Removable Fruit Tumbler Toppers
Vložit
- čas přidán 19. 05. 2021
- Removable Fruit & Ice Toppers
Attached with magnets so you can remove the topper to properly clean the lid.
The large ice pieces, Lemon Lime Oranges, Car Coaster mold are from Amazon
Small Ice from Joanns but you can also find them at michaels and hobby lobby.
Fruit: www.amazon.com/dp/B07Z818F4Q/...
Ice: www.amazon.com/dp/B07CBTNQCN?...
Mold: www.amazon.com/dp/B08M3W4PZZ?...
Magnets
www.amazon.com/dp/B0753ZPBLQ?...
This is the best tutorial but I have seen yet!
Hands down the best tutorial!!
I love how you put the magnets in the mold with the epoxy. Great idea. Will definitely use that.
I have been looking everywhere on how to do the attaching method ! Thank you so much for such an easy to follow just the facts tutorial!
Blessings this is such a beautiful piece of craft just loveing it great job thanks for sharing
You couldn't have made this any easier!! Thank you so much!!!!
Thank you for responding to questions in comments. I had a few and was able to scroll and find the answers quickly. You have a new subbie!!
Thank you!!!
OMGoooodness thank you so much for this wonderful tutorial😊I’m doing my first topper tomorrow & putting the lil magnets in the epoxy & the lid is a FANTABULOUS idea🙌🏻😍❣️
You made this look simple. Great tutorial and I definitely had to subscribe!
Good Job! Because I refuse to buy a drill and do it that way. You're a lifesaver because I'm about to make one for my granddaughter. New subie :) Thank you!
What a wonderful idea 👏🥳 ingenius
Super cute!
Thank you!!
Wonderful tutorial tfs❤
love these
❤thanks for this video!!
Thank you for this videos
Thank you so much perfect video!!
Are the tumblers sublimation? If so where did you get the image from they are amazing
What resin/epoxy do you suggest using? These are awesome! You've done an awesome job!
So beautiful, what is the thickness of the epoxy coasters?
Where di you get the images for the cups? They are great!
what color green glitter did you use and from where? I love these cups
I placed the magnets in the mold added the epoxy when I came back to check the magnetics had moved together in the center
You must have some very strong magnets. I’ve not experienced that so I’m not sure how to fix it.
Can the tops be run through the dish washer? Not the one with the desgin on top but the other? Or is it hand wash? Whats the washing intructions on it?
These are nice however I prefer UV resin and UV flash light to apply cubes and fruit.
I have the two size car coasters but my small one doesn't fit. Did you make any adjustments to the coaster piece before use? TFS
Where did you get your decals?
This is awesome. Can you tell me after you hot glue your ice on do you add epoxy to the ice? Thanks great easy video.
No, No epoxy
Wow❤️
What size are the magnets and where did you buy them?
Very nice and thank you! Did you add glitter to this tumbler or is this a glitter design? Thanks.
Yes I added glitter
nice video new subbie!
Great video. Do you keep the slide or discard? I’m fairly new so wondering if anyone has ever requested a replacement slide. I have one type of lid that part of the top broke. The mfg doesn’t offer replacement lids so I had to buy a new cup. It was hubby’s favorite and he didn’t want a different one.
I’ve been giving the slider to my customers. Mother Tumbler does offer replacement lids
Keep to put on when don’t want topper
Is Epoxy safe around food and beverage?
Thanks for the amazing video. How do you remove the slider without breaking it?
Mine just pops right off
So will the molds fit other cups such as Hogg skinny or craft haven skinny
I don’t use Hogg or craft haven so I’m not sure. I just know it will fit the skinny from mother tumbler
OMG this video is amazing...thank you so much. Quick question could you use epoxy vs. UV Resin?
Yes
This is awesome and thank you for this, but I have a quick question with the resin glue you used for the magnets. Can I use monster glue or E6000 instead of resin glue?
Yes you can use whatever you want. I didn’t use E6000 because it takes so long to dry and slips around a lot so if you have patience then go for it.
@@taragentile1416 awesome thank you so much I'm so excited to do this thank you for the video...
Do you add any resin to the “ice” or just the hot glue? Thank you for your video you made it so easy.
No she didn’t just the glue
Where to buy these items?
Since magnets rust fairly quickly, did you do something to prevent that from happening?
I would hope that everyone would wash and dry them so they didn’t rust.
Can you tell me the name of the ice from Joanns. Can seem to find it.I’ve been looking for the smaller ice pieces
I no longer have the package but I think it was called accents or something like that.
So I have the coasters is it suppose to fit down in the top? Or does it stay at the top
I don’t know what brand of tumbler your using but mine fits in my lid but does sit on top because of the magnets
Where did you get the magnets/ what type are they?
I updated the description and added the magnets they also came from Amazon
NOt topper related! ... where is your glitter from?? love the colors
Glitter Heart Co
@@taragentile1416 Thank you!
Where do you get your tumblers? I haven't seen this type of lid,I only see the ones with a slide to close the opening. I need these!
I have a link in the description, they are from Mother Tumbler. They come with a slider but I took the slider off
@@taragentile1416 Thank you. I am putting my order in right now!
I created the mold for the toppers. Is it suppose to fit perfectly on top? mind kind of is not level. And yes, I have the correct size mold 🥰
Hmmmm... mine is level so I’m not sure what happen.
@@taragentile1416 is lays perfectly on top just not down in the inside, is yours down in the lid?
If your not using a tumbler from Mother Tumbler then I’m unable to help you. Mother Tumbler is the ONLY tumbler supplier I use so I can’t speak for tumblers from other companies
Do you have a link for the uv light and uv epoxy.
Any UV resin or light will work. I’ve had mine for a long time
another thing I see, your lid is the slider--my slider is kind of bulky on top...you know where the thumb goes..thinking that may be the problem why its doesn't fit all the way down even....what is the name of our moms tumbler?
I took the slider off. I’m using the Straight AF or You bet your skinny from Mother Tumbler
@@taragentile1416 ahhhhhh....you didn't show that part😎
Take slider off or use different top
Why do you show two sizes of the mold
It was a pack that came with 2 sizes and they work for different sized cups.
Do u have link to where u gt the molds
The link is in the description
How does the hot glue hold up in hot climates though?
It’s never recommended to leave tumblers in the heat for long periods of time and that’s the same care Instructions for the lids.
Where is the resin from, link?
Amazon but I’ve had mine along time. Just look for UV Resin
How long did you leave it under the uv?
Each magnet side I do the 30 seconds and then when all of them are done I do it for a minute
3 mins till light turns off
Can you list which uv lamp you purchased and where?
You can use any UV light from Amazon. I’ve had mine for years
@@taragentile1416 thank you!
Do you have to use UV resin or will any resin work?
I’ve only tried it this way. I’m sure you can but you’ll wait longer for it to cure that’s why I liked the UV resin
Is the UV lamp the kind that you use for nails?
Where do you get the magnets from?
I updated the description and added the magnets they also came from Amazon
@@taragentile1416 thank you so much!
Love the video, you made it super easy to follow!!
Dollar tree
THESE MOLDS WAS TOOOO BIG FOR MY 20OZ TUMBLER
Did you use the same mold and a tumbler from Mother Tumbler?
Where did you get your decals?
MightyMammaDesigns on Etsy
@@taragentile1416 Thank you!