as it's weakest point. Get the base perfectly flat.
You definitely don't use a bull float on 4x4 pads. Use an edger to put a 1/4" round on the edges of the pad when the concrete is wet
Thanks
This project is definitely labor intensive, but a lot cheaper than hiring someone else to do it. I have paid thousands to have concrete laid. It looks amazing already! Can't wait to see the completed project! 👍
I liked your entire presentation. Everything… from your design, the formwork etc. -how you thought through the process. And you come across well on screen. I am looking forward to watching the finished project!
Having his daughter help was a genius touch.
I just love all of your projects Glenn. I can't wait to see the next step.
Good work young man. Your powers of construction are impressive.
😁
You may want to wear a face mask in future when mixing your own cement. Cement dust is not good for the lungs.
👍
Thanks my friend, you are correct I should be wearing a face mask. I did put one on later in the video.
Nice work!! I do a lot diy projects also have the same mixer could of just dumped the cement right to the forms from the mixer would saved your back
Wow I’m impressed. First time I see a rookie mix concrete the right way. Which is adding the water first. Good job!!
Next time just wet your finishing trowel a bit. Makes it nice and smooth.
Hard labor but economical with great results. Bravo!
Well done, maybe use an agent on the wood forms to prevent wood from sticking ( plain old vegetable oil ). That being said, It looks like you were able to remove them with minimal force. Nice job.
Looks great. Only thing I would have done differently is a light broom finish to get some texture so it's not too slippery when wet. You could do alternating vertical & horizontal broom marks on each slab to get a cool modern look. But the smooth finish is nice too.
I have never been so tired watching somebody ELSE work. I needed a nap watching this video more than the 20-minute weight training I ACTUALLY did. Whew. Now I'm invested. Gonna watch the other two videos and see what in the world you are making.
That bit about clamping the 2x4's until they can be used is genius!
That’s a lot of hard work but your diligence and determination got it done beautifully! ❤
Question: I really like this look but have been hesitant to do it. Have you found that chair legs sink if a leg is on the non cement seam portion making the chair or table wobble? Thanks for the tips. Looks great!!!
I would think he could use a poly sand for the joints that hardens.
This looks great! Would love to see what you do with the space. I’m making over my yard next year so I need inspo
Thank you! I hope this helps. Stay tuned.
Great video- I like that you get to it, not adding extra irrelevant stuff. Thank you!
Wow Im so impressed you did this by yourself! Hats off to you and thank you for the great , clear instructions!
why you don't use rebar?
For slabs this size it's not needed. Here, they pour the entire driveway without rebar. They even pour the house slab without, the only put rebar in the footer. Street sidewalks do not have rebar here either.
@@DIYCreators are they using fiberglass as binder in the concrete?
Your work is excellent. Love it! Like I say- once you go Handy … you don’t want Namby Pamby! People - a handy person is a blessing!
Omg I have so many projects to do!! What a dream!!
I love your videos brother, you are just an amazing teacher. Live your attention to detail, explanations and great skills. Inspiring. God speed.
OMG. LOVE IT YOU GOT YOUR CHILD WORKING WITH YOU. TEACHING THEM. FREAKING AWESOME.
I love your little helper! She's so cute!
I learned two things from you buddy in less than 30 seconds ! One was that you were using a piece of styrofoam as a buffer to cut on and the other was to alignment and clamp your wood so as to keep it from warping till you use it !!!
Very nice. I've been trying to figure out how to put in a patio in for our new house by myself as cheaply as possible. This helps a lot! Thanks
As usual
This was another good video with a clear explanation.
I like that you "speed" up the repetitive parts to show the detail but not drag it out to a 6-hour video (or however, long the project)
Very impressive and informative! For a DIY'r, it's even more impressive. I'm one myself but haven't done anything this large. Thanks for the videos.
Thank you for that brilliant idea about doing the squares all-in-one big piece that is a sheer stroke of genius. 👍👍👍
Appreciate the authenticity of truely DIY instructional video using tools that we all can afford and use. Unlike most “DIYer” on CZcams they got all the expensive tool and 20 cars garage to store all their tools😆
I'm so proud of You, Keep giving us these wonderful videos !
Hey! Finding you more on my “recommendations” listing. So happy to see a “brother” doing quality DIY. And yes, screws, not nails best for your 2x4 connections… allows for minimal expansion and “snugs up” the woods.
Anyhoo… Enjoying your DIY Home Improv Choices for Channeling here! Wahoo and all the best for you!
Great video. I had drawn out similar plans for a parking space in the front of our house, but wasn't sure how I was going to make the forms. Your video gave me some great ideas.
Because of you bro I did a really nice concrete pathway from the sidewalk to my house!
finally we have a very simple straight forward video for concrete slap ,,, thank you so much for sharing