Kubota BX Flat Tire Solved with TireJect
Vložit
- čas přidán 28. 08. 2024
- In this video, I’ll show you how I used TireJect Tire Sealant to stop my Kubota BX flat tire (front tire). It’s a very easy process, and has been holding air for almost 2 years now (during cold and hot weather). It’s definitely worth doing. 5 stars for TireJect in my opinion, and no more Kubota BX flat tires!
Ready to buy? Use my link below. It gets you something you want (maybe need?), and for no additional cost to you, it helps support my channel! Thanks.
Here is the kit I bought.
TireJect: amzn.to/3aZagVj
#Kubota #KubotaBX #TireJect
Thank you for posting this. My BX2360 does the same thing. Nice job on your clean up, it looks great.
I've got a cub cadet that has a rear tire that leaks also. Gonna give this a shot!
Nice video. You should put your ROPS back on if you are running a loader😉
Thanks for the video, I have the same issue but, only one wheel, left front. It's had some goopi in there for a number of years but, it needs renewal. The tire shop years ago said the tire was just to small for the bead to seal. Would like an inner tube frankly.
Yeah I considered the inter-tube route, but the tireject got such good reviews, I decided to try it. Still holding air a few years later!
@@EvolutionDIY I got lucky with the Rachel strap method & air.
Spray bottle with soap and water spray your tires it will make bubbles where you have a leak
I just flated my B2650 front left tire...but I figure its because I either hit the valve stem on something, or it got a little low on psi and with a lot of weight in the bucket and side hill I might have debeaded.
Chris, great video. What tire pressure gauge and inflator did you use? Thanks.
Used my 30 gallon air compressor and the internal gauge on a Campbell Hausfeld tire gauge I bought awhile back. Just your everyday tire gauge.
After I tried both Slime and the TireJect I had to just put a inner tube, it was either that or a new tire altogether, I am curious how long it lasted for you
Honestly it’s still holding for me, so I must have had a smaller leak than you. That sucks it didn’t work for you.
Hi, just read your comment, could you give the details on that innertube, I've had goop in the wheel for some years and, it's done.
Any idea if this will work in a tire with tube on it?
Probably not. It possible, but not really designed for that. Usually tubes ripe around the stem, or end up with larger tears that won’t seal. You can try it, but will probably be a waste of money. Then you’ll have to deal with the slimy crap when you change the tube anyway 😏.
I have a Kubota BX24 that does the exact same thing... when it sits the front tires go flat... I'm going to try this... any updates? is it still holding good?
@@EvolutionDIY I just ordered some this morning after watching... :)