How to Terminate Anaerobic Adhesive Fiber Optic Connectors from Corning
Vložit
- čas přidán 16. 02. 2012
- www.fiberoptics4sale.com/c/Fib...
Get Corning Anerobic Fiber Connectors from Fiber Optics For Sale Co. www.fiberoptics4sale.com
More recent versions of a cured connector are Anaerobic Connector and the UV Light cured connector.
With the Anaerobic connector, a base epoxy is injected into the empty connector, while the connector's end face and the bare fiber is dipped into a 'primer'. As the coated fiber is threaded through the connector, the primer acts as a sealant cutting off oxygen to the base epoxy which in turn allows the epoxy to harden. Hence the name Anaerobic Connector (lacking oxygen).
These connectors are considered fast and convenient, though they can be a bit messy if proper housekeeping is not maintained. Like the heat cured and the 3M Hot Melt, once the epoxy is cured (a mere few seconds), the fiber protruding from the connector is scribed and polished to completion.
The UV Light cured connector has the same general concept but uses a UV activated epoxy for curing. Hence you need a UV lamp and electrical power nearby. - Věda a technologie
Good video...nice wee refresher for me as about to do some polishing that I havnt done in about 6yrs 👍
A very informative video. Well done.
Great video! Thanks.
What lapping films did you use for each step?
gostaria de saber tambem
What are you using for the adhesive and activator?
Will Loctite 680 work?
I live in a country where certain primer is not allowed example Henkel SS 7649.
Can u suggest me henkel alternatives for adhesive and primer.
Thanks
what do you call that fast connector? is it SC?
harhar capa he used an SC connector
Nobody uses the yellow expensive stuff lol - brown to green.
De ionized water is the best FYI
para limpar ou para polir
@@rafaelpena9679para polir, para limpiar IPA