Thank God it uses timing chain instead of the rubber timing belt. Imagine the pain of removing those screw and cable every 50k km just to replace a worn belt.
Great video, I took the phasers off my M274 engine ( same setup) but my question I could not find any pin to align the cam shaft with the VVT sprocket . So basically sprocket ( phraser) not locked I to the camshaft. Any advise? Thanks
@@benz240d I know. I wonder what the labor times are like between the Mercedes and the Infiniti (Japanese makes typically don’t pay as well as German makes).
@@ronjohnson8119 believe it or not, I could not locate a head gasket set from infinity, so I ended up ordering it from mercedes. Labor way higher then Japanese. Same setup and everything, But pays differently.
With the cams 'pinned' at TDC/O|T, can you rotate the crankshaft through the full rotations necessary to feed a new timing chain through without hitting the valves?
this engine looks new and wants a chain and cams . not as good as the old mercs . please bring back the douplex chains they are more reliable . bmw and mercs are going backwards with the design of their engines . did i miss something i did not see the chain being replaced ?. i have realised that this engine did not want cams or chain and just only to show you how it is done ,
yes, and NEXT time please NO slow motion, show us the bolts, and how to get the covers, etc off, they don't FLY OFF by themselves as you show here!!!, and PLEASE either ENGLISH, OR german NOT both over-speaking each other, rather annoying to say the least!!
Super je suis en train de chercher de travail de mécanique chaque fois j'ai vu ton vidéo je regarde ça me plaît beaucoup s'il te plaît si tu as eu mon message réponds-moi moi je suis en Italie s'il vous plaît
A bit weird as he don't change the timing chain? used to do the V8's with a split link timing chain and just turn the engine manually and change tensioner job done. Why take the camshafts out? Also the workshop looks a bit cramped not like a typical garage workshop :-) this is not reality
Better to record one in English and a separate video in another language- Make to videos. Use the same video recording, just add voiceover because the mechanic does not talk... so come on, do this right if u really want to help and educate people
Мастер отличный, я бы научился всему в тех центре акубис, ясам мастер но с большим удовольствием научился всему
thanks for great video. but english and german commentary on top of each other? can´t understand either!
Thanks a lot world engineers for the valuable hints.
Huge operation.
Nice infomation thanks 👌
a good time of day. Thank you for the video. could you show how to put the camshafts on a Mercedes CAL 250 motor 270920
That’s what this is
Great video
The best engineers in the world!
U mean the most corrupt? Dieselgate
Thank God it uses timing chain instead of the rubber timing belt. Imagine the pain of removing those screw and cable every 50k km just to replace a worn belt.
Bravo pour ton travail
Really good video. thank you.
Great video,
I took the phasers off my M274 engine ( same setup) but my question I could not find any pin to align the cam shaft with the VVT sprocket .
So basically sprocket ( phraser) not locked I to the camshaft. Any advise?
Thanks
Hi, did you find out how to put the sprocket back? It has some marks in the back, which one is the right one?
The cams are aligned with the special tool and the actuators are simply held by friction. This is one of the worst engines ever built.
@@ronjohnson8119 I'm doing a head gasket on 2018 infinity gx30 and it's the same engine. Mercedes is selling this garbage to infinity now.
@@benz240d I know. I wonder what the labor times are like between the Mercedes and the Infiniti (Japanese makes typically don’t pay as well as German makes).
@@ronjohnson8119 believe it or not, I could not locate a head gasket set from infinity, so I ended up ordering it from mercedes.
Labor way higher then Japanese. Same setup and everything, But pays differently.
With the cams 'pinned' at TDC/O|T, can you rotate the crankshaft through the full rotations necessary to feed a new timing chain through without hitting the valves?
All that and the old timing chain was reused lmao great repair
Good!
this engine looks new and wants a chain and cams . not as good as the old mercs . please bring back the douplex chains they are more reliable . bmw and mercs are going backwards with the design of their engines . did i miss something i did not see the chain being replaced ?. i have realised that this engine did not want cams or chain and just only to show you how it is done ,
It`s to reduce friction and save fuel, all because of that gas of life CO2.
who makes that awesome car lift? also who sells that fender cover? if anyone knows please inform me. thanks
Nice job Mercedes next time replace piston and crank.
yes, and NEXT time please NO slow motion, show us the bolts, and how to get the covers, etc off, they don't FLY OFF by themselves as you show here!!!, and PLEASE either ENGLISH, OR german NOT both over-speaking each other, rather annoying to say the least!!
U are genius
Super je suis en train de chercher de travail de mécanique chaque fois j'ai vu ton vidéo je regarde ça me plaît beaucoup s'il te plaît si tu as eu mon message réponds-moi moi je suis en Italie s'il vous plaît
Very good and helpful
and where is here timing chain replacement???
Am also confused
Are you blind?
13:44
@@VinceLukeSolo blind are you. Where is here timing chain changing?
How much you changed him
Very good
The guy was too serious for a work done without actually replacing the timing chain.
yeah replacing cam adjusters are easy :D
Como se bloque el crankshaft
Secure loose chain with HAMMER :)
just remove the camshaft and put back again, didn't even remove the crank pulley and the lower timing cover to replace the timing chain
When the camshaft & timing chain should be replaced for this engine ?
how many km has the car driven since the camshaft needs to be replaced? and how do you know it's broken?
great video, but i did not see you replace the chain, i would like to replace mine
Are you blind?
13:44
Hello its 1.6 turbo 122ch ?
Почему цепь не поменял?
Thank you, Engineer, for the valuable information, but if you put an example in English
A bit weird as he don't change the timing chain? used to do the V8's with a split link timing chain and just turn the engine manually and change tensioner job done. Why take the camshafts out? Also the workshop looks a bit cramped not like a typical garage workshop :-) this is not reality
Русскоязычная версия у меня на канале )
How much does the chain last ?
I live in India and do car work, will you keep
Porque eso ba bien exato
Is this the 1.6?
1.6 turbo
What king of car lift it's that anyone?
how many miles/km on engine
hi please i want ask you when i start my car i listen a noise that makes " tac tac tac " not successive . whats the problem ?
Check oil pump to supply oil on top of engine
This video is from AKUBIS
M 274 camshaft & timing Replacement plug in hybrid
Dove si trova corpo farfalla mercedes benz viano 2012 motore 2.2
What will a lot of overlap affect?
+PCGamer UK what do you mean
Those dang t bolts
Hi there, this videos isn't working but I need it desperately, is there any chance you can send it to me? Thanks
Hello! You found this video? I need this too.
Sir what is the part no. Of timing tool?
How often we should change chain and other elements?
8yrs check, 200 000 km chain replacement
Estou fazendo a troca dos guias da corrente uma a200 aqui no Brasil com apenas 90 mil kms. Trabalho do cão 😞
@@robertinhoxj6brasil156só para os guias se faz super facil
Can somebody plz tell me what he says at 19:31?
Is this 1.6 motor 156 hk?
Exatamente turbo
Which models use a re badged Renault engine??
Die deutsche Übersetzung ist genau so laut wie das Original. Das ist zum verrückt werden.
Never see timing chain replacement.😂
Prefiero tener una bicicleta...
i just replaced my transmission, had to take motor out. So anyone needs help, please contact me. wish i had done chain the same time :(
No wonder they charge an arm and a leg 😂
Nothing was tight on that jerry
20:20
Esto ya no es un mercedes de verdad
Magazine technician
enfuego blasophere......fangala mu chaka! chow chow......walla alaggga bupapaoil, dinga stankalls, chang. interesting.
shit...errase the german language or lower the volume it confusing listening both
It's not a ml 270
А где замена цепи то
Так тут банальная замена валов,а про цепь видно в другой серии.
Super je suis en train de chercher le travail de mécanique s'il te plaît Cydia Russie message réponds-moi s'il vous plaît moi je suis en Italie
(Y)
Better to record one in English and a separate video in another language- Make to videos. Use the same video recording, just add voiceover because the mechanic does not talk... so come on, do this right if u really want to help and educate people
Over engineer at its best, buy Toyota
Ga dam well im never buying a german car fuck that. I love my honda civic 😂
Hi sir aap ka number chahi
CLA
I’m so not looking forward to doing this
I’m so sorry you have to do this job lol
junk
What an absolute piece of garbage engine. Mercedes really should be ashamed.
Had.pain.nawo
a good time of day. Thank you for the video. could you show how to put the camshafts on a Mercedes CLA 250 motor 270920
It's the same engine shown in the video.