I thought there should be more travel in the levers. Good fix to this problem. Has the Fluids been changed in the Hydrostatic Tranmission and pump. That could also help the speed improve. They (Sears) say they are non serviceable, but they are.
Yes and no .The diy'er does not how to do it right. why Manufacturer knows that the end user will mess up. and ask for warranty. Ae: Contamination Plus unless you have a leak. You don't need to change it really you don't. Unlike the pro units with filters that need changing because of use. Ae: lots of heat on tho's units. How do i know this? Iam a former outdoor power equip.tech. of 15+ years. Stay safe Fly the flag.
My LT1000 was way out of warranty and wouldn't move when hot or on the side of a hill. Nothing to lose here, so I took it apart and found the transaxle way low on pump oil. No idea where it went, but I filled it back up with 20-50 oil. Been running great for weeks now. Like I said " Nothing to lose".
That is a blanket statement. St. Auvustine grass shoukd be mowed much higher than most do. In the summer, 4.5" is ideal or slightly taller. Bermuda and centepide like to be mowed much lower,
I know this is older vid but I have same model and I’m having trouble adjusting the linkage. My neutral is almost halfway up in drive gear. Could use some help thanks
Have problems with throttle staying in operating speed and the other thing it is doing when you go uphill it will slow down and stop can any one help on these problems
I’ve got a 2006 craftsman gt5000 but it won’t roll freely even when rear neutral pin is pulled out. I re did the brake but nothing was wrong with them. Jacked the rear up & wheels move freely by hand but go in opposite directions. ??? Any help!
If the transmission has ever been opened. There is a tiny pin that pushes the motor out enough to free the pressure to make it roll free. The pin is easily lost if you don't know it's there. If it hasn't been opened, somewhere in the linkage is probably messed up. Maybe rotating on the spindle???
Good job But. You just voided your manufacturer liability coverage by modified part w/o the manufacturer authority telling to do so in writing. How do i know this. Iam a former outdoor power equip.tech. of 15+ years. Now you can increase the engine rpm's by +50 to a 100 rpm's by the book with in the manufactuers rpm's guide lines. That will help you with ground speed and blade tip speed and stay with in spec's and be covered. #2 check linkage for binding or pedal adj. maybe out of adj's. Ground speed is not the end all be all. A slow to med.speed is better for a higher quality of cut and sharp blades. And that apy's for all mowers . Plus if you want to cut your mowing time you need a zero turnng mower. A frt. or rer will never beat a z-rider for ground speed...Plus it's the zero turning that beat's you not the ground speed.... You can have both A Frt eng rider and a zero with the same cut size and ground speed. and the "z" will still beat you. Seen it with my own eyes. Been there done that. Stay safe and happy mowing every one out their. And yes i still have all of my fingers...
With your experience, what mowers do you like the best? We have this craftsman that was being thrown in the trash by our neighbor.... three years ago... Still holding on pretty strong, but it is not without its own problems. Trying to be prepared for the inevitable!
@@bethcrandell4152 In today's world b.c. They all have their bad points. From transmission to body/deck frame and engines. As i work on more commercial equipment ae: Lawncare profesional. Honda upper level wb mowers in the $800.00 type. Toro, exmark. But to tell the truth. I have seen $12,000+ mowers look like hell after one week. 20 year old mowers that has been cared for. Spend the money on a great brand but take care of it. upper Honda,toro, at a real lawnmower shop not big box stores. I hope this helps you. Ps: " on and cutting " We're on the job stained in oil and grease, Turning the wrenches keeping all the "cutters" at ease, Repairing and maintaining and op's checks too, To keep the lawn gear on the green. " on and cutting " - " on and cutting ".
@@bethcrandell4152 you may want to check out taryl fixes all common problems video. Won't tell you what mower is best, but could give you an idea on what motor to look for or to avoid.
I thought there should be more travel in the levers. Good fix to this problem. Has the Fluids been changed in the Hydrostatic Tranmission and pump. That could also help the speed improve. They (Sears) say they are non serviceable, but they are.
Yes and no .The diy'er does not how to do it right. why Manufacturer knows that the end user will mess up. and ask for warranty. Ae: Contamination Plus unless you have a leak. You don't need to change it really you don't. Unlike the pro units with filters that need changing because of use. Ae: lots of heat on tho's units. How do i know this? Iam a former outdoor power equip.tech. of 15+ years. Stay safe Fly the flag.
My LT1000 was way out of warranty and wouldn't move when hot or on the side of a hill. Nothing to lose here, so I took it apart and found the transaxle way low on pump oil. No idea where it went, but I filled it back up with 20-50 oil. Been running great for weeks now. Like I said " Nothing to lose".
labrd41 0
Grass should be cut slower than most want to do. A slow cut looks better.
Vacuum your carpet the same.
That is a blanket statement. St. Auvustine grass shoukd be mowed much higher than most do. In the summer, 4.5" is ideal or slightly taller. Bermuda and centepide like to be mowed much lower,
@@claytonweeks8846 Dude said slower....not lower.
@@kykrazy6050 lol
I just need it to go fast so I can get to school early
Last seen heading south at 162mph. 🤣
Good to see, mine has same problem,
I know this is older vid but I have same model and I’m having trouble adjusting the linkage. My neutral is almost halfway up in drive gear. Could use some help thanks
I wanted to swell the dough up and filed the whole backup with the rat telephone😅
?????
love your jack stand although a block will take tons of weight when placed flat, they are not so good when standing or on the side.
"Crush position" in construction lingo.
Have problems with throttle staying in operating speed and the other thing it is doing when you go uphill it will slow down and stop can any one help on these problems
Does the "S" in YTS designate the slow or slip option package?
Machine is making popping sound in rear end
How to start a craftsman riding lawn mower
your my hero
You're *
Hope it lasts forever
Could you re post this with audio?? Keeps cutting in and out, thanks.
TheTorkerman-Adam it’s your end not his cause mine is good
my tractor slows down smallest incline then picks up speed on level ground . You have idea what cause that ?
You need nitrous.
@@theamerican7080 Worked out awesome
🌹🌹🌹👍👍👍🇱🇧
how much faster did it make the lawn mower?
60 MPH
nyguy117 Nascar fast lmao
Mach 1.6
My tractor is start to slip. Would that make it stop slipping?
I’ve got a 2006 craftsman gt5000 but it won’t roll freely even when rear neutral pin is pulled out. I re did the brake but nothing was wrong with them. Jacked the rear up & wheels move freely by hand but go in opposite directions. ??? Any help!
The wheels go in the opposite direction because that’s how the dif works
As for the other problems I have no idea
If the transmission has ever been opened. There is a tiny pin that pushes the motor out enough to free the pressure to make it roll free. The pin is easily lost if you don't know it's there.
If it hasn't been opened, somewhere in the linkage is probably messed up.
Maybe rotating on the spindle???
Good job But. You just voided your manufacturer liability coverage by modified part w/o the manufacturer authority telling to do so in writing. How do i know this. Iam a former outdoor power equip.tech. of 15+ years. Now you can increase the engine rpm's by +50 to a 100 rpm's by the book with in the manufactuers rpm's guide lines. That will help you with ground speed and blade tip speed and stay with in spec's and be covered. #2 check linkage for binding or pedal adj. maybe out of adj's. Ground speed is not the end all be all. A slow to med.speed is better for a higher quality of cut and sharp blades. And that apy's for all mowers . Plus if you want to cut your mowing time you need a zero turnng mower. A frt. or rer will never beat a z-rider for ground speed...Plus it's the zero turning that beat's you not the ground speed.... You can have both A Frt eng rider and a zero with the same cut size and ground speed. and the "z" will still beat you. Seen it with my own eyes. Been there done that. Stay safe and happy mowing every one out their. And yes i still have all of my fingers...
"You just voided your manufacturer liability coverage by modified part" LOL
sometimes you just need to go a lil faster...
With your experience, what mowers do you like the best? We have this craftsman that was being thrown in the trash by our neighbor.... three years ago... Still holding on pretty strong, but it is not without its own problems. Trying to be prepared for the inevitable!
@@bethcrandell4152 In today's world b.c. They all have their bad points. From transmission to body/deck frame and engines. As i work on more commercial equipment ae: Lawncare profesional. Honda upper level wb mowers in the $800.00 type. Toro, exmark. But to tell the truth. I have seen $12,000+ mowers look like hell after one week. 20 year old mowers that has been cared for. Spend the money on a great brand but take care of it. upper Honda,toro, at a real lawnmower shop not big box stores. I hope this helps you. Ps: " on and cutting " We're on the job stained in oil and grease, Turning the wrenches keeping all the "cutters" at ease, Repairing and maintaining and op's checks too, To keep the lawn gear on the green. " on and cutting " - " on and cutting ".
@@bethcrandell4152 you may want to check out taryl fixes all common problems video. Won't tell you what mower is best, but could give you an idea on what motor to look for or to avoid.
Flood can I ask a favor
The factory make garbage riding mowers I don’t why