[Part 7/8] 1NZFE Timing Chain Install and Cover / Echo XB XA Yaris

Sdílet
Vložit
  • čas přidán 29. 11. 2023
  • Pay special attention to the marks on the cam shaft sprockets. The Exhaust sprocket has a spot with 2 dots next to each other and another spot with only 1 dot. The two dots next to each other is the timing mark that should point straight up. Pause the video when needed to take screen shots.
    Some good reading on different types of antifreeze.
    www.machinerylubrication.com/...
    I am going with long life green coolant that is silicate free unlike the old fashion green. This is what I switched to over 10 years ago with my Echo and had zero cooling issues. The Toyota coolant is corrosive to normal silicone so if you want to stick with Toyota coolant you will need the special 1282b silicone which is expensive.
  • Zábava

Komentáře • 19

  • @ralphmcafee9850
    @ralphmcafee9850 Před 7 měsíci +2

    nice work! im building a high compression NA 1nzfe with 1nzfxe pistons and needed some rehearsal for the timing chain, you are by far the best at showing it. 2 thumbs up!

  • @rayamaro9963
    @rayamaro9963 Před 6 měsíci +3

    Very nice job! Nicely done and very meticulous and well explained. But i can't find part #8 . Have you not done that part yet ? . Thanks

  • @whojahbless1560
    @whojahbless1560 Před 5 měsíci +1

    Thanks for sharing.
    Awesome video...

  • @scionnn
    @scionnn Před 7 měsíci

    Thanks for doing my question!

  • @glencarter7331
    @glencarter7331 Před 5 měsíci

    Aligning the oil pump is difficult but you made it look easy!

    • @MakeItMike
      @MakeItMike  Před 5 měsíci

      I did several dry fit practice rounds.

  • @funway820
    @funway820 Před 6 měsíci +1

    just done my 1nzfe full overhual with oversize piston...now more powerful😊

  • @davida871
    @davida871 Před 7 měsíci

    Nice 👍240k on mine runs like a Swiss watch.

  • @thomasthome5558
    @thomasthome5558 Před 6 měsíci

    What ever happened to the seat swap

  • @MARANATA333
    @MARANATA333 Před 3 měsíci

    ???? No gasket behind the water pump plate . I just wandering ?

    • @MakeItMike
      @MakeItMike  Před 3 měsíci

      There is a gasket. It's a metal one

  • @davechambers5387
    @davechambers5387 Před 2 měsíci

    so , what you are saying is to disregard the FSM ??

  • @renebisson7405
    @renebisson7405 Před 7 měsíci

    Where is the EGR valve???

    • @MakeItMike
      @MakeItMike  Před 7 měsíci +1

      Because VVT engines are a little more efficient they don't give them an egr system. At least this is the case with the 1nzfe.

    • @renebisson7405
      @renebisson7405 Před 7 měsíci

      @@MakeItMike Thanks!!!

  • @flyonbyya
    @flyonbyya Před 6 měsíci

    I don’t realize it’s an interference motor