Electrical Wiring At The Meter Box (DIY Version)
Vložit
- čas přidán 7. 09. 2024
- Access The Domestic Single Phase Wiring Course Here. 👉topheightselec...
A meter box or board is the link between the power grid and your home electrical system.
How safe is your electrical wiring system?
Loose connections are a recipe for disaster in the home electrical installation.
A consumer unit is the heart of every electrical installation and it must not miss.
Proper wiring of all the circuits in the house are easily monitored by the safety gadgets in your consumer unit.
I will be taking you through the process and explain how sockets, lights and earthing connections are done.
Electrical installation for house wiring should be very safe for the user and the entire property. The world has advanced in technology for renewable energy eg solar and wind power generation.
Home automation has become the norm since we use software such as siri, Alexa and Artificial Intelligence to automate our home electrical and electronics systems making our lives better.
#electrical #howto #video #wiring #viral
In my three years career in Diploma(power option).I wasn't taught this, theory with zero practical.Oooh at the right time,things become beautiful says the Lord.
You have made me built confidence in myself.
same!
Same
since i graduate from university i did not get good wiring like this and thanks you so much for your effort to make this to be known in the whole world
Am am great full ❤am loving electrical engineering
I am learning very clear explanation thanks keep up brother
I have seen some people asking for these cut out fuses. You can get a separated earth neutral model or a combined earth neutral model so if you don’t wanna come by them, you don’t have to but obviously obviously it has to fit with the electrical systems design. On the right hand side in the orientation is here you can see there are three smaller bolts on the cutout. If you use that side to punch out holes then neutral and earth can be put individually and very are a much secure Fitt I thought I’d let you know these things just cause I’ve worked on these before. There hasn’t been a budget limit on the distribution network in the UK soI know a lot of the tips and tricks to do with these
Thanks so much brother.Junior engineer here
Hi everyone of the that are watching this lesson , thank you very much can you continue teaching us I like the link 😊😅
Hello Obvious, I am grateful to have you here. I will for sure!
that Lesson was good, i always encourage the use of cable lugs for the meter dressing and the Earth Connection, it give a very strong torgue and grasp by the screws
Thanks a lot. I have watched a lot of CZcams videos.. you are the best. Sound English,high quality videos and clarity of explanation ❤
What a great feedback Wiseman Lutomia! I'm really humbled.
Ooh,this what i wanted,God bless engineer😊
This is great bro, continue with that spirit
This video was so educative, please keep up the good work.
Wow thank u for coaching members u did great job let almighty God bless u🎉🎉🎉
Thank you so much Moses for your kind words and feedback.🙏🙏
Good topic engineer well under stood
Thank you so much Eric!
Sir this video is very good for us
Thank you so much Top Boss Anwar for your feedback.
Today's lesson well understood thanks a lot👷
Thank you so much for your feedback Jomo 🙏🙏
Thanks man
When doing this i hope power from main pole is off yeah?cause I can see you are touching it without cloves
Thank you sir for your lesson, watching from Tanzania.
Wow! I am so grateful Ben. I hope to visit Tanzania soon!
your videos are top-notch Sir thank you
Really! Thanks for your feedback as usual 🙏🙏
Hello thanks for the technical lessons, can u do for us back up system with an automatic change of over ,Le 🏠 using both electricity and solar power, iam in Uganda
Hello Webbo, I am working on it. I will release it soon. How is Uganda?
Yes thanks, I have client who wants it's in two months time.when I come over to Kenya I hv to see you
❤ nice good information
Thank you Sameer!
Great job well done watching from Ghana
Thank you so much Michael. I'm happy to have you here.
🎉Daniel watching from Vera technical Nakuru Bahati
I can't tell you how grateful I am to have you on the platform Daniel, thank you so much. Say hello to your comrades.
Been waiting for this thank you sir
I’m so honored to be the one sharing it with you Evans. Thanks for your patience.
I
Iiked
the
video
Thank ubso educative at campass I didn't learn anything but here I did
Your response has lightened up my heart! Thanks.
Good teacher goat of electricity ❤
I salute you , your work is so nice
Thanks a lot Danston, it means the world to me.
I have Learnt about it now. Thank you very much.🎉
I really appreciate your feedback Sakala.
Very understandable teaching skills
Thank you so much for this feedback.
Hello, I'd like to enquire if you are familiar to this statement "hanging neutral"..if so what does it mean?
Hello too Atieno and great question that you have asked. Did you mean a floating neutral?
Is the earth and neutral coming from the place
Engineer help me on connection of 2way using twin tower with the earth as a common
Dpmcb ni amp ngapi ya metre box and do we use the same mm za wire drop kwa metre box
I saw 2 inlets of the phase side but am seeing only one connection
Is that on the cut out fuse? If that is the case it’s meant to just give you an option where to put it as if we’re fitting it somewhere where where another rent was used you have to make it work.
Wonderful teaching i believe i will learn more from you sir and am looking forward to learn to connect a geyser
You are in the right place Clement!
What are the disadvantages of bonding earth and neutral?
Nice lesson Mr John ❤
Thanks Ronald.
Thanks for the lessons
I appreciate you taking your time here Jonathan, it means a lot to me.
So where will grounding pole behind my house in the ground be connected to
👏👏👏 keep up well done 👍👍
Absolutely Victor. Thanks!
Great job
Thanks Maina
It's good physical we are Best people thank you God be with we
I am so grateful for you!
Well taught. Can we use a dp in place of a cutout?
Thank you for learning ours
You are welcome Abdi.
I love your simplicity well done😊
I'm Electrical thank you
Glad to know you Bartholomew.
Pls make a video on how to wire prepaid meters. Thanks in advance
Well noted and working on it Atieno, I will notify you once I drop it.
Quite beneficial, keep it up Engineer
Thanks Mohammed, I will 💪
Thank you sir for your lesson
Thanks for watching David.
Top looking forward to learn more from you
Hi Ravi, it's my pleasure.
Earth rod distance yake ya ground
can gives us a lesson on how to wire a lightining arrester db box
Learning alot from you,,,, could you please explain how we connect token meters
Thanks a lot Moses. Yeah sure! I will collect several token meters and demonstrate.
Is the neutral and earth connected in one hole?
In this case, this is a complaint neutral earth cartel you can get separated neutral earth cut out as well
does the neutral and earth wire meet?
Wondering that also
Thanks boss
You are welcome!
Just to say this is a great tutorial but don’t just follow a CZcams tutorial this stuff you have to do proper research and probably consult with someone who is qualified
Good teaching skills
Thank you so much Patrick!
Good job 💪 like the lessons.
Thanks Ali.
What about of three phase connection
I will cover it too, thanks.
good work
Thank you, I've seen your channel, great work too!
So the earthwire goes in with the neutral wire in the cutout upto the consumer unit?
No, the earth wire connects to the neutral at the meter board but at the consumer unit they're separate. TNC-S system.
Great question Tumasalim.
Correct Peter, thanks for sharing your genius.
Can the double pole switch be pleased after energy meter
Good question Turb. Yes it can.
Hi mister engineer
Nice one
Thanks King!
holy moses... you're amazing
😂😂 it's because you are Action!
Please let the video be zoomed when doing it.
I am well guided Hassey, in the next video I will do it.
How do we connect the earth in scenario where the meter is on the utility pole
Great question William, you connect it from the consumer unit to the earth rod directly.
Sir can you explain for 2 or more rental units at this box pls 🙏🏼
Absolutely possible @cheezboy. I will do it.
thats goog of u🥰🥰
Please for a video on how to choose circuit breakers
Absolutely Tanyi, I already covered it.
@@topheightselectricians please for the link
@@tanyiemma4680 here you go: czcams.com/video/b_nOZsSigPY/video.htmlsi=6aKUNZYoXgBLx5Y3
Why not use cable lug to connect those earth wires to the bolt
Great question for sure. Thanks I'm well guided Brian 🙏🙏
The conduit work is not the best, be a good craftsman.
I agree Peter. It is a demo.
Mimi nijue tu how to stop it from beeping below 10 units
Eish Moraa 😆😆
😮 y not use a striper instead of using the kitchen 🔪 😁
Got it, thanks.
From cut out then to DP switch?? I thought it is from cut out to meter then DP switch
You can even have two of the DP switches Kamenju. One before and another after the energy meter.
Saddle on bend😢
Sad saddle, right Xavier?
so you have decided to introduce a kitchen knife into electrical engineering?🤣
Ian I see you 😀😅
Dont adhere with safety hand gloves needed and cable knife
I didn't see where the third earth coming from 😢
The first is from the neutral connection, the second is from the consumer unit and the third is connected to the earth rod. Did I answere you Top Boss Maposa?
@@topheightselectricians OK sir , thank u very much bro
Much welcome@@rockmaposa3109
Is the earth and neutral coming from the place