How to Replace Heater Blower Motor 2005-2010 Chevrolet Cobalt
Vložit
- čas přidán 5. 09. 2024
- Buy Now!
New Heater Blower Motor with Fan Cage from 1AAuto.com 1aau.to/ic/1AHC...
This video to learn how to install one in your 2005-2010 Chevrolet Cobalt. The blower motor, and typically integrated fan, is responsible for blowing the heated or cooled air from your heat or AC system into the cabin of your vehicle. A fan could become noisy if it is broken, or could stop spinning all together.
This process should be similar on the following vehicles:
2005 Chevrolet Cobalt
2006 Chevrolet Cobalt
2007 Chevrolet Cobalt
2008 Chevrolet Cobalt
2009 Chevrolet Cobalt
2010 Chevrolet Cobalt
Tools you will need:
• Pry Bar 1aau.to/oa/1AXA...
• 7mm Socket 1aau.to/oa/1AXA...
• 1/4 Inch Ratchet 1aau.to/oa/1AXA...
• 3/8 Inch Drive Ratchet 1aau.to/oa/1AXA...
• 3/8 Inch Drill Bit 1aau.to/oa/1AXA...
• Drill
• Gloves 1aau.to/ob/1AXS...
• Safety Glasses 1aau.to/oa/1AXA...
• Razor Blade / Gasket Scraper 1aau.to/oa/1AXA...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
What year is this specific model? That's the million dollar question. All the years of make in the description aren't this difficult, I'm sure. I have a 2009 personally; I'll post what it looks like in a following comment. My motor has quit, so I'll see what it looks like and if it makes more sense for a mechanic to replace or if I can do it on my own. You have to weigh both parts cost and what your time is worth.
I used a 5/16 drill bit and 8, #8 5/8" sheet metal screws. Youre welcome
my motor didnt come with screws
oh and the far reaching part SUCKS on the back side.
How do you know when you have a bad blower motor?
I am stumped. My blower quit working. I replaced the control resistor & motor. Check all the fuses and relays they all seem good. I am getting 6 to volts dc where the motor plugs in. What am i missing?
My car is dripping water from this blower motor. I checked the sunroof and it’s not coming from there. I don’t know where else it could be coming from. Any help is much appreciated!
You would think its made of gold with all that work. I guess ill deal with the noise until it dies.
What ever happened to bolting these motors in . This could have bin a 5 min job if it was designed better! Someone had to engineer what once was an easy job to change out of the design . Turns what once was a 5min job into just over an hour. GM should be embarrassed.
Just when I thought I'd seen every cheap built product GM had built. I'm a retired certified mechanic, but this kind of manufacturing is the result of the now China Motors Corporation.
GM knows that most of their newer cars are junk and won’t be collectible, thus the prescribed repairs ensure points deductions at car shows.😂😂😂
What if you break teeth off the fan part
What an asinine design. This is why engineers are hated.
Embarrassing Chevrolet