How to change wc to commode

Sdílet
Vložit
  • čas přidán 18. 09. 2023
  • How to change wc to commode
    Commode Twilt Fitingdo and finish the old w c The use of wc is very rare in today's era The kimod's markit has a lot of variety as weston commode
    Changing a WC (water closet) to a commode typically involves replacing the traditional toilet with a more comfortable or specialized seat, often for accessibility or convenience reasons. Here are the general steps you would follow:
    1. **Choose the Right Commode**:
    - Determine the type of commode you need (e.g., standard, raised, with arms, portable).
    - Ensure it fits the dimensions and plumbing setup of your current WC.
    2. **Gather Tools and Materials**:
    - Wrench set
    - Screwdriver
    - Putty knife
    - Towels or sponge (for cleanup)
    - New wax ring (for sealing the base)
    - Plumber's tape
    3. **Turn Off the Water Supply**:
    - Locate the shut-off valve behind the toilet and turn it clockwise to close.
    - Flush the toilet to drain the water from the tank and bowl.
    - Use a sponge or towel to remove any remaining water.
    4. **Disconnect the Existing Toilet**:
    - Disconnect the water supply line from the bottom of the toilet tank.
    - Remove the caps covering the bolts at the base of the toilet.
    - Use a wrench to unscrew the nuts and bolts securing the toilet to the floor.
    - Carefully lift the toilet off the floor bolts and set it aside.
    5. **Prepare the Area**:
    - Scrape off the old wax ring from the flange on the floor using a putty knife.
    - Clean the flange and surrounding area thoroughly.
    6. **Install the New Commode**:
    - Place a new wax ring onto the flange.
    - Align the new commode over the flange, ensuring the bolts pass through the holes in the base.
    - Press down firmly to seat the commode onto the wax ring, ensuring a watertight seal.
    7. **Secure the Commode**:
    - Tighten the nuts onto the bolts at the base of the commode, being careful not to overtighten and crack the porcelain.
    - Attach the caps over the bolts.
    8. **Reconnect the Water Supply**:
    - Reconnect the water supply line to the bottom of the commode tank.
    - Turn the shut-off valve counterclockwise to restore water flow.
    - Check for leaks and ensure the commode fills and flushes properly.
    9. **Test and Adjust**:
    - Flush the commode several times to check for stability and proper operation.
    - Make any necessary adjustments to ensure a snug fit and no leaks.
    If you encounter any difficulties or feel unsure about any step, it's advisable to consult a professional plumber to ensure the job is done correctly and safely.
    #howtochangeatoilet #howto #howtoreplaceatoilet #howtoinstallatoilet #howtoremoveatoilet #howtochangetoilet #howtoinstall
    #cmodtoiletfitting
    #cmodtoiletcleaning
    #commodetoiletseatfitting
    #westerntoiletseatcoverfitting
    #westerntoiletseatfittingtamil
    old video

Komentáře • 19