Minibricks: 🦖 A huge spinosaurus in the thick of an epoxy wave
Vložit
- čas přidán 10. 12. 2020
- The diorama is very complex, but at the same time so amazingly beautiful. The huge wave will be made of epoxy and will look significantly cool.
👉 Minibricks Store - runnytimes.etsy.com
🌿 Super realistic trees, roots and flowers for dioramas bit.ly/3Nammug - Jak na to + styl
Official manufacturer of XPS ★ www.penoplex.ru/
★ Here you can order this www.etsy.com/listing/868716607
S A L E
★ U.S. Route 66 www.etsy.com/listing/868408262
Lindo top 😊👍
Beautiful top 😊👍
Hey where's the one with Godzilla.
You recognize skills when work is good
You recognize mastery when you look at this video.
@@kelvenmathias2mostraranima144 @@
Where can one get the Decor X10 and for how much ???
What is this craziness!?!
Beaver actually commented lol and I was early to comment on his comment. Pretty pog.
Nice thegamingbeaver actually commented
Hmm
Omg this tgb I love you ❤️❤️❤️❤️❤️
Beaver???? What are you doing here lol
Even without Spinosaurus, their death was inevitable.
I mean. Look at the wave man
The Spinosaurus probably brought the wave with them, scary
Yep, that's what I was thinking when he first positioned the boat. "Oh damn, a huge, giant wave AND a freakin' dinosaur?? What a way to go."
So... joe how did you leave the world and come up to the heavens?
Oh just a wave and a 100 meter dinosaur.
... yeah right
No I’m serious!
@@popqrn4759 who is joe
@@albert.33 Don’t ask ridiculous questions
The homemade wave mold is absolutely bonkers. I hope you were able to get all off in one piece without any tears (it sure looked like you did)! I can imagine it’ll make future crazy wave dioramas a heck of alot easier!
Fabrication Pro Tip: They could have made a reusable mold by making it 2 part. But its a bit of a long process. First youd use WED clay and basically a cheese cutting string (we use guitar strings, the tool looks like a garrote wire used to choke people) to make uniformly thick slabs and cover the whole thing with them. This makes a gap they youll fill with silicon later. After its covered in the clay, cover it in fiberglass. Make some ribs with thin strips of clay to lock the soft inner 'face tool' into the fiberglass later too. Once the fiberglass is cured, peel out the part and the clay (DO NOT DAMAGE THE PART YET!!!) and clean up all the clay and surfaces, silicon hates other stuff as it cures. Then put the hard outer jacket over the part (BTW this is a million times easier if you make a fully enclosed mold. you basically do all these steps twice front and back) and pour your silicon into the gap where the clay was, and wait for it to kick. Another Pro-Tip: forget the paraffin and hexane silicon release, Dawn dish soap works better and is WAY cheaper, just watch out for brush strokes leaving surface textures. Then once its kicked remove the hard jacket, then peel off the soft jacket! TADA! Now you have a mold of something that might contain under cuts which would lock up a hard mold like fiberglass and bondo, but peels right out of the soft silicon jacket! Just dont damage the silicon in the fine detail places. Youll never be be abel to repair it.....
Not only is this amazing to watch but why is this insanely calming??
It's a shame CZcams isn't recommending your stuff
Edit: alright this didn't aged well, good job yt
But I just got this video recommended to me.
I just got this recommended xD
Now it is 👍
But It was in my recommendations
ayy got in my recommendations lol dont know why but Ill watch it anyway
Sailors be like: "Holy crap, giant wave headed towards us! nothing can be worse than this."
Little did they know...
Spinosaurus:are you sure about that?
Spinosaurus: Im bout to end this man's whole career
And then out of the massive wave comes the equally as massive Spinosaurus as it lets out a mighty screech and with a deep menacing look in its eyes and booming voice it says: “Bonjour” as it swallows the ship and all the men aboard and dives deep into the ocean as the massive wave crashes down and the waters calm like nothing was ever there.
@@Soybean493 HELP THE BONJOUR LMAO
This takes “Needing a bigger boat!” to a whole new level. lol Very well done!
XD VERY TRUE!!!!!!
“reference”
Gonna need a battleship
@@Huggle_Puff A BIG battleship. Preferably equipped with missles or something...
The level of detail in all of your projects is just insane!
Very nice idea and execution. Congratulations 👍👍👍
В попочку
Indeed!!! 😀👌👌👌
It's gotcilla,seriously?
DUDE 8:08 ITS LITERALLY AN EXECUTION
@Shane Devine me too
I can't imagine the anxiety you felt while cutting up the spinosaurus
Exactly! XD
I was like: "What??? NOOOO!!!"
It's not like he made it, it's 3d printed
@@osa313 he still painted it which is difficult and 3d printing is not easy either. What you just said is like the equivalent of "digital art is not real art"
@@epiccheeseman42069 I meant you are talking about anxiety i believe it is would be way more stressfull if he had sculpted it! The advantage of 3D printings you know is in my opinion he can rely on it if anything goes wrong. But of course the paint job and aplication is great
YES
There are no words short from AMAZING and SPECTACULAR to DEDICATED and SKILLED to describe the artist or their work
This is really good, at first I thought the spinosaurus looked to much like it had land based colours but I then realised you would not be able to see it in the water. The only other thing is the pupil was looking up rather than at the boat, that small change would have made this perfect
Ah, it's this time of year again where CZcams recommends me these types of videos of talented people being successful at something because it knows at times I'm some lazy ass that just sits at ease, soaking in hours onto CZcams because there isn't any other thing to do. Thanks again, CZcams.
These self destructive comments really don’t help anyone, it can really bring down the artist and just make yourself feel worse.
There’s tonnes of online classes and free tutorials on CZcams to teach you anything you want to learn, it’s just a matter of accepting you won’t be good at it at first and to keep trying to get to where you want to be. No artist is ever fully satisfied with their work, no matter how much we tell them we love it. Stop being hard on yourself
@@Voiidpriince Properly, I wasn't trying to be negative, but I understand where you're getting at. Anyone can ascertain most things if they wanted to, it's all about promptly putting the time and concerted effort into it. We all designate what we want to covet as a part of our social lives and we also choose when to be lazy. But yeah, I get what you're remarking so my bad for naturally making it look like I was intentionally trying to be negative.
I watch CZcams during online school 🙃
Build something like this and get on CZcams
@@ericjohnson8001 a career has been set in motion 😎
i wish there was a teaching class like this. I would definitely sign up
I would to that sound really fun and cool 😎
Sound*
Sounds* sorry autocorrect:/
@@claubausenwein9276 you can edit your replies lol
teach yourself, watch vids and muck around with it
This is one of the most impressive displays of creativity, attention to detail and execution I've every seen!
Go on his channel and tap the sea monster in a pool one see that :)
It baffles me how talented people can be. It’s sooo inspiring.
Each one of your pieces are just pure dedication ! Nice job, very pleasant to watch people knowing what they are doing
spectacular!
🇮🇩 Hi, I'm one of your old subscribers from Indonesia. And I missed your old content like the dragon paper mache arts 🙂
@@MarshaNPILoveCanada Yes, I am still working, just not as much. Your pieces are amazing! And nice job with the videos. I have subscribed.
Est trop bien ce que je tu fais
Tu es 🇨🇵 ou pas
Vous êtes 🇮🇩.
I love how much detail they can get in such a big or small 3-D printed thing
This is from another level ! Watching you creating the wave was stunning, the result is worth watching the whole video..thanks for sharing your talent
It must have been nerve-racking to cut the dino after spending all this time painting it...
But the result really paid off. It's really splendid.
Ikr
This Music is BEAUT! Could watch these all day with that kinda music! The body underwater looks awesome!! Probs my fave part! Its awesome seeing how these are made....thankyou
I am blown away by the creativity and execution. I cannot stop watching these.
I am a diorama maker and i must say Damm lol.. you have out done yourself. The idea brilliant , execution was flawless, the detail is razor sharp. Even the lighting, temperature of the colors just truly amazing. The Heroic cut through the dino then assemble was insane. When you think it could not get any better, the calming melody is a touch from the heavens. Very well played my friend.
Thank you for using soft pleasing music as the background. Good job.
Really impressive! This is real art. Love how the epoxy water looks like.
Your technique is so cool and you nail the ocean blue exactly what I imagine it to be.
This channel is amazing and you can see someone who is so genuinely talented in this craft, everything is done so well and you can just feel the genuine love the creator has for creating lol awesome stuff!!
Can I suggest a Polar Bear swimming under an ice pack, it would look great!
The best resin wave I've seen... absolutely beautiful!!!!
the way you create this thing, the imagination you have, the details just amazing
I cannot express how well executed this project was!!!!!! Waaaaaaay Coool!
This is sooooooooo amazing! I would have loved to see dripping water details perhaps in the mouth and splashes where he's bursting out of the water because I saw you do that in other videos and found those details next level! I'm seriously amazed by this and cant even process how talented you are!!!!!!!!!
Absolutely stunning results after that process - I would never have realized the degree of difficulty until having watched the entire process it takes to get this amazing finish!
I watched half of this video with my mouth wide open, and the other half rewinding to make sure I actually saw what I just saw..... Incredible skills, talent and presentation! Take a bow!
Beautiful! Do you think you could do some water streams falling off the face and mouth with maybe fishing line and resin? Because something like that would have just given this a little bit more motion. The foam looked incredible!
“Half my body might be gone, but at least I look fly as fuck.”
Dæmön 2021-
Wow, I think this is really great. I think this is art. I'm clumsy, so it's amazing to see people who make it like this. I envy them. They're so cool
Would’ve loved to see you make the Spino. Love watching you’re clay work man.
I’m amazed honestly when I looked at the thumbnail I thought it was a painting the wow factor on this peace is through the roof
You art work is amazing!! I call this art because its gorgeous and so much skill! 😀
This is amazing, do you think you could do a Giant Manta Ray? that is like my favorite sea creature and I would love to see how you would present them.
This is absolutely incredible. Your talent and hard-earned skills are wonderful.
I wish they had put water dripping off the spino, just missing that extra level of detail
2 days ago i rewatched all the Jurassic park movies on Netflix. Nice timing! haha
The concept and execution are both awesome! Though when it comes to personal preference I enjoy having this style of content being narrated by the creator. Allows me to learn & connect with them along the project rather than just go "Oh pretty product!". Hearing of deleted clips & alternative ideas throughout the project would be fun!
Thats what patron for
Do you sub to TheCraftsman? His videos have all that and he's AMAZINGLY TALENTED with a very cool personality.
@@iamV10010 Shall check them out! I only came across this particular video through youtube's random recommendations. Hadn't quite seen much of the resin creating community.
not only do you make an epic thing with a spinosaurus but you can hook it up to lights. damn it's impressive
This kind of reminds me of the Wyland art sculptures. The process and techniques are so fascinating!!
Amazing super creative with the foam on the wave!! Love it! Super excited for the next diorama for Godzilla as I'm a massive fan
The things you make are amazing and creative! Your like a next level engineer if I do say so myself!
That came together beautifully. Well done.
I am a huge fan of dinosaurs-especially spinosaurus. This was amazing
Que importante poseer las habilidades y por supuesto herramientas y accesorios para realizar un trabajo tan hermoso como este! Decir Felicitaciones se queda corto, pero FELICITACIONES Minibricks!! Los pequeños detalles hacen las grandes diferencias y usted logra hipnotizarnos con cada uno de ellos!! Un abrazo Minibricks !!!😘😊
All your creations are authentic works of art !! Here you have another fan of your work !! Gundam is a passion !!
The shape of this skull is unmistakable! :D You used Gojira as a base template and prolonged his snout, adding the sail as well, didn't ya? Even with all of that - great freakin' job! Enjoyed watching this!
Absolutely Awesome !
I saw the thumbnail n wondered how you did the crest of the wave. Love it
Keep on creating
The project was so time-consuming. That I managed to notice how my nails grew a little. Amazing work.)
This is so fricking amazing, the details and motion in the piece are absolutely astounding. So beautiful 👏
the concept of half way in water and half way out alone is brilliant
look at that huge wave coming to the small boat! I am happy the Spinosaurus comes for saving them!
He just showing is that he Can’t only make a Cubeof water but also a HUGE waves, truly a master pieces
かっこいい…海の部分の艶が出た時鳥肌たった
Your mold making skills are beyond amazing
The light in the epoxy looks incredible
I wish more spinosaurus bones gets discovered so that we can finally make an accurate sculpture :(
This is one of the coolest pieces of art I've ever seen!!
Spectacular creation. Clever. Construction. You have the patience of a. True Artist and Saint....
Очень здорово вышло :D Золотые руки во всех смыслах) Люблю подобные видео и вот что заметил, девушки куда более элегантно и аккуратно делают такие диорамы ;)
I know it’s not a Da Vinci, but this is one of the most beautiful and awe inspiring pieces of art I’ve ever seen. It makes me so curious about the oceans and what might exist. Just so beautifully done 💙💙💙
Don't count yourself short, toots, you're not bad looking yourself 😘 [farts loud] Sorry, had beans and cabbage for dinner because I'm poor. So if we hook up, baby, you're gonna have to break out the dough when we go to dinner and to WWE events. Damn straight, you's better be into WWE, all my women are!!! ❤️
@@little.bear344 the fuck?
@@little.bear344 wtf did i just read?
@@little.bear344 I love how unexpected this is 😂
I have watched every video in ur channel, its an amazing channel and we learned some techniques from u, thank you for everything and could you please show ur face just to know who is making this ❤️
So cool and the Spinosaurus look amazing and the wave.
I love your imagination and creativity! So much fun!
I could never do something like this, great job!
This amazing sclupture will be perfect when added some detail of water splash and wet on the monster's body and face.
Beautiful work!!
This is so beautiful! You are so creative I love what you do!
At 8:03.... I was like, "Noooooooo!"
Look at how they've massacred my boy!
The Spinosurus too UnU
It’s lunchtime for spiney! A boat with a side of sailors! This is an absolutely phenomenal work of art! ❤️👍
Impressive artistry and craftsmanship.
These types of videos are SO much more satisfying and interesting than watching videos of people clacking and slurping around making food in their carefully staged kitchens. These types of videos are like Bob Ross in the modern era. With monsters, I mean.
Awesome, really kinda satisfying to watch all the details that go in to it every little detail.
How is this the first time I've ever seen this channel, I need more of these videos in my life
+1 subscriber
OMG, so much technic! a beautiful peace of art
incredible detailed build! also i love the front bottoms shirt you have!
When I saw the thumbnail, I thought it was CGI. But this is goddamn art. Well done!
"We need a bigger boat...!"
"We need a change of underwear!!!"
Wow. I love watching you make these awesome Models. I sure Hope you winning awards in model building. Your Work is#1.
This is so amazing.. I wish I was as talented as this man..
Did you know that spinosaurus were actually land and sea animals that’s why they didn’t have any feathers
New evidence in their tail shape shows that they lived primarily in the water
im pretty sure they didn't live in seas
dinosaurs*
@@shabbir9480 evidence that plenty of dinos had feathers, like therazenosaurus
@@christianlud6740 i know
Amazing work, The detail work, wow. One thing bugging me is that the Spino is way too big.
Awesome work you do! Congrats!!!🙌🏽🙌🏽🙌🏽
What an incredible and stunning work!!
У автора явно золотые руки, очень здорово 👍✨✨✨
it is a mix between spinosaure, mosasaur and godzilla.
No, it is a spino. The title of the video itself makes is clear
Asew tis but a joke
that spino is super big, like twenty sizes to big, yet you made it look real, great job on making it look so creepy too!
That is very cool, I remember in highschool we did an epoxy mold, I made a coin from a mold a foot in dia, but this is so intricate.
My girl and I have officially decided were getting into this together this stuff is so cool!
This video was great, then they introduced a cast, and silicone lost me then it made sense then lost me with the potato on a plank lol
Absolutely amazing video I’m glad that there are so many people out there with these talents for others to get inspired by thank you for the work you’ve done keep it up!
The fact you can things so..intricately I guess without getting like.any paint on your hands is amazing to me lol