If you are lucky you only had the carbon brushes pair get burnt and can use the wall chaser after replacing them, worst case you have a blown motor. Tip for the Wall chaser of any kind you may try to use:- Your dust collector isn't strong enough to keep up with the wall chaser there is way too much dust for your dust collector to collect, so do your Wall chaser slot-cutting in two passes about half of your final intended depth for all the cuts you want on the walls. Then take a second final pass with the full depth that you want on all of your walls, this way you can get through your work faster without overwhelming your wall chasers motor your Dust Collectors dust collection. Taking two passes will also allow you to see where the Wall chaser slots will look like from one point to another and make any changes if you find necessary. The dust from the Wall chaser cutting might have gotten sucked into the motor causing it to burn up completely and blow itself up in flames. You can check both the brushes from the screwed black access covers on both sides of the wall chaser. Well if the wall chasher is a lost cause then hope you have your warranty on the product still claimable after your power cord cutting.
Habe sie 1 Tag genutzt. Habe sie sehr vorsichtig und zärtich behandelt. Sie hat 4x2m Schlitze in Rot Klinker gut geschlitzt. Eher was für den Privatgebrauch. würde sie wieder kaufenä.
If you are lucky you only had the carbon brushes pair get burnt and can use the wall chaser after replacing them, worst case you have a blown motor.
Tip for the Wall chaser of any kind you may try to use:- Your dust collector isn't strong enough to keep up with the wall chaser there is way too much dust for your dust collector to collect, so do your Wall chaser slot-cutting in two passes about half of your final intended depth for all the cuts you want on the walls.
Then take a second final pass with the full depth that you want on all of your walls, this way you can get through your work faster without overwhelming your wall chasers motor your Dust Collectors dust collection.
Taking two passes will also allow you to see where the Wall chaser slots will look like from one point to another and make any changes if you find necessary.
The dust from the Wall chaser cutting might have gotten sucked into the motor causing it to burn up completely and blow itself up in flames.
You can check both the brushes from the screwed black access covers on both sides of the wall chaser.
Well if the wall chasher is a lost cause then hope you have your warranty on the product still claimable after your power cord cutting.
Why did you cut the cord? You have a 3yr warranty on it.
Habe sie 1 Tag genutzt. Habe sie sehr vorsichtig und zärtich behandelt. Sie hat 4x2m Schlitze in Rot Klinker gut geschlitzt. Eher was für den Privatgebrauch. würde sie wieder kaufenä.
same problem here after one wall chased :(
In the last part of video seems you push the wall chaser instead to pull like they say in the instruction. Maybe thats becauee broke?
Why tf does it spins the other way?
How can you work with that?
Ja meine hat sich auch mit weißen Funken verabschiedet 💥
इसका प्राइसक्या है
Parking side 😅
😂😂
most likely ball bearing fault. still unfortunate that it didn't last even for one full job.
Same Problem. Parkside send me new one. But i would not recommend this Wal Chaser.
nice
Good
Eso lo hago más rápido con la radial
Sen yanlis kullandin kesmekleri ters yaptin onu zorladin
Parkside 😂😂😂
I hate this brand Parkside
Most of their Produkts are Garbage
BAD QUALITY!!!
중국회사인가요?
내구성이 매우 안좋네요
意思是你们韩国手机不会爆炸？没有几个中国人会买你们的产品
Germany