REBUILDING A CHEAP BMW M5 COMPETITION | PT 3

SdĂ­let
VloĆŸit
  • čas pƙidĂĄn 24. 01. 2023
  • Grab a YFood Taster Pack Here USE CODE MAT-CZcams 👉 bit.ly/MatArmstrong_yfood_yt
    The mechanic who bought this BMW M5 Competiton before me decided not to fix it after finding structural damage to the strut tower. I then bought it from him and attempted to fix it myself. In the previous video i replaced the strut tower despite BMW not being able to give us any help or advise on how to do it. But now that its replace theres even more damage to repair & there's one issue which arrises with the 2019 M5 which wasn't there when i bought it.
    âŹ‡ïž FOR MORE CONTENT CHECK OUT MY 2ND CHANNEL âŹ‡ïž
    / @uc2fzqeajkpno6imkqglvpsg
    âŹ‡ïž SAVE THE MANUAL HOODIES âŹ‡ïž
    matarmstrong.co.uk/collection...
    Check if your car was damaged with Car Vertical - 10% off here 👉 www.carvertical.com/gb/landin...
    âŹ‡ïž FOR DISCOUNTED GENUINE BMW PARTS | BMW SYNTER LEICESTER âŹ‡ïž
    Email: parts.bmw.leicester@sytner.co.uk
    Tel : 0116 2827711
    (USE CODE MAT15)
    âŹ‡ïž ALL MA MERCHANDISE âŹ‡ïž
    matarmstrong.co.uk/
    âŹ‡ïž Follow Me Here Aswell âŹ‡ïž
    / matarmstrongbmx
    / matarmstrongbmx
  • Auta a dopravnĂ­ prostƙedky

Komentáƙe • 2,9K

  • @zollotech
    @zollotech Pƙed rokem +229

    I was wondering if you let left the lever underneath engaged to put it in neutral on the bell housing. You probably checked, but just a thought. Looking forward to the rest of the video.

    • @pierrereneerkens7671
      @pierrereneerkens7671 Pƙed rokem +8

      I was thinking the same

    • @rcoolwind
      @rcoolwind Pƙed rokem +1

      Yeah, good call

    • @MatArmstrongbmx
      @MatArmstrongbmx  Pƙed rokem +128

      Nope it’s stuck in park đŸ„Č the lever underneath was to pull it in neutral and I’ve pulled th zip ties off

    • @soringherasim7633
      @soringherasim7633 Pƙed rokem +6

      Hi Aaron (zollotech ) I am following your channel to , didn’t know u like cars to.
      It is so satisfying to watch Mat. U guys keep up whit a great work. See u guys around. 😎😎😎

    • @EverythingAwesomeTech
      @EverythingAwesomeTech Pƙed rokem

      Hi @zollotech I’m a fan!

  • @leebarber5528
    @leebarber5528 Pƙed rokem +3886

    The only downside about mats videos. They are just not long enough could watch this guy all day đŸ”„đŸ”„đŸ”„

    • @ATV-Grace
      @ATV-Grace Pƙed rokem +39

      100%!!! đŸ€œđŸ€›

    • @neildodsworth48
      @neildodsworth48 Pƙed rokem +33

      I'll second that. Was a balsey move to start that car. £622 for an intake manifold is insane, just shows you why us mere mortals shouldn't run an M5 😁

    • @leebarber5528
      @leebarber5528 Pƙed rokem +15

      @@neildodsworth48 exactly mate, I struggle to run my 330D most days

    • @zebra3519
      @zebra3519 Pƙed rokem +10

      Agreed, I'm watching this one again.

    • @keith_9420
      @keith_9420 Pƙed rokem +17

      He should start making 1 hour videos😂

  • @sunnydindoyal7504
    @sunnydindoyal7504 Pƙed rokem +113

    This guy has a positive attitude... although things are going as hell.. he is still happy and not giving up. this guy will go far in his career.

  • @MuriloBauerAYYLMAO
    @MuriloBauerAYYLMAO Pƙed rokem +286

    Hey Mat, I have some experience working on BMWs and would like to help you diagnose, here are some ideas to start:
    - The amount of points you bled the brake system from; how many?
    Though I'm unsure of F90s specifically, from what I've seen on an F10 M5, you need to bleed each corner from two seperate holes: one to bleed the inside pistons, one for the outside pistons.
    - Try compressing each piston fully while bleeding it, this should help get trapped air out.
    - Some specs of the newer BMWs lock out the gear lever if the driver door is open, sometimes even if just the seatbelt is off. Due to the airbag system and the restraint system being tightly connected, I suspect there's a slim chance airbag errors could lock you out if it's one of the cars that check if the seatbelt is off. It's unlikely but certainly a possibility i guess
    - Pump the brake pedal during ABS bleeding
    - I can hook you up with a very recent & clean version of ISTA if you want to try the ABS bleeding procedure with that.
    cheers

    • @Slix_SA
      @Slix_SA Pƙed rokem +1

      ❀

    • @CK-jv5mn
      @CK-jv5mn Pƙed 11 měsĂ­ci +3

      Same with my f80, me and my mate couldn’t figure it out 😅

  • @dougieturnbull8830
    @dougieturnbull8830 Pƙed rokem +767

    I’ve had the same problem changing brake fluid on a couple of BMW’s, it was air trapped behind the calliper pistons. I had to push the calliper pistons back with the bleed valves open to remove the air, also try pumping the pedal at the same time as the diagnostic tool is working the abs pump, this worked for me

  • @KareemKayy
    @KareemKayy Pƙed rokem +275

    seeing matt's face lighten up when he first started it up, shows how much hard work he really put into this build, such a huge accomplishment, so proud of you man!

    • @bumansooralyileili1975
      @bumansooralyileili1975 Pƙed 10 měsĂ­ci

      I was thinking the same as you 😂😂😂 i loved how honest his face with his work ❀❀

  • @ViiralDzn
    @ViiralDzn Pƙed rokem +200

    This M5 series is golden, Congrats on 1 million. Looking forward to the next episode already!!

  • @robertbyrne781
    @robertbyrne781 Pƙed rokem +13

    We do this bleeding procedure in work with vans, you have to connect a pressure bleeder to the brake fluid reservoir with atleast 1.5 bar of pressure, and bleed each corner with the computer while someone pumps the pedal, you need someone to pump it to help physically push the fluid out of the abs pump as it activates the solenoid valves internally, hope this helps matt 👌

  • @46rdn
    @46rdn Pƙed rokem +354

    You have become one of my favorite youtubers so quickly. I have binged all your series and it has inspired me so much.

  • @mantelisbudrys6114
    @mantelisbudrys6114 Pƙed rokem +109

    we need more of your dad , droping a golden knowledge, btw Mat congrats on 1MIL.

  • @shotta287
    @shotta287 Pƙed rokem +35

    You’ve come an unbelievably long way, I remember your early videos. You should be really proud of yourself and what you’ve achieved. 1 million subs is no joke!!

  • @siriusplayz5871
    @siriusplayz5871 Pƙed 11 měsĂ­ci +20

    Man I just stumbled upon this channel and I'm loving the series.. you've so much positive energy I even watched the sponsored part 😂
    Stay blessed brother ❀

  • @Ali-AhmedShah
    @Ali-AhmedShah Pƙed rokem +260

    Congratulations for 1M Subscribers Mat!
    Still is hard to believe not even 3 years ago I was watching your videos and you had less than 80K Subscribers!
    What an absolute milestone!
    Carry on grind and making our days and we are always there for you!

  • @markumotors
    @markumotors Pƙed rokem +184

    Congratulations on reaching 1M of subscribers, you deserve it! Thanks for the inspiration and for demonstation that the Hard Work Beats Talent.

    • @chrismohlala1682
      @chrismohlala1682 Pƙed rokem +2

      He should buy a BMW 1m to build and keep with a sick wrap just for that

  • @m8arx
    @m8arx Pƙed rokem +7

    Smacking the maltesers away, getting your mrs to check the headlights are working, smiling and staying positive through every issue - absolutely love your channel and videos. Cant wait to see this project finished.

  • @DillandShaj
    @DillandShaj Pƙed rokem +28

    Man seeing your emotions at 14:20 is what it's all about. You're such an awesome dude that's always so down to earth and hard working. You deserve all the success you have and more man! Really really enjoy watching your content and they're all amazing and congratulations on your 1M subs!!

  • @jamesbencke3319
    @jamesbencke3319 Pƙed rokem +30

    A treat to see you and your Dad working together and having a great time. Memories are made from this!

  • @tomogic6361
    @tomogic6361 Pƙed rokem +149

    Mat I've had this issue before on my BMW X5. Had to use a pressure bleeder to provide pressure and fresh fluid, then using the computer activate the ABS pump. Repeated the same thing about 3 times and then brake pedal was back.

    • @stephensomersify
      @stephensomersify Pƙed rokem

      ABS modules are bastards

    • @seanpaul3050
      @seanpaul3050 Pƙed rokem +8

      Gunsons ezi bleed. 20 quid. How can Mat not know this by now. Bloody Cowboy.

    • @dannywall7074
      @dannywall7074 Pƙed rokem +5

      I was the same with my X5, turns out it's the same on all BMW's. There's lots of CZcams clips of this procedure. That's how I done mine, bought the software for my laptop to do the electric pump side of it.

  • @davidsibley4857
    @davidsibley4857 Pƙed rokem +3

    When bleeding brakes that have been apart like this I found using a different colour fluid helped me track when new fluid was pushed through, ATE Super Blue was fab for this and you could alternate from yellow to blue each service. Also an Eezibleed kit is good for pressurising the system, I use about 25psi. You need decent pressure behind it. The computer is pulsing the ABS solenoids to try and push the fluid (and air) through so having pressure in from the top assists this.

  • @dima6891
    @dima6891 Pƙed rokem +2

    Your dads smile while works with you is priceless. Way to go Mat hope good things come your way always!

  • @ShrimpPlays
    @ShrimpPlays Pƙed rokem +81

    There are 2 reasons I'm so HAPPY right now.
    1. You hit 1 Million subscribers! Congrats Mat. Been on the ride since 250k!
    2. I'm watching a 23min upload on the BMW. What a way to end the day.

  • @mutant_camel
    @mutant_camel Pƙed rokem +56

    Mat's face when he started the car was like a 6yr old seeing their presents at Christmas. Doing what you love, with your Dad, girlfriend and your mates and getting paid for it. Yes Mat, you did make the right choice, boy from Leicester done good. Congrats on the 1M subs and don't ever lose your enthusiasm, its so infectious!

  • @deanasser8813
    @deanasser8813 Pƙed rokem +4

    Check to see if the master cylinder piston is not stuck inside the base of the master cylinder, I have experienced this if the brake pedal was pushed with calipers removed or no fluid, it may not have a return spring in the master to push it back, it's easy to tell if the pedal has little to no resistance at all. Worth a shot! Loving your videos bringing these beasts back to life!

  • @crave8687
    @crave8687 Pƙed rokem +4

    I totally enjoy watch Mat rebuild any vehicle. He's saw exciting and documented when it comes to the rebuilds process! Great Job all the time.

  • @Ivan-yr1qj
    @Ivan-yr1qj Pƙed rokem +337

    Your dad is an absolute legend, I laughed it loud when he told you the brakes still didn't work. We need more of matts dad.

  • @kevin_bailey158
    @kevin_bailey158 Pƙed rokem +126

    Usually you need to have a pressure bleeder regulated to 2 - 3 bar and use the diagnostic equipment to activate the ABS pump valves and someone sat in the car pressing the brake pedal all at the same time and you need to start at the furthest wheel away from the brake master cylinder. Love the vids Mat just wish they were uploaded every day lol

    • @louisdobson9574
      @louisdobson9574 Pƙed rokem +14

      I’ve done this method a few times and it was the only way that worked

    • @beestreamt6601
      @beestreamt6601 Pƙed rokem +2

      Like so that mat sees it

    • @dannyboyls
      @dannyboyls Pƙed rokem +1

      This is the official mercedes benz way on some of their cars, pressure bleeder set to 2-3 bar, bleed nipple open, keep pumping the pedal with the nipple open, all of a sudden you get extra air bubbles out

  • @Alex-od7tl
    @Alex-od7tl Pƙed rokem +5

    You are sensational to watch, I love how excited you get when you figure something out and it works makes me exited as well feeling that I am part of the team, I find myself high fiving the screen. thank you for your awesome content and videos! Cheers mate from Boston!

  • @Sam01951
    @Sam01951 Pƙed 8 měsĂ­ci +7

    I am not a car guy, but this channel is surprisingly entertaining. Keep it up Mat!

  • @memimemi4887
    @memimemi4887 Pƙed rokem +102

    This boy is getting better and better đŸ’Ș
    Much respect from Finland đŸ‡«đŸ‡ź

  • @mazz1557
    @mazz1557 Pƙed rokem +39

    Coming from a guy that grew up in a body shop, has rebuilt many cars and enjoyed them, I tip my hat to Mat for taking this passion that many of us share to the next level. WISH I WOULD HAVE DONE THIS!! :) Maybe double check the routing of that belt...

  • @laznaldo
    @laznaldo Pƙed rokem +9

    Be careful as the OPFs are located in the link pipe of the exhaust system and not in downpipes on M5 F90. If you intend to replace the downpipe only, you will loose the pressure connection and keep the filters, which may cause some damage.

  • @roholidays
    @roholidays Pƙed rokem +24

    When will the part 4 appear? I am very very anxious to see what you have done!!!

  • @kn0t2brite
    @kn0t2brite Pƙed rokem +2461

    I think you should give this one to your dad when your finished. He deserves it for all his hard work.

    • @ToukoK
      @ToukoK Pƙed rokem +120

      And an M5 is such a dad -type of car 😂

    • @lewisrichardson8556
      @lewisrichardson8556 Pƙed rokem +141

      Are you mats dad

    • @clausnepperchristiansen7394
      @clausnepperchristiansen7394 Pƙed rokem +51

      @@ToukoK well, i am a dad, and i would love to have it 😁

    • @danyalali5461
      @danyalali5461 Pƙed rokem +29

      @@lewisrichardson8556 I am your dad , buy me a m5

    • @02lucy666
      @02lucy666 Pƙed rokem +20

      @@ToukoK my dad used to own an e34 m5 when they were new, so yeah, these are perfect dad cars!

  • @doublekay3194
    @doublekay3194 Pƙed rokem +43

    I didn't even know I was interested in car rebuilds until I found this channel.

  • @izginzs
    @izginzs Pƙed 10 měsĂ­ci +4

    Unbelieable how positive and full of energ thid guy is. Even watching sponsored part is hilarious😃

  • @almann101
    @almann101 Pƙed rokem

    On BMs if you empty the overflow reservoir and allow air into the abs sensor / master cylinder it has to be refilled by BMW using a specialist high pressure system. In the Haynes manual it warns you about this if you're doing the brake bleed. You've got to make sure the reservoir is always full.
    Welcome to working on BMs!
    Great video as usual Mat, your old man is a legend as well.
    Congrats on the million subs too. Well deserved. Love these videos.

  • @rossgofield
    @rossgofield Pƙed rokem +34

    Mat, I just wanted to say thank you for your videos! I have been having probably the worst time in my life for the last 10-11 weeks and only came across your channel during this. Your energy and enthusiasm in your videos has cheered me up during some really 'dark' days. Thankyou.

    • @Ashf79
      @Ashf79 Pƙed rokem +5

      Hope everything works out for you mate 🙏

    • @samboy8815
      @samboy8815 Pƙed rokem +6

      Hang in there buddy, everything in life is temporary. Mat shoes anything is possible if you work your arse off.

    • @garyhall4449
      @garyhall4449 Pƙed rokem +3

      Hang in there. Better times are ahead đŸ‘đŸŒ

    • @smokoguap
      @smokoguap Pƙed rokem +2

      Get better bro

    • @taliyy_
      @taliyy_ Pƙed rokem +2

      God does not burden a soul beyond what it can handle

  • @renemerrild8670
    @renemerrild8670 Pƙed rokem +23

    Your sponsors must love you! You are one of the few youtubers that actually not make me skip the sponsor part :)

  • @feudallordcult
    @feudallordcult Pƙed rokem +2

    that didn't feel like 23mins at all. it felt like 2mins and i just can't get enough of your vids. great passion!!!

  • @Alphaswings
    @Alphaswings Pƙed 6 měsĂ­ci

    but man mad respect for how you do this without ever having worked on a bmw, the amount of wires on top of the engine gave me anxiaty

  • @jonnyharris2724
    @jonnyharris2724 Pƙed rokem +34

    2 things to think about for you mat. My bmw won't let you put it in gear when the door is open and I also read once that some cars are designed so the pedals collapse in a collision so you don't smash your feet/ankles đŸ‘đŸ»

    • @teejayleduc9208
      @teejayleduc9208 Pƙed rokem

      đŸ€žđŸ‘ŒđŸ’Ż

    • @ViszlaBoss
      @ViszlaBoss Pƙed rokem +3

      How annoyed would he be if it was just an open door that stopped the car going into gear 🙂

    • @F760
      @F760 Pƙed rokem

      @@ViszlaBoss you can put these cars into gear with the door open. You have to keep a little brake pressure applied as you idle around. If you just come off the brake like your pulling away it’ll go back into gear thinking you fell out or some shit lol. Mine does it all the time when moving cars around.

  • @ClydeeBoii
    @ClydeeBoii Pƙed rokem +39

    Congratulations on the 1M mat!! You definitely deserve this feat.

  • @nathan5088
    @nathan5088 Pƙed rokem +3

    Found Mat by accident after looking for new content and seeing the M5 Video and now I’m hooked to be fair, great content from a run of the mill guy with a can do attitude and happy to learn as you go. Well done mate I’m sure you’ve inspired many others with your work and can do attitude 👌

    • @ItsOk1997
      @ItsOk1997 Pƙed rokem

      Bro go watch from the start, you're going on a good long ride with videos and binge. Kind of jealous of you for having found him now and have so many episodes to be excited about.

  • @liamford4667
    @liamford4667 Pƙed rokem +1

    Watching you and your following grow like it has is absolutely crazy! I'm proud of you Matt! I can't comprehend how happy you must be

  • @Kevin_x.o
    @Kevin_x.o Pƙed rokem +15

    Thank you for amazing entertainment Matt and also you've inspired me to chase my dreams in all aspects of my life. You've shown me that anything is possible if you set your mind and sheer will to it. I know this is a car enthusiast channel but it's so much more than that to me. Appreciate it Matt and congratulations on 1 million subs. It gets better here on out.

  • @dreamfightgame
    @dreamfightgame Pƙed rokem +8

    Every follower is pulling for you man! Love your ambition and determination. This stuff will inspire a lot of people watching to commit to whatever they're into.

  • @rirukki
    @rirukki Pƙed 5 měsĂ­ci

    doing all of that witouth proper instructions and knowledge is actually amazing.

  • @shaileshgovekar7461
    @shaileshgovekar7461 Pƙed rokem +5

    I love your hard work and pure optimism on every build. Keep going Mat

  • @SilentEntity
    @SilentEntity Pƙed rokem +8

    I can’t describe how much I admire you. You re not an engineer and you re managing every time to success.. you re simply amazing dude

  • @davidndees
    @davidndees Pƙed rokem +5

    I really did not want you to start it, but holy moly when it started up that was the most exciting moment so far on this repair! I'm having a great time watching your videos mate.

  • @Ninoy2059
    @Ninoy2059 Pƙed rokem +2

    What can I say Mat. Everything is spot on. Great video, great attitude and great personality. I am sure your dad has to do a lot with it. Thank you mate, and shoutout to your dad. Cheers.

  • @christerlarsson5232
    @christerlarsson5232 Pƙed rokem

    Great to see it all moving forward... would like to see a little more how you go... when replacing the broken electrical contacts. Thanks for this lovely video

  • @SmplBuilds
    @SmplBuilds Pƙed rokem +8

    Was a pleasure to see how happy you were on that M5 first start haha and Congrats on 1 million!! Love following your journey :)

  • @performance_engineering
    @performance_engineering Pƙed rokem +12

    Try a pressure bleeder and use around 28-30psi. I find you have to use higher than normal pressure on the bigger brakes to get a pedal but this should let you shift into gear. Absolutely love the videos 👍👍

  • @paulmackay6376
    @paulmackay6376 Pƙed rokem +1

    Congrats on 1M subscribers Mat......major milestone and reward for all your effort. Well done.

  • @jeffreycontreras1872
    @jeffreycontreras1872 Pƙed rokem +10

    Completely inspired me to start my first project a 2006 Mercedes Benz S500 so excited to start the rebuild of it!

  • @0skarLee
    @0skarLee Pƙed rokem +24

    Congrats with 1mil. Literally one of the greatest channels✹

  • @boxoffisa
    @boxoffisa Pƙed rokem +1

    This man loves challenges. Buying it that money and still adding in time, emotions and mental strength. He is the man who inspires.

  • @TheDavedadd
    @TheDavedadd Pƙed rokem +4

    Fantastic build series Mat. Your skills never cease to amaze me with these builds. Such an overly engineered car these Bmw's. Enjoying the series. 😀

  • @toughmat88
    @toughmat88 Pƙed rokem +12

    Massive congratulations on hitting the milestone, been watching from day one. Keep up the good work 👏

  • @18jamesj
    @18jamesj Pƙed rokem +8

    Massive congrats on reaching 1M. Can’t believe how far you’ve come mate, been a pleasure watching đŸ™ŒđŸ»

  • @Paul-ws8lh
    @Paul-ws8lh Pƙed rokem +1

    Congrats on the 1m subs. I found you by accident when you had the Q5 and have watched you since. I’ve given up with some other CZcamsrs as they get quite samey but your vids are always great to watch and honest. Plus yours are inspirational whilst being down to earth still. Keep up the good work Mat!

  • @farhatiqbal3089
    @farhatiqbal3089 Pƙed rokem +2

    Congratulations Mat on achieving 1 million subscribers! You truly deserve it! I'm seeing a 950hp M5 in the distance future. Fit LCI taillights as well. It was well worth seeing you progressing on from chilling at Indoor BMX park to rebuilding monstrous cars. Keep it up ;)

  • @davidtwittey4613
    @davidtwittey4613 Pƙed rokem +3

    Great episode! Congrats on 1m subscribers & I'm impressed how with the chassis repair how the engine & suspension all lined up. I'm sure you will have worked with viewer suggestions how to get the gears selected again. Good work Mat always inspirational.

  • @marlonmalone8628
    @marlonmalone8628 Pƙed rokem +388

    Hey Mat, you’ve got to replace the airbags first and recode the sensors, then the brakes will work @matarmstrong

    • @commonsenseisdeadin2024
      @commonsenseisdeadin2024 Pƙed rokem +9

      Seriously? (serious question, I do not know so I say that not in a ashole manner just to clarify)

    • @thegringlemingler276
      @thegringlemingler276 Pƙed rokem +93

      Ah the good old "you've been in an accident so we're taking away your braking privileges"

    • @elbystump56
      @elbystump56 Pƙed rokem +3

      No

    • @gerhardlamprecht1098
      @gerhardlamprecht1098 Pƙed rokem +5

      No this is not true. Braking is mechanical worth hydraulic assist. To put it differently if you remove the battery from your car, you won't be able to press the brake to the floor like Matt did.

    • @DzDzDzzzz146
      @DzDzDzzzz146 Pƙed rokem +1

      nope, he just have to put is autel go in brake menu and purge properly from there but he think it's a 90' car so......
      and anyway.. this have nothing to do with the brake switch the gearbox is getting its signal from so xD

  • @mac1ouda
    @mac1ouda Pƙed rokem +1

    Amazing what you can do with a positive attitude, and taking things 'bite sized' chunks at a time! Love your man, keep it up!! 🙏👌đŸ’Ș

  • @BitcoinKal
    @BitcoinKal Pƙed rokem

    Your “can do attitude” blows my mind. I’d have given up a long time ago, not to talk about the anxiety that would have developed after unsuccessfully trying to fix it first time round. Keep up the fantastic work. You’re a shining light to us all budding amateur drive way mechanics. 😆🙏

  • @Human2Ai2030
    @Human2Ai2030 Pƙed rokem +72

    It won't go in gear if the drivers door is open, for safety reasons. If its in drive and you open the door it will automatically go into parking . Great work again.

    • @SalisburyKarateClub
      @SalisburyKarateClub Pƙed rokem +5

      My dad before he passed away bought a new car, and the things he had to do to get it started. Door shut, seat belt on through him multiple times.

    • @Human2Ai2030
      @Human2Ai2030 Pƙed rokem +8

      @@SalisburyKarateClub New Tesla now a day's, retina scanning, finger print scan ,, breath test, logging in iD,, voice recognition and 10 thousand character touch password word ! Door won't open if someone park's to close to you ! So you can't get in the dam thing 😉😁

    • @jonathanchefski3120
      @jonathanchefski3120 Pƙed rokem +4

      Mine goes into gear but when you give it throttle it auto shifts to neutral until you close the door and then have to move shifter back to neutral position and then to drive position again for it to engage, I got stranded for a few minutes once cause I couldn’t figure out what was going on 😅

    • @Human2Ai2030
      @Human2Ai2030 Pƙed rokem +1

      @@jonathanchefski3120 Auto door lock is a must ! Someone tries to car jack you ? Soon as they open the door , it goes into neutral and you can't drive off ! First time I drove my wife's BMW 330 M 2019 I nearly crashed into parked cars at 30mph. I went over the central white line to overtake parked cars without indicating and like a PS5 Steering wheel it suddenly steered me left , nearly hitting parked cars !! I had to fight with the steering wheel to avoid an accident !! I then turned down all assistance settings after that near miss ...

    • @walther89
      @walther89 Pƙed rokem +2

      it will but it will go back in P if you release the break, there is other problems related.

  • @sygnosis
    @sygnosis Pƙed rokem +4

    Love the channel, love watching you and you dad build some memories on the cars. ❀

  • @zsoltrusko2829
    @zsoltrusko2829 Pƙed rokem +3

    such a bold project, I am sure you'll figure it out. great job, great progress. especially like the 3 finger wheel alignment check on a 600 bhp car 😀

  • @MrGuitarMan335
    @MrGuitarMan335 Pƙed rokem +12

    "Hannah, just see if the headlights work" - brilliant! Love this mix of education, suspense and humour in your vids, Mat x

  • @arustyspoon8936
    @arustyspoon8936 Pƙed rokem +315

    You need a pressure bleeder and then do the test again because it needs to have pressure from the master cylinder😊

    • @djkucuk
      @djkucuk Pƙed rokem +80

      Wasn't there like a safety feature on some cars which when crashing the car loosens the brake pedal so your leg is not under pressure.

    • @rasmusalmqvist5960
      @rasmusalmqvist5960 Pƙed rokem +11

      @@djkucuk good thinking... 🧐

    • @jordanlegard3764
      @jordanlegard3764 Pƙed rokem +3

      @@djkucuk I had a mk4 golf that happened on

    • @arustyspoon8936
      @arustyspoon8936 Pƙed rokem +6

      Possibly, my thoughts was not enough pressure going through the abs module as had the same problem with Corsa vxr, Matt has to check fault codes to make sure it doesn’t have a fault

    • @tompstomps
      @tompstomps Pƙed rokem +2

      @@djkucuk that’s what I thought mate

  • @yorkshirecarrestoration
    @yorkshirecarrestoration Pƙed rokem +20

    LEGEND. Mat, you NEED to send us your E24 and we will sort all the rust out on it free of charge. We are not far from you. Give us a shout, we will record and upload the entire process. Keep on the hard grind, great to see your channel grow! Congratulations on the 1 million subs!

  • @craigsmith4983
    @craigsmith4983 Pƙed rokem +1

    A million congratulations on your milestone. Well deserved. Keep the awesome work going.

  • @allankimani7829
    @allankimani7829 Pƙed rokem

    Enjoy the video? Oh yes I did! Fact is,I have been on the lookout for this one eager to learn what happened since you removed the engine. Can't seem to get enough of the exuberance, camaraderie and sheer motivation, expertise shown by the crew,including your wife and dad.Awaiting next video, car fan,Kenya.

  • @djmagikkal
    @djmagikkal Pƙed rokem +9

    In a fly car like that I would be listening to the song “Dupe- Gangsta “ đŸ„¶đŸ„¶đŸ„¶

  • @sheffieldknifesharpening
    @sheffieldknifesharpening Pƙed rokem +26

    I really love this series. Smashing it mate. 🙌

  • @zainajmal1822
    @zainajmal1822 Pƙed rokem

    Well done Mat for making this amazing 1M achievement, waiting for the next mile stone. Super pleased with all the vids about cars and repairing them. Keep up the hard work and I think u should give a car to your dadđŸ‘đŸœ

  • @DanH616
    @DanH616 Pƙed rokem

    Great to hear your Dad's laugh. Priceless memories in the making.

  • @ImranKhan-iq2gf
    @ImranKhan-iq2gf Pƙed rokem +3

    whenever mat does a BMW rebuild I get goosebumps well done Mat another epic video 👏👏👏 that look when the car started priceless
    you should definitely have more videos with ur dad posted

  • @mista5796
    @mista5796 Pƙed rokem +15

    Matt, you can get a non return valve (aka one man brake bleed kit) to put over each bleed nipple. Start with the rear wheels first, then move to the front. Because air has become trapped in the ABS module I think you’ll need a pressure bleeder to force the brake fluid through the ABS module under pressure. Have someone topping up the level in the reservoir as required. Someone else pumping the brake peddle and a 3rd person checking the tube connected to the non return valve. Make sure you put fresh fluid back in not the old stuff.
    But before trying to drive it, replace all the airbags and anything else that got damaged. Clear all the codes and it should be good to go. BMW’s are fussy with their interlinked systems. If it detects safety issues it won’t let you drive
    Good luck dudeđŸ€ž

  • @jasserbelkhiria3894
    @jasserbelkhiria3894 Pƙed 7 měsĂ­ci

    That look on your face on the minute 14:22 made the whole video worth to watch. I'm having a blast watching your videos. Keep up the good work

  • @ulehuleh
    @ulehuleh Pƙed rokem +2

    top video mate as always. I'm worried about that serpentine belt, logic says the back of the belt should be running on the water pump pulley, usually they can go on a few different ways in terms of length, however there is only one correct way. Id be looking into finding a diagram for that. Maybe the master cylinder is bypassing with the brake issue?? who knows. best of luck man looking forward to the next video

  • @joransj148
    @joransj148 Pƙed rokem +5

    Congrats on 1m subs Mat, you're doing great. Keep up the awesome video's!

  • @seanwoodward140
    @seanwoodward140 Pƙed rokem +63

    This guy needs his own tv show. I’d happily sit and watch Mat on the one of the discovery channels 😂😂

    • @MEchanicAL_LSTAR
      @MEchanicAL_LSTAR Pƙed rokem +27

      Why. He’s doing this all on his own and his own boss. No need to bring pencil pushers in. Tv shows are old money. Mats in the right place

    • @phatlaz1974
      @phatlaz1974 Pƙed rokem

      Gas monkey can assure you don’t sign with the net work.

    • @CMDRRustyDog
      @CMDRRustyDog Pƙed rokem +1

      @@MEchanicAL_LSTAR Agreed !

    • @stuartparry1649
      @stuartparry1649 Pƙed rokem +2

      Discovery would ruin this channel and Matts creativity. This has to be the best channel on CZcams by a country mile.
      I just have one comment for Matt, please evolve using the same process you're on and not go the way of Tavaresh...I used to love his vids, especially his creativity, but then he chose the money instead.

    • @mattychapatti7342
      @mattychapatti7342 Pƙed rokem +1

      Hes got one here and he's doing it his own way.

  • @paulconnor2261
    @paulconnor2261 Pƙed rokem +1

    Honestly your patience and memory are truly amazing

  • @ianlouw7431
    @ianlouw7431 Pƙed rokem +1

    ISTA or IMPA is required - I work on BMW's and thet ABS module once it got air in is a beeatch ....start with the wheel FURTHEST from ABS unit and then work closer to the ABS unit. The diag software will indicate to press and hold the brake peddle etc.

  • @jordanguyy
    @jordanguyy Pƙed rokem +6

    I just want to say matt thank you for your videos you have given me the inspiration to begin this same process myself and I am currently saving for it all to begin as from March it should start so I will update you all then with my channel info and hopefully you all enjoy me as much as matt as I know enough but like matt I still have stuff to learn along the way..... P.N.L M-A-GANG đŸ™‹đŸ’ŻđŸ€žđŸ€

  • @bman2827
    @bman2827 Pƙed rokem +23

    It's a long shot but much like your theory of the bonnet being open, my beemer doesn't let me put it into gear when the door is open or my seat belt isn't on if I remember correctly. Great progress so far, I can't believe how far you've got in so little time!

    • @weerdonerd
      @weerdonerd Pƙed rokem +1

      yeah roll protection.

    • @Richie-C
      @Richie-C Pƙed rokem

      Mine the same

    • @TheRedstonelabz1
      @TheRedstonelabz1 Pƙed rokem +1

      Same i have a 2022 2 gran coupe and it does not go in gear with the door open

    • @THRIFTGARAGE
      @THRIFTGARAGE Pƙed rokem +1

      Than it usually shows that in the instrument cluster.

  • @alanjohnson6035
    @alanjohnson6035 Pƙed rokem

    Hi Matt, been watching your videos for a few months now (subscribed about a week ago) and they're always entertaining. Thanks for all the hard work put it on the cars and the videos and congrats on reaching 1 million subscribers.

  • @nickf5892
    @nickf5892 Pƙed rokem +1

    Love these videos ! Ive been working on cars for around 8 years now ! Love seeing you go for it ! At first it was cringy too watch, but I love the persistence!!

  • @DanielBall
    @DanielBall Pƙed rokem +20

    Just a thought Mat, have you checked to see if the master cylinder piston is actually being pushed by the brake pedal. The connecting pin could have failed in the crash. I had a similar issue years ago, and the clevis pin was actually missing in the end.

  • @jackharmston8592
    @jackharmston8592 Pƙed rokem +24

    Congratulations mat could the problem be brake master cylinder, plus if I remember correctly did you not manually put it in neutral underneath so you could move it round the unit ?

    • @jackharmston8592
      @jackharmston8592 Pƙed rokem +4

      5 minutes 50 seconds on the first bmw m5 video mate there’s a notch on bottom of the gear box you put it in neutral

    • @Dosahka
      @Dosahka Pƙed rokem +1

      @@jackharmston8592 that’s what i was thinking that because he put it in neutral manually, that’s why it doesn’t recognise the gearbox selection, some kind of failsafe
      There is a similar thing on Range Rovers, there is a screw underneath and a separate red lever underneath the cup holder to put it in neutral, both disables the drive select, but at least it let’s you know with a fault code 😁

    • @Richie-C
      @Richie-C Pƙed rokem

      I assume he remembered to do that đŸ«ą

  • @R53_trackaddict
    @R53_trackaddict Pƙed rokem

    Fairplay mate. You've come so far in the last few years. Big job this and you've smashed it. 👏

  • @Westside_Pixels_
    @Westside_Pixels_ Pƙed rokem +1

    Its been awesome following your journey. You are a living inspiration and proof that anything is possible if you believe in yourself. Quick question though, Uhm.... Is there a part 4 video? Id really love to see how this beast turned out.

  • @OneUp6666
    @OneUp6666 Pƙed rokem +10

    This man needs a Netflix show, not long finished your C63 project, enjoying this one too. Keep up the good content đŸ‘đŸ»

  • @nonsense9202
    @nonsense9202 Pƙed rokem +3

    Think I subbed at around 200k, which feels like 2 weeks ago!!! Insane but well deserved growth 🙌🙌🙌🙌

  • @hilmiwali
    @hilmiwali Pƙed rokem +1

    This channel is always has a spot in my heart

  • @lpc8278
    @lpc8278 Pƙed 11 měsĂ­ci

    Bloody beauty! Great stuff...compelling, like a pandoras box with a smiling guide!

  • @effedupcamel9515
    @effedupcamel9515 Pƙed rokem +17

    Your trapped air is more than likely in the callipers. Try pushing the pads back to move the pistons and re try or even vacuum bleed the brakes. It's also worth noting that on ista it will ask you to press the brake pedal in a sequence or repeatedly during the bleed process. For example when prompted to open the bleed nipple on whatever calliper it will also say press pedal repeatedly or in a sequence.👍