Building A Kydex Vacuum Press PART 2.
Vložit
- čas přidán 11. 09. 2024
- Building a Kydex Vacuum Press.
Thanks to all those that have posted their videos, they were not only inspirational but also technically acurate.
The Fine Print: No humans or tools were destroyed making this video. This video is for entertainment purposes only. The content of this video include or may include high voltage wiring, moving parts, suspended weights, risk of fire electrocution and many other hazards. These hazards are capable of serious injury, death or property damage and destruction. Consult a professional before attempting anything you see in this video.
Thanks for these videos! I successfully made this press with a few upgrades and it works great! Just a note: I started with a 2.5 CFM pump from Harbor Freight and I used the same size but box to test (Dewalt box). This pump could not influence the membrane enough to start the process. I upgraded to an 8 CFM Robinair Vacumaster and I replicated the same thing shown in the video, where the box started to warp inwards due to the sheer amount of vacuum. In summary, just go all out and buy a good pump.
Nice work!
Interested in this build but would be nice to see how the membrane was connected, how you connected the table, the grid marks in the plate part sandwiched between. Were there holes in the inner center part? So much seems missing from videos
... was there a part 1.5 or something? If the battery died, it would be nice to at least get a rundown on what you did there instead of showing us how happy you are that it works.
Apologies...I will be adding in the future, ran into some issues with CZcams.
The best one i ever seen
How much for one of those
Can I connect with you about it? I build it but I some leaks that I can't find
Can I do 6*3foot plastic sheet on the door?
I'm sure if you bag it, suggest looking at some composite manufacturing videos.