Thanks for the video. It helped me out because the manual I received did not show what yours did. It had "Installation" at top of page and a stick figure with the Kemimoto hanging from the bar. Provided nothing to show how to install as you page did. Kinda odd....
now the small bolts to screw into the slider nuts won't thread in. It's like the bolt is fine thread and nut is course. Weird stuff. I see yours threaded in just fine. I'll get it figured out one way or the other. Thanks again and Merry Christmas to your and yours!
Hello! I think they should work the clamps get pretty tight. If you’re suspending it, it will probably work better than over the top. If not, you could always drill through the center of the clamp and place of screws to hold onto the square tubing. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
That’s a great question. And yes, we have discovered that. Will be connecting it to the bus bar soon to eliminate that problem. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
Unfortunately the factory roof will not fit. We are working on some solutions. We will share an update soon. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
Yes you sure can utilizing the USB Dongle on the side. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
I’m sure there’s a way you could wear it in, but they would require some disassembling. Bluetooth is only for receiving on the ride command. For us, we will most likely just stick with the ride command. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
Unfortunately in that top position, it will not work with the factory roof. However you can mount it on the bottom cross bar behind the seats no problem. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
Yes, by pressing the mode button, you can cycle through different light modes as well as none. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
Good product and great looking lights along with easy install! Excellent sound on a small sound bar 👍
Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
Thanks for the video. It helped me out because the manual I received did not show what yours did. It had "Installation" at top of page and a stick figure with the Kemimoto hanging from the bar. Provided nothing to show how to install as you page did. Kinda odd....
Glad we could help! Merry Christmas!
now the small bolts to screw into the slider nuts won't thread in. It's like the bolt is fine thread and nut is course. Weird stuff. I see yours threaded in just fine. I'll get it figured out one way or the other. Thanks again and Merry Christmas to your and yours!
So did the stock roof go back on?
Unfortunately not. However you can mount it to the lower bar.
It says it needs an inline fuse, 15 amp, u didnt included it, why?
I order the speaker but I have 3/4 square tubing on my golf cart. You think the clamps gonna work on the square tubing?
Hello! I think they should work the clamps get pretty tight. If you’re suspending it, it will probably work better than over the top. If not, you could always drill through the center of the clamp and place of screws to hold onto the square tubing. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
Good video....nice job....will it drain your battery by hooking directly into it?
That’s a great question. And yes, we have discovered that. Will be connecting it to the bus bar soon to eliminate that problem. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
Did you try to see if the roof would fit?
Unfortunately the factory roof will not fit. We are working on some solutions. We will share an update soon. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
Can you play music from a jump drive on it
Yes you sure can utilizing the USB Dongle on the side. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
does it connect to the rzr installed stero?
I’m sure there’s a way you could wear it in, but they would require some disassembling. Bluetooth is only for receiving on the ride command. For us, we will most likely just stick with the ride command. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
I would of put it on the bottom bar, that way you can put the roof on.
Now that’s a great idea. 💡 Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
@@rzr.focused also if you use a review mirror it wount abstract your view. Ps, I found the bumper, took your advice. Next is bar lights
Awesome glad they were able to get you a bumper 😎
Were you able to reattach roof
Unfortunately in that top position, it will not work with the factory roof. However you can mount it on the bottom cross bar behind the seats no problem. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!
Can you keep the lights off
Yes, by pressing the mode button, you can cycle through different light modes as well as none. Thank you for joining us on our adventure! Make sure you like and subscribe. Have a blessed everyday and stay rzr focused!