MINI BIKE ! ( 80 to 212cc )
Vložit
- čas přidán 15. 10. 2019
- We put a bigger motor in the mini bike its way faster ! just tweaking out some problems with it to get more power and for it to run properly part 2 will be out soon !
Follow my Social media
instagram: @Miller.films
Snapchat: /Millerfilms
Twitter: @Millerxfilms - Zábava
adjust the idle screw to keep it running without throttle
I just grinded the drain plug on my 212 down flat to make it fit. The engine has two plugs and you don’t need both. No need to sacrifice the structural integrity of the frame of you don’t have to.
How can I grinde the drain plug down
@@og335 with a grinder, dremel, or filar
if i get one stock mini bike will it be fast 40-50? or it’s not worth even getting it
@@aronmontes9697 the stock 3 horse will never run over 20 without serious modification your best beat if it were me is to pull the motor don't by a predator buy a tillotson 212 hemi $235 buck to your door it will be better then a stock predator and even mop the floor with a stage 2 and if you ever want to add on to the tillotson it will always be better then a predator but if that's something you don't want to do and go threw I would suggest a Coleman bt200x it's a lot better bike and easier to modify being your first bike or so speeds your wanting is doable but your going to need a higher rpm motor at least 5800 rpm a torque converter with at least an 11 tooth can still use jackshaft or clutch upgrade and a 53 toothed rear sprocket
A stock tillotson will not wipe the floor with a stage 2
It's the same as a stage one kit on a predator the I agree that they're better and a much better upgrade path but the only differences is flywheel valve springs higher flowing intake and exhaust and a reinforced block
2 pieces of steel under the mounting holes would have brought the motor up enough to clear the drain plug.
They make a motor mount for them that way you dont have to drill or weld anything. It's on a tilt so that preditor 212 will fit perfectly
Does it bolt to the existing mounting plate? Where do you get it?
Where is it sold?
@@tmnfishing9417 gopowersports
@@jamessouthworth1699 gopowersports
u have to take gas tank off
The scrape 😂😂😂
You're brave bro.. I never 212 in sandles
You can just grind the bolt on the 212 there is another bolt behind the engine for draining oil so you really don't need the front one
How long was the chain you put on it
Where can you get a clutch that'll git the original chain? Tractor supply?
Amazon
You have too let it run for about 15 too 20 minutes so the gas and the oil can circulate
The gas valve was beyond on
Wow amzing confpgrats
Thank you !
Does anyone know what specific chain it has, I need it rlly bad, mines broke and ordered 2 but they were too small. Pls someone help me find it!!🙏
size 35 lawn mower chain is what i use for mine
this looks like a place in indiana.... close to the famous hill climb???? i have the same mini bike can't wait to do this !!!!
what engine is that?
My predator backfired when I was pulling the me starter does anyone no why that happens?
Your valves need to be relashed. Your intake valve is not opening all the way and your getting too much back pressure because the motor is not decompressing. Feeler gauge to .003 exhaust and .002 intake.
Wow I’ve seen you comment on cars and cameras videos but mine does that to
Devon Fretwell haha that’s cool that you’ve seen me before lol
needs new piston rings and gasket
@@demekamitchell8338 its a brand new 212 lol i saw the box on the ground in the vid
You could’ve just grinded the drain bolt
Same
Bro could have just cut the oil plug lmao
Why didn't you just grind the footpeg bar off and ree weld it on the front of the mini bike
They didnt even need to cut it, you just put the motor on spacers so it sits above that bar, ive done 2 like this without any frame mods anf they work great
You gotta put the 212 on like 5/8 inch spacers
Bro you dont have to cut that
Looking to this exact swap sometime this month
how did it turn out
LBR = low budget racing lol JK...good video
I don’t think you guys broke in the engine that is why it smokes and you have to give it gas right away
should have done your homework before doing your final project
Needs some performance parts now
Not Important yeah man ! Some street tires too lol
You have a minibike
@@KingTmafia like 4 lol
Y'all need one of these czcams.com/video/NhFFKL1laAc/video.html . I put this on a Baja Dirt Bug and it was a total death wish. The bike now has a stock Predator 212 with a zip tie hack. I hit 45 and backed out because the brake was doing absolutely nothing. That Gx160 snapped 2 chains and finding traction under hard acceleration proved to be futile at best. I swapped it out before some got seriously hurt or worse (like dinging up a $400 race motor🙄).
It would have worked better only thing you had to do is drill new holes but put the engine on while the clutch is on backwards with the chain on then drill the holes you wouldn't have to cut nothing that's what I did it works fine
$4 piece of 1 inch square tube and 2 bucks worth of bolts people love to hack stuff