ROYAL ENFIELD CLASSIC 350 CARBURETOR TUNING FOR VIBRATION REDUCTION AND MILEAGE

ROYAL ENFIELD CARBURETOR TUNING TUTORIAL( CARBURETOR AIR-FUEL SCREW ADJUSTING FOR BETTER MILEAGE ,BETTER PERFORMANCE AND VIBRATION REDUCTION.)
PLEASE NOTE TIGHTENING THE SCREW WILL INCREASE FUEL AND DECREASING AIR(RICH MIXTURE), LOOSENING THE SCREW WILL DECREASING FUEL AND INCREASING AIR(LEAN MIXTURE).
SO TUNE YOUR CARBURETOR AIR-FUEL SCREW TO GET MAXIMUM RPM.

[@akshayrajkr]

No effort will be wasted. keep going. Very good presentation.

[@MECHANICJO]

THANK YOU

[@user-jg8fb6kp9i]

​​@@MECHANICJOhi bro contact number tharumo please help, MIDHUN enn anu ante name

[@praveelprasad3943]

Very perfect presentation jomin.. keep it up and waiting for next useful videos..

[@MECHANICJO]

THANK YOU DA

[@hasbullamagomedov6520]

Bro nice video.. i have std 350 when i rides it like 80 kmph it's vibrates alot and smell of engine oil burning cames when i stopped the bike..and on higher speeds it's feel like bike want 6 gear at the speed of 80 plus .. i had tuned carburettor through royalEnfield after that this is happening to me.. suggest good setting for this brother.. lots of love from punjab..

[@vishnumuraleedharan5672]

💓

[@vishnumadhukuttan7090]

Superb da

[@MECHANICJO]

THANK YOU

[@shinoytj3795]

AF screw oru 3.5 turns anti clock thirichitundaville ippol ?

[@ratheesh4865]

Meter engane aanenu connect cheyyendathu ennu koodi parayendathayirunnu bro

[@sreethulip1859]

Air ala brother, fuel aaanu screw il adjust cheyunath.

[@joelsiju3850]

What's the milage u get after tunning?

[@josnasoasis7839]

Super

[@MECHANICJO]

THANK YOU

[@nizammuhammad5208]

Work shop evideya ?

[@wanderlustboy6834]

bullet standardil same ratio aano? tight chytat 2.5 loose chytha matram matyo.. ennt max rpm set aakno ath koodand..

[@MECHANICJO]

Yes maximum rpm kittunnathe varea try cheyyanam- without variation... before starting process just heat up engine to a normal working temperature(please dont over heat the engine)

[@ananthum9486]

Better tuning il ahnenki Load gear il irakam irangumpo silencer pottunna sound kellkuo

[@MECHANICJO]

ട്യൂണിങ് കറക്റ്റ് അല്ലെങ്കിൽ അതായത് പെട്രോൾ അളവ് കൂടുതൽ ആണെങ്കിൽ സൈലെന്സറില് നിന്ന് പൊട്ടൽ സൗണ്ട് കേൾക്കും.

[@mystylemedia1363]

Chetta classic 350 kk 500 nte carburetor fit cheyyamo

[@adithyankg5718]

Cheyan pattum

[@jobinjoseph9071]

Super bro 👌👌✌️

[@MECHANICJO]

THANK YOU

[@manavtalreja4324]

How many turn anti clockwise from full tight

[@MECHANICJO]

From 2.5 to 3

[@MECHANICJO]

Use a digital tachometer and check for rpm variations. Set the screw when you get higher rpm without any variations

[@abhirajjayan2989]

Tachometr engineya connect cheyya??

[@sreekanthd5450]

Taco മീറ്റർ എവിടെ ആണ് കണക്ട് ചെയുന്നത് പ്ലഗിൽ എന്ന് പറഞ്ഞു 2ടെർമിനലും കറക്റ്റ് എവിടെ ആണ് കണക്ട് ചെയേണ്ടത് എന്ന് പറയാമോ മീറ്ററിന് എന്ത് വില വരും

[@sreekanthd5450]

ഞാൻ sound നോക്കി ട്യൂൺ ചെയ്തപ്പോൾ ഒന്നേമുക്കാൽ പിരിയിൽ ആണ് ഓരോ വണ്ടിക്കും വ്യത്യാസം വരുമോ

[@shinoytj3795]

Bs4 standard bullet 2018 modelinum ee same patten thanne aano?

[@MECHANICJO]

Bullet standard turn 2.5 turns anticlockwise from full tighting... then adjust clockwise or anticlockwise slightly by checking the rpm meter. IF you get higher rpm without any variation fix that point. That is the best tuning... Remember before srarting tuning process 1) Clean air filter 2) Slightly warm up the engine

[@shinoytj3795]

@@MECHANICJO 2 full turn il aanu enik rpm kooduthal kitunnath.. pinneedu anticlockwise thirikumbol rpm kurayunnu..

[@MECHANICJO]

Ok set that point and check for any variations or missfiring

[@shinoytj3795]

@@MECHANICJO tuning cheyumbol rpm etra vare kootti idam ????

[@MECHANICJO]

@@shinoytj3795 Rpm oru 1000- 1200 set cheytha mathi orupade kooti ittal engine over heat aakum, so tuning correct kittilla

[@solo_rider718]

Bro full tight aakiyittum vandi off aakunnilla

[@solo_rider718]

Leak engane aan arya

[@theskid7942]

Acceleration cut akbo rpm melle down avan reason ennatha

[@sreethulip1859]

Carburator nde idling screw stuck varum. Azikan kitatha avastha. Akathe holes block ayath clean cheyan patyla. Angne varumbol accelerator cut ayalum rpm kurayan delay varum

[@trapmuziccid2822]

,,👍👍👍👍👍👍👍👍👍👍👍👍

[@MECHANICJO]

THANK YOU

[@aaronthomas8550]

Super

[@MECHANICJO]

THANK YOU