EPOXY RESIN MISTAKES ON CANVAS AND HOW I FIXED IT / CRUSHED GLASS CHRISTMAS TREES
Vložit
- čas přidán 25. 08. 2024
- FAVORITE THINGS LIST:www.amazon.com.... FACEBOOK GROUP ;
/ 1584956105346842 In this video I show you how to repair a problem with blotchy, thin resin that I encounter while making a crushed glass Christmas tree. I also end up making a second Christmas tree with the extra resin from the first resin repair.
PRODUCTS USED IN THIS VIDEO:
TOTAL BOAT RESIN .51 PER OZ: amzn.to/3roF4pb
DR CRAFTY RESIN KIT: amzn.to/3ruyflM
SILVER & BLUE CRUSHED GLASS BOTH FOUND AT MICHAEL'S CRAFT STORE
CRUSHED GLASS: amzn.to/3ncp8oF
CRUSHED GLASS:amzn.to/3ru5lSP
HEAT GUN: amzn.to/3qA9XYo
OTHER PRODUCT LINKS:
TUMBLERS:
MY FIRST SMALL TUMBLER:: amzn.to/326qGcr
MY SECOND TUMBLER HIGHLY RECOMMEND :amzn.to/325ZtXk
MY 2ND LARGEST #MJR 40 LB TUMBLER: amzn.to/3FChfPC
60/90 GRIT FOR TUMBLERS: amzn.to/3tB2wl... Supplies:
ADHESIVES FOR GLASS AND TO HOLD THE GLASS PANE TO FRAMES:
KWIK SEAL ADHESIVE CAULK: amzn.to/3FH7pMl
LIQUID NAILS 2 PKG : amzn.to/3rKwPEf
GE TUB AND TILE SILICONE CLEAR: amzn.to/3rpt5aQ
RESINS :
DICTION RESIN KIT: amzn.to/3tGeZVv
TOTAL BOAT RESIN .51 PER OZ: amzn.to/3roF4pb
JANCHUN RESIN KIT: amzn.to/33wzOaW
DR CRAFTY RESIN KIT: amzn.to/3ruyflM
ART RESIN: amzn.to/3Ii4w6H
CLEAR CAST 7000 ; amzn.to/3rrqkWz
DYE FOR RESIN & GLASS:
KRYLON SEA GLASS SPRAY PAINT: amzn.to/3GF3fG6
KRYLON STAINED GLASS SPRAY PAINT: amzn.to/3ox3EUB
ALCOHOL INK TO DYE GLASS & RESIN :amzn.to/33GejnV
METALLIC ALCOHOL INK: amzn.to/3nz7Fac
OTHER SUPPLIES:
20 PIECE MEASURING CUP SET: amzn.to/3tAdSX3
SILICONE MATS: amzn.to/3FCR7U... nipper tool: amzn.to/31FB3mR
GLASS NIPPER TOOL: amzn.to/3rnEfgp
FIRE GLASS: amzn.to/3Id8T2D
HEAT GUN: amzn.to/3qA9XYo
SMALL KITCHEN TORCH: amzn.to/3xZW87T
BUTANE FOR TORCH: amzn.to/3I65ylU
CRUSHED GLASS: amzn.to/3ncp8oF
CRUSHED GLASS:amzn.to/3ru5lSP
GLOSS MODGE PODGE: amzn.to/3IbI1QH
DISCLAIMER: All Amazon links are connected to my Amazon Associate account. I earn a small commision from each purchase without any increase in cost to you.
They are both great looking. I love how you include errors you encounter….and we all experience those. So your ‘fixin’ them is invaluable!
My tree trunk on my tree kept floating. I tried a few things and slowed it down..lol. But sometimes there are ‘happy accidents’ and I like the way it turned out.
Thank you! Yes we learn from our mistakes and from others. Can't wait to see your project.
So beautiful, great gift ideas to give my daughter's. Made with their Nana's old jewelry. 💞
Thank you That is a great idea
Absolutely Love Them, Especially the Blue one! ❤❤😄
Thank you!😊
Oh my goodness. I can’t thank you enough. I’ve just done my very first resin picture on canvas. It is really pretty, but, I could of cried when I came home from work and saw that just like yours the canvas around the edges are all patchy. I’m now more hopeful I can at least try to fix it because of your brilliant video.Fingers crossed. I love your finished Xmas trees. Thanks again and love from England. 🙏🤗
What kind of resin did you use? Because since I’ve made that video I have made some more videos showing that it might’ve had to do with the resin more than anything else.czcams.com/video/CX-2ChcJke8/video.htmlsi=PL4l2IsO3RiLUtOr
You give great instruction! Thank you for sharing.
You are so welcome!
Stunning!! You are so creative!!
Thank you! 😊
So beautiful, you did a great job.
Thank you so much!
They look beautiful!
Thank you!
These are absolutely beautiful ❤
Thank you! 😊
BEAUTIFUL!!❤❤Thank you!
Thank you!😀
It has been about a year since I first found you and your wonderful videos Linda. You’ve been quite the inspiration not only for myself but also for the many who learn from your experience and creativity.
Wishing you and your loved ones and Happy Thanksgiving and a time to count all our blessings! Pass me a drumstick!
Thank you so much! Yes there are so many in need, I do feel blessed. I appreciate all your kind words and it makes me so happy to know you have learned something from me. Wishing you and your family a happy Thanksgiving also! Can't wait for the pumpkin pie!
BEAUTIFUL!!!!!!! 😍💜💜💜
Thank you!!
Turned out very cute
Thank you!!
stunning trees
Thank you!😀
Thank you for your video, they are very pretty. Merry Christmas!!
Thank you! Merry Christmas to you too!
WOW! Love these projects! I appreciate your honesty about the resin issues you experienced! Thank you.
Thank you! So since then I have been using art resin and I really have not had that problem again.
I really enjoyed your videos such pretty work, thank you for the idea of using the mod podge I'm sure gonna try it, thanks for sharing
Thank you, and you are welcome!
Very beautiful!!!
Thank you so much 😀
Absolutely beautiful 😍
Thank you! 😊
Those are both so cute!! This video is just what I was looking for. I have been looking for something to see how pouring resin over crushed glass that's already applied to canvas would turn out and this is the first one I could find. So glad I came across it because it not only answered my questions but inspired me for some XMas projects too! 😊
Glad it was helpful! Thank you!
These are beautiful!!! You make it look so easy!
Thank you so much for sharing!!!
Thank you, and you are welcome!
Yes, I get that same splotchy look with my resin. So annoying. I will try and use your method to fix my picture. Thanks for sharing.
Good luck! Now that I have been working with resin for awhile I have not had the same problem. I am wondering if it had some kind of reaction to the spray paint I mixed with the paint. Or if it was the resin. I think they have doming and casting epoxy resin. I have been working with the brand Art resin now alot and I have not had that problem.
Very pretty thanks 😊
Thank you!😊
Very pretty,you've been inspiring me. I just made my first Green tree on a frame. And I decided to try it with modge podge. It turned out well, and I decided to add another layer of Glass on top so I'm redoing that that's drying now. Thanks again.... Just wondering what do you do with your creations after you make them? Imagine you run out of room in your home to show them.
Thank you,I would love to see what you created. Well I’m going to give most of them away I volunteer at a food pantry and I will bring some up to the volunteers and the big snowman my daughter already claimed and then I have some cousins not too far away I’m going to give a couple of the Christmas trees to yes I am getting quite a collection
Gorgeous 🎄🌲
Thank you! 😊
Very pretty
Thank you! 😊
Beautiful
Thank you!
These are just amazing! Great instructions and how to fix it! Very unique 💕
THANK YOU. I'm still learning.
Beautiful! Thank you for sharing Ive seen these similar on Pinterest and wondered how they do that🤔 finally! Found someone that shared how to❤️. I have a question since I’m new at this, The tree topper did you just place in the resin or did you pour resin over it? And I’m guessing everything stays in place because the resin acts like glue? Thanks in advance
Thanks so much! 😊 yes I just stuck the topper in the resin it dries rock solid. I am happy to answer any questions you might have.
Love this video! Very informative! I think I'm gonna give this a go!
Thank you! Love to here about it . Happy to hear I'm not the only one thinking about Christmas already!
Beautiful 💖💖💖
Thank you! 🤗
So pretty 🤩
Thank you!!
Loved this video! New subscriber now!
Yay! Thank you!
I have an update to this video czcams.com/video/CX-2ChcJke8/video.htmlsi=JCPJlMO6NuMnhGXr
Wow! Very pretty!! It looks like the issue with the resin might have been some oil on the canvas. Could be from the spray paint (I’m not sure what’s in it) or it could even be oil from your hands. Regardless, you fixed it and it turned out great.
Thank you for sharing your talent!! Very appreciated!! When you reapplied resin to fix up the issues did you sand the previous resin first? I have been told by a resin company to do that but I didn't notice that you did. I would rather not if I dont have to LOL.
No I did not. I did not know anything about sanding at that time. They say that you are suppose to sand so that the new resin has something to hold onto. So I did a big red heart a few moths later thats when I learned all about sanding. It turned out a mess and I sanded and reapplied the resined and it turned out beautiful.I tried multiple grit sand papers the learned 80 grit was the best to use. It's one of my videos. I am learning as I go. LOL
Could you share why you wished you’d taken the tape off earlier? I was wondering if the edges floated out nicer if you took the tape off early? I’d be afraid it would run off uneven and make a mess. I love your videos and SO appreciate your advice❤️
So that video was from last year and I have learned so much more since then. I think the reason the resin didnt stick in areas had more to do with the resin then anything and I repoured with the tape around it so that it would create a resivour so that the resin had no choice but to stay there. I think it had thickened up to much had went down the sides uneven. That was why i said I would take it off earlier. I now use art resin and I have not had any problems with it sticking so I no longer use tape except when I remember I put it on the back to prevent the resin drips from creating drips on the back.
I hope that helps
Yes, that does help! Thank you for your help!!😊
Great!
Hi, I used epoxy Craft Resin. I’ve just tried taping around the edges like you, but I’ve just done a stupid thing. I used my utensil to stir it an d lots of old bits came off on to my picture. Aaaaarrrrrh. I’ve tried to pick them out and I’ve added more sparkles to try to disguise the mess. OMG, is this a learning curve or what. I think I’ve spoilt it because of my impatience to get it finished. Thank you for responding. X
So I did this video a couple years ago and I recently discovered that the reason this had all the blank spots or fish eyes had more to do with the resin . If you but the coating or doming resins like Art resin or Ks resin you will not need to tape I will link the video showing you that . Yes those stir sticks can be a pain if you do not clean then sometimes you can sprinkle glitter or tiny crushed glass to hide it . if everything is on the surface you could sand and re-pourczcams.com/video/CX-2ChcJke8/video.htmlsi=4rCqQHkHG7NaCcJ3
I love the look of the thicker resin, it just gives it more depth on video. I just found your channel and subscribed and now I’m watching all of your videos. Have you tried Plaid brand Gallery Glass? I’ve bought it at Hobby Lobby in the past but not sure if they still make it.
I’ve heard of gallery glass but for some reason I thought it was in smaller quantities and they used it for jewelry yes I have a hard time with resin on canvas I’m used to doing it with resin and glass with the frame around it
Beautiful!♥️
Thank you!
The tiny Christmas decorations.. I am trying to find on Amazon but can’t find. Not sure what search words to use. Any idea?
Which ones? I don't think I used any in this video? Hobby Lobby , and walmart have small decorations for the miniature trees.
Where do you find your crushed glass at a decent price ?
Michael's craft store they always have the reflective silver which you can color any color with the 2 different translucent spray paints or with alcohol ink. I do not recommend alcohol ink for regular glass but for the crushed glass it seem to hold up fine. then at different times of the year they have different colors and they are only out for a short time and quickly go to 70% off. But you can always find a coupon on line for 20% 0ff. Hope that helps
Do you have a Etsy store?
No, I don’t sell anything
czcams.com/video/dMqmKrRgxm4/video.html
Beautiful 💖💖💖
Thanks 🤗
Very pretty
Thank you exclamation