There is a very fine line between low quality and high quality when it comes to headlights. Can you find LED units for $200/$300? Absolutely, but those Chinese headlight manufactueres DO NOT care about performance or reliability! However companies that do care about reliability and performance are going to take time engineering their product - which ends up costing more money.
Average Joe? I’m almost 40 and find seeing at night and weather is important and cost doesn’t matter. Same people worried about $500 on headlights spends money on junk they don’t need…
The person does have a valid point. The best thing you can do is either leave OEM’s put and just do a bulb upgrade (and be happy with results) or be willing to spend top dollar
Would I be wrong for assuming this is a re-upload? By the way, still waiting for a solid comparison of the SV-4, 2Stroke 3.0, etc. against proper competition like DDM Tuning Accu V2 Pro, Katana, etc.
During these tough times is it wrong to think I should buy a $50 headlight that provides great light for me but blinds others , rather then a $500 morimoto headlight that's good for all lol
I don't know if they are biased or don't have the lights wired up right. the xprite style ones they only had the DRL as the low beams. not actually the led low beams or high beams. The slits at the top arnt the low beams the leds in the middle that are not on are. !
So to be clear the Holley RetroBrights will work plug and play in a JK? I ask because I have not seen them mentioned anywhere else for JK's. Also Holley's own website does not mention this light as an option for the Jeep JK.
I want a headlight for my TJ that shines like the ones in my Tundra. Low beam lights up the darkest wet road without blinding on comers. High beams light up the whole road all the way to the next town.
I don't know what aftermarket headlights I have... but everyone thinks I have my brights on...when they flash me, I turn the brights on and make em really mad😅
I live in southern Alberta Canada. I drive long wide straight stretches on Hwy 4 to the US border. I also drive in Montana on interstate 15, I need to light up the ditches and the road in front because deer. I want a cut offline for in town low beam but brilliant wide spread high beam. Any suggestions?
So my question is about the KC Highlight Gravity Pros, The Manufacturer site states that they probably wont work on with the "Angry Eye" Grill. Is this true or does it require slight modification to the angry eye grill?
They tested it in the original video 10 month ago, it's one of the best but the Morimoto Super 7 2.0 is still significantly better (at 5:30) : czcams.com/video/ekMpdKfLlMQ/video.html&ab_channel=HeadlightRevolution This Morimoto really is the one to choose, it's the only one that matches if not exceed the performance of an HID setup. All the other will be outperformed by a good HID setup...
(subbed) would you guys know what headlights used on Hobbs and Shaw cars: Range Rover, MAN KAT1, Rock Crawler - here's a clip from the movie - czcams.com/video/DbNjTUWjHug/video.html thanks and more power!
You need to make a video on LED headlights that you get a bang for your buck . The average joe is not going to spend $500/$600 on headlights .
Exactly
There is a very fine line between low quality and high quality when it comes to headlights. Can you find LED units for $200/$300? Absolutely, but those Chinese headlight manufactueres DO NOT care about performance or reliability! However companies that do care about reliability and performance are going to take time engineering their product - which ends up costing more money.
Average Joe? I’m almost 40 and find seeing at night and weather is important and cost doesn’t matter. Same people worried about $500 on headlights spends money on junk they don’t need…
The person does have a valid point. The best thing you can do is either leave OEM’s put and just do a bulb upgrade (and be happy with results) or be willing to spend top dollar
Anyone who spends that kind of dough has a lot more money than brains. If I was a billionaire I wouldn't spend that for a headlight.
Would I be wrong for assuming this is a re-upload?
By the way, still waiting for a solid comparison of the SV-4, 2Stroke 3.0, etc. against proper competition like DDM Tuning Accu V2 Pro, Katana, etc.
Gotta love the Tavor ... nice work my friend. Shoot shit that sucks! 19:12
Any options for an empty headlight shell with replacable led lightbulbs?
During these tough times is it wrong to think I should buy a $50 headlight that provides great light for me but blinds others , rather then a $500 morimoto headlight that's good for all lol
It's never good to blind other drivers, especially if you know you're blinding them. It would be different if you didn't know any better!
I don't know if they are biased or don't have the lights wired up right. the xprite style ones they only had the DRL as the low beams. not actually the led low beams or high beams. The slits at the top arnt the low beams the leds in the middle that are not on are. !
So to be clear the Holley RetroBrights will work plug and play in a JK? I ask because I have not seen them mentioned anywhere else for JK's. Also Holley's own website does not mention this light as an option for the Jeep JK.
It looks like you need an adapter for the wiring
Nice to meet you.
Is it possible to install kc hilites projector on chevolet c10?
I'm having trouble finding information on this in Japan...
I want a headlight for my TJ that shines like the ones in my Tundra. Low beam lights up the darkest wet road without blinding on comers. High beams light up the whole road all the way to the next town.
Check out the Super7 headlights! www.headlightrevolution.com/morimoto-super7-jeep-wrangler-led-headlights-LF275-B_2?quantity=1
@@HeadlightRevolution they don't show to fit a TJ
I have the Gravity Pros on my LJ. Just had to use a wiring adapter.
I don't know what aftermarket headlights I have... but everyone thinks I have my brights on...when they flash me, I turn the brights on and make em really mad😅
Might need to check your headlight alignment 👀
@@HeadlightRevolutionThat’s what I was thinking. 😅
I live in southern Alberta Canada. I drive long wide straight stretches on Hwy 4 to the US border. I also drive in Montana on interstate 15, I need to light up the ditches and the road in front because deer. I want a cut offline for in town low beam but brilliant wide spread high beam. Any suggestions?
Super7!
So my question is about the KC Highlight Gravity Pros, The Manufacturer site states that they probably wont work on with the "Angry Eye" Grill. Is this true or does it require slight modification to the angry eye grill?
We haven't verified with an angry eye grill, so we would probably trust what KC has on their website!
Chris, you sound angry. Rightly so! 😆😆😆
Procomp? I just scanned through but didn't see it.
Haven't tested yet, but it is on the list for this year!
will these work with a more aggressive "mean eye" grille?
throw that ugly grille away
@@hatecoach2996 wife's
How weird is it that all Jeep owners are also Tavor owners?
what size morimoto profile halos do you have/need for the Morimoto super7?
Please reach out to customer service for this information!
218-755-5200
Sales@HeadlightRevolution.com
Do comparison of the demon eye lights
Maybe!
Sure, the Morimoto's look great, but there is no way I can spend $800 on headlights.
They’re trash! I’ve had them for 2 years and I’m on my third replacement, their customer service isn’t great either. Stay away from Morimoto
great video
Thank you!
Dude i wanna know what set up y'all are running on that black Wrangler you keep showing! That thing is SICK!
Good vid 👌
How do the OEM Jeep LED headlights lights compare?
They tested it in the original video 10 month ago, it's one of the best but the Morimoto Super 7 2.0 is still significantly better (at 5:30) :
czcams.com/video/ekMpdKfLlMQ/video.html&ab_channel=HeadlightRevolution
This Morimoto really is the one to choose, it's the only one that matches if not exceed the performance of an HID setup. All the other will be outperformed by a good HID setup...
we need morimoto lamp xenon 7500k not only 6500k
7500k is next to useless. You lose so much overall light output with the blue color.
@@HeadlightRevolution
I don't like 6500k due to white with yellow colour i need white pure or little blue with 55watt xenon
@@tomytimo6343 Morimoto 5800k XB50 ? They're made for 50W ballasts.
@@dufonrafal
I try 6500k still little yellow so i recommed 7000k or 7500k will be better to avoid any yellow colour with 50 watt xenon
@@tomytimo6343 6500k is blue and 7500k is purple.
The XB50 5800k is rated for 5800k at 50w and that's blue. Other bulbs are rated at 35W.
lol, "this one will make you crash." 🤣
Right into the ditch, bye bye 👋🏻
Most of the people don't have any idea about setting their lights correctly.
(subbed) would you guys know what headlights used on Hobbs and Shaw cars: Range Rover, MAN KAT1, Rock Crawler - here's a clip from the movie - czcams.com/video/DbNjTUWjHug/video.html thanks and more power!
The KC is trash what you mean 😂
🤫