How to Repair Disassemble and Resolder Instrument Cluster Dashboard on FORD FOCUS
Vložit
- čas přidán 9. 09. 2024
- Video: How to Remove the Instrument Cluster.
• How to Remove Instrume...
there is a part in the video , where I unbox a solder Iron , just skip it. I forgot to remove it when uploaded the video.
@MeFixingEverything
how to repair ford instrument cluster,ford focus instument cluster repair,ford focus instrument cluster fault,RMAutodiag,rmautodiag,ford focus not starting,ford focus wont rev,ford focus dashboard,u1900 can communication bus fault,u1900,ford focus immobiliser light flashing,ford focus immobiliser car wont start,ford focus instrument panel fault,stripping down ford focus dash,ford focus mk2 dash fault,instrument cluster repair,focus dash repair
If this video helped you save some $$$, a coffee tip would be highly appreciated. Thanks !
This cluster matched my cluster exactly and instructions in the video were really useful. I bought a £15 soldering iron and have never done it before. My car is now fixed, thanks for the upload. Total time for me was hour and half.
Did this yesterday on my wife's 2008 Mondeo. Hitting the top of the dashboard stopped being effective last month. After watching your video, i decided to have a go with nothing to lose. Working perfectly now, including some of the steering wheel controls which haven't worked for 3 years.
Thanks for the video. €350 saved.
Thanks for the upload! Just fixed my cluster and my car lives again
I am getting error
Lost control with instrument pannel cluster and
Lost communication with body control module
Are these two because of same problem
@@vamshikrishnaaa very possible to check if it is indeed when it happens give a big slap on the dashboard.. if the light goes away for a bit when you slap the dashboard then it almost 100% possible is the joints just like shown on the video
Lead free solder is the cause of the problem with these clocks.
Use 60-40 lead-tin solder with separate rosin flux. 👍👍
I am getting error
Lost control with instrument pannel cluster and
Lost communication with body control module
Are these two because of same problem
Cheers for sharing. I will not scrap my car just yet. Lol
Always found a fork works very good in pulling indicator needles off.............
A Fork works well to take off Dials.
I am getting error
Lost control with instrument pannel cluster and
Lost communication with body control module
Are these two because of same problem
I'm almost 100% confident , any other problems?
the cost of the repair 250 euros, if I had seen this video before I would have tried to repair it myself...😢
Thanks for sharing it