1977 Malibu Classic Build #7. Rusty Crusty Door Swap. Manual to Power. Pins and Bushings. Fireworks
Vložit
- čas přidán 7. 07. 2024
- I start a new build with a 1977 Malibu Classic that has been severely rusted out in the past. It pretty much needs a complete body swap, so let's get started! In this video I do a door swap from manual to power, replace door pins and bushings and paint the door jamb. I also show some local fireworks.
Product Name: Hiboy MAX Pro Electric Scooter
5% discount code: CCMAXPRO
Hiboy Website Link: www.hiboy.com/
Official Product Link: www.hiboy.com/products/hiboy-...
Amazon Product Link: www.amazon.com/dp/B0BZCP67SD?...
/ clunkers-and-classics-...
/ clunkers_and_classics
clunkersandclassics@gmail.com
You can support the channel by buying a bumper sticker for $5. You can pay to my email address clunkersandclassics@gmail.com through Paypal.com.
If you would like to send parts or anything, you can send it here. Much appreciated:
Clunkers and Classics
PO Box 262
Mead, Oklahoma.
73449 - Auta a dopravní prostředky
I watch a lot of car u tube videos and yours are one of my favorites. 😊 Keepem coming. 😊
Thanks!
Agreed
Yep, this channel is one of the few that I watch every upload.
💯
agreed
Amazing transformation Lee! Looking Good!
Thanks
Man this is great I can't believe you are willing to cut a roof off and keep going all the way to the front. Keep up the good work.
That is some major work, but the end will justify the means. Nice work, Lee! Thanks for taking us along!
Thanks
I appreciate these videos man, doing things on a budget but not just completely half assing things to pump out content like so many others
Thanks
Great work. I'm with you. It would be different if the big parts stores were selling OEM quality, but it's the same China stuff. Son's 04 Pontiac Vibe needed a ignition coil, $79.99 each or $259 for a 4 pack, same price at all the big 3 parts stores A 4 pack from Anazon was $32.00 and arrived next morning at 5:45 AM.
everything is overpriced at the local auto parts stores
Been on the hunt for a 70's 2 door Malibu for a while.
Sir, you are not doing a lot of rambling, you're doing a lot of work. Great googly moogly!
Wow😯great job Lee. Putting a lot of work into it. But it looks amazing. Really coming along. Great save👍💯
Thanks
Love this build - I admire your ability to tackle each aspect of your builds- engines, electrical, body etc - great mechanic!!
Thanks
Where are all the cats? Haven't seen them.
Love the stance of the 77 Malibu
What most people will never appreciate is that while you are right-handed, you have built all of these cars with your left hand. :)
If you can’t find that filler panel you can usually tuck those 70’s bumpers in. Looks better and trimming a few inches off a huge car is a good thing.
I don't like that look
@@clunkersandclassics understood, you could whip a spacer up out of steel and bolt it in. Quick and easy here but not sure it would be at your shop or if you have a lot of metal shaping gear? The sun has destroyed them up north here, a lot of nice Cadillacs are running around with bits and pieces of what is left of them. Even saw a 80 Volare the other day with one still 95 percent hanging in there all faded, cracked and some edge missing. Chrysler used some kind of rubbery plastic for them as well on that car.
I see them online around $150.
I think it's just the center piece tho. The ends are separate. They want $120 a piece for the ends.😯 Ecklers is the name of the company that has them.
It's rollin' along!
Someone was an artistic master with bondo on the bottom of the doors. :D
Man, that was a lot of work on those window regulators and doors (and this whole car, really). It's looking good though. Thanks for making the videos.
Thanks
Nice video, thanks for explaining 👍 and showing
Thanks
Love the way you can bring cars back +I am a fan of the novas love them
Thanks
Hi Lee, you have more patience than any doctor. Lol love your videos. Get yourself a magnet to check for bondo, I’m from WV and anytime we go looking at used cars here a magnet is your best friend. Just thought this might help you. Keep up the great work, you the man.😊😊😊😊
Thanks
Hi Lee great work as usual. Polite suggestion, you can buy a gopro that straps to your forehead like a flashlight so you can work two handed and film at the same time.
Lots of time consuming editing filming that way.
@@clunkersandclassicsI understand why you don’t do it but that is the only complaint I have. You don’t show much of the work being done. You show us after you’ve done it. But like I said. I get it. I understand why you don’t. You’d spend as much time editing as you do working or more.
@@clunkersandclassics we need to hustle you up some more subscribers so you can pay someone else to edit. Lol
I love the way Lee does things. He gives a nice explanation of what he's gonna do and BOOM gets er done. Skips all the small time consuming tedious boring stuff. He gets a lot done in an episode the way he does it. I think it's genius! IMO 😉✌
@@michaelbristol6467 that has truth to it but it’s also easier to learn if you’re watching someone do it versus them talking about the finished product.
them black doors were fu*ked glad you could see it and brown ones are going on! well done mate
You never want to take the factory hinges off unless you need too. So hard to get back correctly
The whole corner of the door was bondo ! 🤣 " just bondo all that rust, then paint it and sell it!" 🤣
G'day mate awesome build my brother great content buddy thanks 👍👍🇦🇺🇦🇺
Thanks
Wow them doors were shot! Looking good Lee you're killing it brother! 😉✌
Thanks
Lee I hope you get everything secured around there before that hurricane hit Texas..
Just drizzly rain all day today
The window regulator springs must be absolutely free of surface rust to prevent the coils from binding on themselves
Happy 4th of July to you. I remember that fire due to fireworks. Hope you have no problems. Hope you get those doors repaired to your satisfaction. I know you hate poor workmanship. Thanks for sharing! 💯💕👊👍
You were looking forward to beating on those doors to show us the rust. 😅 I could tell, because you were talking about how wasted they were for weeks. I would have liked to take a whack at them with a body hammer too! 😅
Thanks.
Awesome
ATF works great for rusted - tight problems and its cheap .
Lee, I think you need a sticker that says "Save the Disco cars!" because you are doing it when nobody else is.
Well, they're cheap to buy initially.
Sweet
But you know I think Art loved that car … just didn’t have the money to keep her at her best … but you are doing an amazing job
I can’t believe those doors are that bad. I would have run the other way and left that car were it sets damm you are a funny man but I know thats a lot of work you are doing 😂😂😂😂❤❤❤❤❤
👍👍👍
Your the fuckin man lee!!🇺🇲👍
Justa hint from an old body guy. those hinges change sizes when you put new pins in.try adjusting the screws mounting holes or drill holes bigger.as for the rusted door give it to carter restyling.lol.peace
Howdy Lee I sent pictures of the rear bumper filler I have for sale
Thanks but I found a place that sells them new for $109 plus shipping.
@@clunkersandclassics if its replica plastics there Junk and you will hate the fiberglass fitment
@@74hotrodmalibu Dixie Restoration Depot
🏁 it's really coming along Lee. awesome job Lee!!🇺🇲 🏁🏁🏁😎🏁🏁🏁🏁🏁🏁🏁🏁🏁🏁🏁🏁
Thanks
👍🏻
Try skyco ospho rust converter, does the same job a hell of a lot cheaper than the spray. You can get a gallon for around $30.00 at Ace hardware. I've used it, it works. The Malibu is coming along nicely, the cragers were made for it lol, especially with it jacked up in the ass end, brings back memories of my youth. 👍
Great tip!
The reason the hinges slightly move up and down a little is because those bushings where you put them in is supposed to go into the bottom the one on the top goes into the top. The bushings have a flat side that make a washer that fills in the gap on the top and bottom of the hinge piece that bolts on to the door.
Mr. B. Here ! 🍔🍸👀😎👍🇺🇸. What’s so sad to bring that car back you had to cut up gold one , witch you stated the valve was not there ! The Colonnades do not have many follower , I own two Cutlasses one a real 442 purchase new in 1976 . Sad to say the has eaten the frame & people I trusted to do rust repairs over took short cuts . The 2nd Cutlass was a Nevada so I have transferred all the 442 parts to the Nevada Cutlass S. There are many fakes out there that is why I have not listed what was the 442 package . My Cutlass S now has 442 DNA . So Lee I more than many of your viewers know the work you have put into that vehicle ! Nice job waiting for paint . ☕️👀😎👍🍩
Thanks
Happy 4th🎉🎉🎉🎉
I can definitely tell you did this for a living at one time, you know your way around these cars too well,i do roofing and siding,i can tell when someone knows what they are doing or if they just helped their uncle put a roof on in a weekend, you definitely know your $h!t .....this project would be intimidating as hell to me, parts cars are the way to go,save some money,parts cars nowadays are as expensive as project cars.....do you like 2nd gen camaro firebirds????
Bushings top top bottom
Looking good do you paint your own cars you are one hell of a body man I just know you can paint to keep up the great work you are doing bro ❤❤❤❤❤❤😎
Yes he paints them himself. 😉✌
@@michaelbristol6467 he is one hell of a man he is good at everything i love that he reminds of me when I was able to do that until I broke my neck I have to take it easy now but I know that is some hard ass work because I have did it before ❤️❤️❤️❤️👍😎
@@redwinstead7873 Hell yeah Lee doesn't play around! Be well brother! 😉✌
@@redwinstead7873 you should go back in his playlist and watch the 68 Nomad wagon build from start to finish. It's 1 hell of a build. He even put an LS engine in it with all new suspension everything. It's My favorite build he's done. Unbelievable!!! 💯❤✌
Nice clean door. Those years metal aint as good as say "70.
You are one handy guy. Any shop would hire you
I quit working for the "man" in 2001.
You might want to try backyard spa for rubber for filler between rear and bumper
👍👍✔✔✔✔👌👌❤❤😎😎😎😎😎😎
Good afternoon from Cape Cod ⚓ yep those doors are definitely trash 🗑️ Man dude you're putting a lot of work into that car, it certainly is shaping up nicely 👍 a couple of weeks ago you mentioned Nikki is behaving differently, at the same time I noticed you got rid of all the cats, I'm betting she was becoming fond of the cats as company. Anyway keep up the great work dude ✌️🇺🇲
Nikki hated the cats
Nice job! Love the content! Keep up the great work! Also how much you selling that ride for?
Thanks. $10k
my bad just found out it just a malibu classic and not a chevelle wow the grill is 300 and side badges 15 a piece
I don’t recall what you said happened to Art, but I’d be curious if he’s watching the progress you’re making on his car and what he thinks of it?
I'll let him kmow soon
About a month ago i went into Lowe's in my town to, unfortunately, purchase a dishwasher. The old one was just not cutting it anymore. As I was walking to the appliances section i noticed that there were not 1 but 2 employees there. I'm like sweet, i don't to wait. I told them i need a dishwasher but they said they didn't work in appliances and they had to call the employee who does over to help me out from wherever the fuck she was at. So i wait and wait and wait. 5 minutes go by and i'm like wtf is going on! I get pissed, my blood pressure is spiking, and I said straight up to those 2 dipshits, I can't wait any longer, this is bullshit. And then i walk right out of that damn store and went right next door to Home Depot. Luckily there was an actual employee there to help me when i got there. FFS, its not that hard to keep employees in their departments, there for the whole day.
I hear ya. Not much options in my one horse town though.
Any chance of Art buying this car back after its done? If not it would be cool to let Him take a test drive on it!!
What I do before I go to a store like Lowes or Home Depot I pull up my local store on the internet. Look for the item I want and it will give you the aisle and bay number along with the number in stock plus the price. This way I know exactly where to go in the store for my item. Saves one a lot of walking around time.
I saw were someone made those rear fillers with tote lids might be something to look at I don’t know ??????
Try changing the switch i have that problem with my truck
The gaps look ok on the passenger door, build quality for 70s cars weren’t the greatest to begin with. Bondo on the driver’s door looks more like papier mache.
🎉🎉 how's Meggie doing?
who?
what happened to your cats?
that dam Putin tax hike... wink wink
I don't know why you're constantly complaining about prices going up, some guy who lives in a big white house in DC told me this is the best economy ever and there is no inflation.😆
I appreciate your penny pinching builds keeping it real.
inflation is a small part of it but it's mostly price gouging by some retailers. Years ago before inflation a gallon of bondo was $18 at Walmart. Exact same at O'reillys was $38, a $20 price gouge. Now it's $59 a gallon at Walmart but I buy online now for half that price.
People like you never blame the real cause of inflation, greed by the big national corporations. Has been going on since the early 80's.
@@clunkersandclassics this is a very reasonable response. Truth be told the economy is complicated and just can't be entirely blamed on the president. Big business has been draining Americans dry for a long time.