Can We Recover Data From An iPhone Snapped in Two?
Vložit
- čas přidán 2. 04. 2019
- To celebrate 100k subscribers, we are recovering data from a logic board that was snapped in two!
Support our work by sending us a repair, buying supplies or coming for training. www.ipadrehab.com
All the tools and supplies we use in videos are available at www.ipadrehab.store
Jessa’s Equipment Links:
Our thermal camera recommendation:
Seek Compact Pro for Android amzn.to/2J5kkfA
Seek Compact Pro for iOS amzn.to/2RXrF4H
Macro Close Up Lens for SEEK COMPACT PRO THERMAL CAMERA tinyurl.com/5d5mbdmz
›Charging:
USB ammeter: amzn.to/2k2suZN
Bona fide MFI charging cables
Anker: amzn.to/3u3GqIG
Anker USB-C: amzn.to/3KIMbSm
›Microscopy:
Recommended microscope: amzn.to/3IyoBFT
Light ring for microscope: amzn.to/2iRRdOt
Barlow lens: tinyurl.com/4nz4j8x6
›Soldering:
My soldering station with standard iron: amzn.to/2hG656k
Primary soldering tool--mini hot tweezers amzn.to/2hY5DN5
Favorite tips for mini hot tweezer: amzn.to/2iSKF67
Favorite tip for standard iron: BC2 amzn.to/344iWZ2
›Ultrasonic cleaning:
Crest iphone sized cleaner: amzn.to/3qVxO52
Branson EC cleaning fluid: amzn.to/2iSVuFq
›Hot Air:
My hot air station: JBC TE-1QD not available on Amazon, $1500
Recommended station Quick :tinyurl.com/2p8b6487
›Small supplies:
My favorite tweezers--store.ipadrehab.com/Our-favor...
My favorite flux:amzn.to/2iCy5Vm
My favorite solder:amzn.to/2hY1gBA
Kapton tape: amzn.to/2iqxVAY
My blue mat: amzn.to/2jfAiKp
Cutting board I solder on: amzn.to/2kDO0XJ
Low melt alloy:amzn.to/2iqITGB
UV light: tinyurl.com/39kc3he7
›Diagnostic tools:
Tristar tester: tinyurl.com/3573s3yv
DC Power supply: amzn.to/2iRN9hj
Multimeter: Fluke 115 amzn.to/2iqMmou
Fine point tips for multimeter: amzn.to/2iRPjgP
Freeze spray:amzn.to/2iuNZnE
Zxwtool: tinyurl.com/2p86e33y
Storage Repair Case:
Christy’s Favorite for iPad Repair: amzn.to/3KIhQD6
Jessa’s Favorite for iPhone Repair: amzn.to/3qYTgGc
Large Size for iPhone Repair: amzn.to/35m1Gzh
iPad Rehab is a participant in the Amazon Affiliate marketing program and may receive commission for orders placed through above amazon affiliate product links. - Věda a technologie
THANK LOUIS, he sent us all here.
Absolutely
Now to send this link to the guy that said data recovery can't be done
I would spam this to Apple support
The guy that says it can't be done didn't make himself clear.
What he meant to say that HE can't recover data (probably because he doesn't understand electronics.)
Special life lesson for anybody - What can't be done today might be possible tomorrow and what you can't do could possibly be done by someone else.
Can anybody remember that everybody believed the earth is flat, Now only a few stubborn people (Apple) believe that while the rest knows the truth.
@@MsUltrafox The way he worded it though is the problem as he was suggesting that he has 100% knowledge of the situation by presenting half truths when presenting ideas the oppose what he claimed.
He’s an arrogant POS, he’s been arguing with me that Apple wont do a paid repair on a device which has a third party display even after I replied with a Genius Bar work authorisation receipt and screenshots of a chat with apple support telling me that they do. They think they’re Apple employees on there and know more than the company’s actual representatives 😂
J S They think they’re little Caesars. What kind of personality defect makes someone spend all their waking hours on a company’s support site for no money but to get points in order to look cool? Look cool to whom?
Mam it's suraj From India. Following u from last 2 years.. Proud to have Teacher like you.. Hats Off ☺️😊👌
I can't remember how many subs you had when I first started watching but Louis was somewhere around 10~20k. I think it was around the time you posted your first 5s long screw damage video. I just want to say that it's really awesome to see you reaching such a huge milestone. Congratulations on 100k! :)
Thank you!
I'm watching your video thank you very much 🌹
Congratulations on getting 100K. I appreciate your insight for technology.
You can't do this, it isn't possible.
-- Apple Support Tech
It’s not economically feasible, which is pretty much the same thing. It is *definitely* not economically feasible for Apple to offer this service.
@@JasperJanssen It clearly is as there are businesses dedicated to it. But even that is beside the point. People are told on the apple support site, that it's literally impossible, and anyone who says they can do it are scamming you. Clearly, demonstrably, false.
@@JasperJanssen tell me how??! This service is something that Apple should be covering (data recovering) it can happen to everyone. Just imagine you don't have internet to backup your data's and you are in th middle if nowhere
@@JasperJanssen It doesn't matter if it's economically feasible or not. What matters is they say that it cannot be done at all, not even by a third party. Apple can say that THEY can't, or won't do data recovery and that's completely fine. But they shouldn't say that because they're not gonna do it, it cannot be done at all. And then delete everyone who corrects them and says this is in fact possible.
You could easily just desoder a few chips and re solder them on new board
I'm here because of Louis. Simply can't stop watching your videos.
Eye opening. Didn't know such repair/recovery could be done.
oh my god. i'm just a girl sitting in quarantine, knowing absolutely nothing about soldering and repair, but it's so fascinating to watch you doing the thing you love! you are so excited to find smallest parts and fixing them, it's awesome! i'll probably never even hold a soldering iron in my hands, but will definitely keep watching your videos. thanks!
Don't Delay, Buy UV light at IPAD rehab Today!
Congrats on 100k, Jessa! When you get it from CZcams mailed, gotta show off that silver play button plaque!
I heard about you from Louis Rossmann , I am so amazed about the things you are able to do.
ikr, awesome technical chops and staying alive in a business repairing mobile devices, where the customers are even more obnoxious. Also incredible respect to her for cleaning and repairing the bloodphone... ick
Always enjoy and follow both yours and Luis’s feed. Keep up the amazing fight to bring right to repair to end users
Congratulations on hitting 100,000 subscribers Jessa!!!
Awesome! Congratulations on 100k!
As an old (and ex) RC sUAV home builder, I find this video absolutely fascinating. Love your channel, Jessa!
I'm a new member from Belgium. This channel is very interesting to improve my english and also my abilities to repair broken things :)
I have just found this channel and I'm so glad I did. Now its time to book a training session :)
You Gals are AWESOME! Keep up the awesome work and inspiration!
Love your content Jessa :) thank you for all your teachings.
I came here because of Louis video. I stayed because of Jessa's personal warmth, the sense of humor and because for relax I like to watch others doing electronic repairs, even though I make them myself sometimes. :) Instant subscribe. PS. I know from experience interdisciplinary knowledge helps in the most unexpected ways - it just enhances the imagination necessary to even think where to start to analyse the problem. :)
Jessa, I just started watching your videos. I heard of your channel from watching Louis... I just want to say, this stuff is so intriguing. Amazing! Thank you! SUBSCRIBED!
Congratulations on your 100k! It was really inevitable.
Congrats on the 100k Jessa, you're such a legend!
Congrats on 100k Jessa.
you are amazing & an inspiration..you have made an impact..and i respect the work you do..thank you..
I love this channel. mainly for Jes. she is nice and makes me feel good about people.
i hope i never need your services but you are awesome... keep of the great work.. your "style" of communication is wonderful.
I never thought this kind of video would be something that would interest me but I clicked on one of your videos I think it was the title that caught my attention...
Now I'm hooked on your vids..😂
I know nothing about electronics but I love watching the skill at requires to repair these phones, amazing!
You are like a surgeon!
Well I'm now one of your subscribers..
My god, I am very impressive how you repaired this device. I hope one day been close to do that type of things. Thanks for your effort teaching us.
so around 5 days, you got another 5k subs, Grats on the +100k, We are humbled by your presence, Jessa, and Louis !!!!!!!!
Great work and congratulations 100k subs.
Remarkable work. Congratulations. Well done.
Wow congratulations jessa wish you all the best
Congratulations on 100K!!!! Love your teaching technique. Picking up a few SMT tips...I'm no longer afraid of QFN packages ;-)
Congratulations u guys are doing amazing work love that
I had no idea you could hand solder/repair traces that small. Wow. Amazing. Thanks for sharing :)
It's all about shorts and opens :). When I was in the Navy and attending Advanced First Term Avionics our practical tests usually wound up with almost the same type of sequence. Isolate the block by using resistance and voltage analysis. You zero in after that. Honestly though, what I learned in AFTA I took and am able to apply to just about any problem that needs to be solved. I'm a software engineer now and I feel my debugging tasks are better because of that experience. Watching you do the same analysis for board repair just validates that. I came from Louis Rossman's channel and I'm really enjoying the content.
Congrats on the 100k! That iBridge flex cable is pretty neat.
Very nice work, Jessa! I just subscribed today. I was going to subscribe awhile back and I guess I got distracted and then forgot. Oh well, I'm here now.
I am happy to see that you use flux liberally! I have seen people in videos not using flux and it is really hard for me to take them seriously. Thanks for the nice lesson!
A year later and you’re pushing 200k. Well done!
Apple after watching this video:
*This is fake news*
*YOU ARE FAKE NEWS*
i use to repair my old TV's and sound equipment and the odd nokia 5110 lol but my eyes can not focus on small stuff now and i no longer have very steady hands, awesome work i'm shocked in how easy to make it look :)
Is there any way to find local repair techs who have taken your classes? I think it'd be great if you'd publish (with their permission) their names or business.
102K subscribers! Congrats!
Awesome work!
Wow.... KiltedTim has made 9 CZcams accounts just to dislike Jessa's videos....
He's up to 25 now lol
I do not understand why wankers downvote the video. If they don't like them then just close the window and move on. Small minds even smaller......... 😲
Wow! I fixed this same issue in PBRS 2 years ago. Jessa and Mark told me to just scrape the board where it was broken so that none of the layers touched each other and after 35 min of scraping it worked! It was literally broken in the same spot!
What a great channel. I definitely learned a lot and subbed. Thank you!
Louis helped me fix my Mac Book Pro (2011 the cap) turned me on to micro stuff. Love the channel you seem to be really buzzing. OL on multimeter is Out of Limit you will get OL if you are on wrong resistance range doesn't mean it's open loop
why you are so happy and excited throughout the video.
Compared to Rossmann, that chroma-key setup is more than enough of an upgrade!
Give him a break; he's single.
I like seeing the shop background. I think Louis even asked his audience about this about a year back.
@@rkan2 I don't mind, but it's not like I'm looking at it while hes also working on a board. Might as well make it so he can be neatly cropped in to the sea of flux
CONGRATS ON 100K
Sub'd and notified , 108k subs congratulations. love your work and fun to watch over your shoulder.
Love these old school editing.
Some of the stuff you did there blows my mind! Freaking crazy interesting
Congrats!!!
The Siglent supply on your bench has on screen capability .
Jessa, you're very good at what you do. You're also a nerd... That's why I want to do this work too.
Thanks for the uv light trick. I had no idea!
Great job love the video I love your personality in the way you explain things. not sure how I ended up on the video but like it anyways and I'll keep you in mind if I ever hear someone trashing their iPhone
Congratulations on reaching then 100K mark on subscribers. Keep up the good work and keep politely sticking it to Apple.
Thanks Paul :)
She's not really sticking it to Apple because she still recommends to replace the phone. She's just helping normal people get their data 😀.
I think the screw bracket is actually technically a screw boss. Great work Jessa!
Excellent - Thanks for making
100k already congrats
You go girl.
In my experience with micro controllers and various logic level ICs, Reset and Enable pins (usually labeled as RST and EN) are usually triggered by pulling the pin high or low. In this case I would have simply tried connecting pin 32 to ground and booting the phone to test. If that didn't work, I would have injected .5 or 1 Volt to the pin. Enable and Reset functions are never connected to a data line and since the APU is not on the line there is no chance to damage it. Let me know if you think this makes sense. Love your videos. Cheers!
well done! love your humour!
amazing work
Awesome job,
Damn. This is incredible work
Dang…! that was tiny traces to solder…You are awesome !!
Truly amazing!
Not knowing where the memory for the photos is stored or how it is stored I'll ask this question: could you simply remove the chip (or chips) where the memory resides and solder it (or them) into a working iphone circuit board?
This is why every phone I buy I make sure has a memory card slot so I never have to worry about the phone dying.
Just subscribed think your videos are amazing,keep it up 👍
Wooo!!!!! Congratulations!!! You are very unique and special. Keep exposing Apple!
Nice vid. What about using a normal wired PC mouse to bypass the touch-screen?
I had to repair Samsung S8 with a broken screen and touch-screen function. While I was waiting for the new digitizer to arrive I had to recover the data with the broken condition.
So, using an OTG connector and normal wired PC mouse you can control the phone as if you using only one finger.
If the phone had bluetooth enabled, would you be able to do the Trust step using an external keyboard?
Great Job and Congrats on ur 100k subs,
I've also been over to the Apple support discussion and upvoted the comments recommending your and Louis' repairs. It's up to all of the subs of you and Louis to continue to promote and upvote your services on the Apple discussion. This would be great if it then went to court and they are shown to be deleting what 100's or 1000's of people are saying is a solution :)
C'mon everybody, peruse the Apple discussion, search for 'damaged iPhone data recovery' and suggest the user google, or suggest Jessa's or Louis' services. And upvote anyone suggesting their services so it becomes the most popular response.
That was awesome.
Good explained jessa thanks from algeria
Very cool!!!
Do you use a thermal camera?
Yes, so cool and amazing!!!
My iPhone 6 not power on! No short circuit! When I press Power switch its show reading on power supply .vc 16. After replacing pm ic phone powered for 1 day and and shutdown again! Any suggestions mam?
For holding random items like the uv light, get one of the articulating arm camera mounts with the clamp on one end. Buy a second clamp to put on the other end. Now you have the worlds most useful third, fourth, fifth, ... hand.
I have an iPad that is smashed and has a few pictures and videos of a loved one. It won’t even turn on. Is there any hope?
@27:22 'You have to have touch in order to be able to enter the passcode and click 'Trust''-- Next Level Mom Philosophy right here!
dude you're amazing
Amazing repair of touch and congratulation on 100K subs!
Wow..... great work.. good to know that we can fix this crap..
Good Job, really interesting
Beautiful video 👍👋
Like the saying when there is a will there is a way, question is when does it become cost efective, in the case of data recovery of course the data may be invaluable..
Just curios, in this part of Europe mac products are not that common... Too expensive for what they offer... Was there an option to hook up a mouse to get the pin in? I did that trick on android devices with the touch damaged. Just curious😁 oh, and great video.
Can you help me? My iphone 6 is broken and I want to get all of my data back but I dont know how. The LCD has a grey and white strip that goes vertically down the center. And the iphone boots up and turns off after a little bit. This is repeated until i turn off the phone by holding the power button. Can you help? I would take it to a specialist but I really dont have that much money
How about wire it through a switch and operate the digitiser reset line manually. Maybe that would make it start up.
100371 subscribers congratulations 😊😁👍
u deserve,
greetings from brazil
What about manually injecting the reset signal instead of trying to solder to the trace? It might come alive if you force the reset signal.