How to Engrave a Glass Soap Bottle with xTool M1 Laser
Vložit
- čas přidán 15. 06. 2024
- Supplies Linked Here:
✔️ Rotary Attachment with Risers: amzn.to/3Ixncmk
✔️ xTool M1 10 W Laser (includes RA2 Pro): amzn.to/3WGPQFz
✔️ xTool M1 10 W Laser (includes RA2 Pro) directly from xTool: www.xtool.com/products/pre-or...
✔️ Cylindrical Soap Bottle: rstyle.me/+BAB6L6aHPtVmo1miV_...
✔️ Odd Shaped Soap Bottle: rstyle.me/+nPxQIXOu-t1Kr2GdEe...
✔️ Chalk Paint: www.143vinyl.com/starcraft-ch...
Chapters:
Intro: 00:00
Introducing Project: 00:20
Painting the glass: 01:08
Setting up the RA2 Pro: 01:40
Setting up xTool Creative Space: 03:14
Framing (incorrectly): 05:19
Engraving (incorrectly): 06:05
Fixing xTool Creative Space: 06:18
Measuring the Perimeter: 06:48
Reframing: 08:00
Re-engraving: 08:38
Reveal: 08:57
Conclusion: 09:30
Additional Tutorial Mentioned in Video:
Engraving on Wine Glass (explains about the paint): • How to Engrave on Wine...
Setting up Laser on Risers: • How to Engrave a Tumbl...
Shop My Cricut Faves Here: www.amazon.com/shop/karley.hall
Shop My Favorite Vinyl Here: www.143vinyl.com/starcraft-hd...
*use code KARLEY
Website: karleyhall.com/
CZcams: czcams.com/users/karleyhall?su...
Instagram: / karley.hall
Facebook: / karleyhallcreative
Facebook Group: / cricutcraftswithkarley
Legal Disclaimers:
Affiliate Link Commission Disclaimer:
Some links above are affiliate links. By clicking on these links I may earn a small commission at no cost to you. Some products may have been provided to me by vendors, however, all opinions and reviews are strictly my own.
Use at Your Own Risk Disclaimer:
Karley Hall will not be liable to You or anyone else for any decision made or action taken in reliance on the information given by this video or for any consequential, special or similar damages, even if advised of the possibility of such damages. - Jak na to + styl
![Eminem - Houdini [Official Music Video]](http://i.ytimg.com/vi/22tVWwmTie8/mqdefault.jpg)
Great video!❤
Thanks for such a good video! I always like when the presenter talks slowly, and clearly. I helps so much. Thank you! I have watched other machine owners cut stickers with vinyl. . How would that work for planner stickers?
Your intro was soooo cute!! Love it! Great video.
Thank you 😍🥰
just add a hands graphic after the word in the first try!🙌
love the intro!
Thank you! I am still work shopping it-- but I think it's fun!
Hi Karley, thank you again for a great video! I recently etched 2 stemless wine glasses and the design came out great. What I did notice however is that the paint did not come off all the way. It almost looks etched into the design in a couple of spots. I did use the same StarCraft chalk paint in black. Do you have any suggestions on what may be causing that ? Thank you
Do you have any plans for videos to show how to engrave pictures on items and engraving of rings?
Your delivery is easy to follow and your videos are easy to watch and simplify things extremely well.
I have subscribed and look forward to browsing through existing and new videos
Thank you
U can
lift the door and the RA2 can be moved no need to plug and unplug , great idea on using the ring holders
Yes- you can! But for me that sends me back to Creative Space and I don’t like clicking through all over haha. Does that happen for you? By not opening the door, I can just keep clicking the button on the laser if that makes sense!
How does it work with regular wine, champagne glasses?
You can use the rollers and the level attachment to hold the stem :)
I have noticed on mine if I lift the lid and close it then lift again it unlocks the chuck. I do not have to unplug the wire to do this.
It locks back up when you frame.
I do want to try the black paint you are using.
Yes- it’ll unlock- but also cancel the action for me. Is that the case for you?
No I have been able to line things up and pick up where I left off. I found this while adjusting a coffee mug in the chuck.
I just reframe and it is still set.
@@ThePapa1947 I’ll have to try it out! Thanks! Whatever I was doing was cancelling it out and sending me back to the XCS design screen!
Hi Karley, as I said I would test this out again.
So after framing if I do not like how it is looking I open the lid and you do have to close and open right back up.
This releases the chuck and allows it to be adjusted. Close the lid and reframe again and you are all set.
This does not work after you start the burn.
Prior to finding this I would shut the machine off and turn it back on. This for sure will take you back to the beginning.
So give it try I am sure you will like the option.
Problem is you will not find this kind of info in the manual
I found this by accident and you will not find this information in the manual for sure.
So I am a wood turner and these laser companies have been asking us to make a short video in return for the laser machines. I have tested a number of open style lasers as well as the LaserPecker 2
I also rely on videos such as yours to learn the ins and outs. I will be watching your channel more. You give information in a very easy to understand way.
It is what I try to do with my woodturning.
Sure hope it works for you and I see no reason why it shouldn't.
Gary
What about using Tempera paint?
I have another video- engraving wine glasses and I show why I don’t like tempera paint!
@@KarleyHall Do you have a link to it?
@@jackking8026 How to Engrave on Wine Glass with xTool M1 Laser
czcams.com/video/jG02Upx1Tzo/video.html