I'm going over a gy6 150cc scooter wiring harness and explaining the wire colors and what a specific color wire does in the harness, identifying wore color codes for the gy6 150cc harness
Life saver! Thank you! I've gone thru all the videos from the so-called "pro's" and they leave out so many important details. Small to them I'm sure, but important nonetheless. Thanks for being so thorough.
A BIG thanks, neighbor got a old scooter (no key, of course) and missing parts etc. I had to fix the battery cable and jump the ignition switch wiring and the start button was broken but looking at a wiring diagram and what I learned here I got it to crank and run without having to butcher the factory wiring. Now all it takes is money. I keep telling him it's not worth it but it's his money. Surprisingly, it appears to have a good battery after charging it up.
Brilliant! Thanks for that, never found much info on my GY6 wiring. Less people seem to want to work on them in the UK or know much about them. Even for tuning kits it's mostly Stateside for the good stuff that's been tried and tested. Thanks again Kenneth.
Hey I'm trying to wire up A110CC Is China quad My wiring harness has a yellow with a white stripe and a blackWire together in a double plug I'm wondering where that goes
I have a question for you. I have 150 cc Chinese. when I pull the brake to start the scooter digital screen reboots and start switch is not working. When brake is pulled no brake light comes on and my horn also is not working. It seems that brake switch and thereafter there is a short. When I short the starter relay it turns. What do you believe I have the problem of.
Where does the black and yellow striped coil coil wire connect up to I can't find a video about it. I have everything else ran correctly but my coil wire. Harness won't get spark from spark plug.
Make sure your pick up wire is hooked up correctly from the stator its either red with white strip or blue with white strip that the signal wire for the cdi to run the coil
There is a black and yellow stripe wire in the middle of the wire harness that has a connector clamp on it but nowhere for it to go. So I was wondering if that wire was suppose to to be attached to the frame or ground. Not sure.
@@itsus4xThat Connector Clamp Attaches To The Ignition Coil It Should Have A Male Connector Piece Attached To It. For The Ignition Coil To Work It Needs To Have The Yellow And Black Wire Attached As Well As A Ground Wire There Are Two Types Of Coils That I Know Of One Has Two Holes On Each Side To Mount To The Frame And A Male Connector Slot Attached For The Yellow And Black Wire And The Ground Cable Goes On Either Side Of The Holes And A Bolt Holds It In Place And Grounds Out The Coil, The Other Has Two Male Connector Slots For Both The Green Ground And Yellow & Black Connector And Both Of Those Would Have A Female Connector End Also It Has A Hole Slot To Mount It To The Frame
I got a lance 149cc scooter...Im In need of alot of help I recently got a gy6 scooter the wire was completely everywhere in it the light were all hot wire on with a radio harness which made it more confusing I watch it video only problem for me is I need a complete break down from bare wire I want to redo the whole wire harness from Bak to front from battery to to lights can u help me pls
You can go on ebay and buy a brand new complete 150cc harness for less than $50 the one I use are like $30 If it is cut up and a bunch of shit added to it I would personally order a new harness unless you're in a country where parts arnt readily available
Ordering new harness is not optional I have the whole harness it's complete I jus wanted to start a whole good loôking wiring where it doesn't look all shitty....I can show u some pic of the scooter tht way u can walk me thru the wiring process
You did not mention the switch that has nothing but a single wire looped in to its own switch. Also I have an a/c cdi like you explained in detail but I also have a kymco which is a d/c cdi and it seems like the ignition and a few other things are different
Correct that's ac cdi and harness guess I should clarify that about 95% of scooters that run through here are the same occasionally very rarely do I fool with the other normally like you say a kymco or another tiawan bike not Chinese
Hello my name is Steven Harris I have a iceberg ruckus 2021 50cc I have a 1:50 CC harness the same one that you have on the and I'm having trouble could you help me I will send you pictures if necessary please?
Life saver! Thank you! I've gone thru all the videos from the so-called "pro's" and they leave out so many important details. Small to them I'm sure, but important nonetheless.
Thanks for being so thorough.
Best video ever thank you for making it
A BIG thanks, neighbor got a old scooter (no key, of course) and missing parts etc. I had to fix the battery cable and jump the ignition switch wiring and the start button was broken but looking at a wiring diagram and what I learned here I got it to crank and run without having to butcher the factory wiring. Now all it takes is money. I keep telling him it's not worth it but it's his money. Surprisingly, it appears to have a good battery after charging it up.
Brilliant! Thanks for that, never found much info on my GY6 wiring. Less people seem to want to work on them in the UK or know much about them. Even for tuning kits it's mostly Stateside for the good stuff that's been tried and tested. Thanks again Kenneth.
Hey I'm trying to wire up A110CC Is China quad My wiring harness has a yellow with a white stripe and a blackWire together in a double plug I'm wondering where that goes
Thanks. this video helped me alot.
Which wires work fuel pump on a grom
Actually The Controls On The Starter Switch Side Are Both Kill Switch Wires And Not Headlight wires
I have a question for you. I have 150 cc Chinese. when I pull the brake to start the scooter digital screen reboots and start switch is not working. When brake is pulled no brake light comes on and my horn also is not working. It seems that brake switch and thereafter there is a short. When I short the starter relay it turns. What do you believe I have the problem of.
Where does the black and yellow striped coil coil wire connect up to I can't find a video about it. I have everything else ran correctly but my coil wire. Harness won't get spark from spark plug.
Normally the yellow with blk strip coil wire runs from the cdi out to the coil and splits off in the harness to the front of the bike to run a tach
Make sure your pick up wire is hooked up correctly from the stator its either red with white strip or blue with white strip that the signal wire for the cdi to run the coil
There is a black and yellow stripe wire in the middle of the wire harness that has a connector clamp on it but nowhere for it to go. So I was wondering if that wire was suppose to to be attached to the frame or ground. Not sure.
@@itsus4xThat Connector Clamp Attaches To The Ignition Coil It Should Have A Male Connector Piece Attached To It. For The Ignition Coil To Work It Needs To Have The Yellow And Black Wire Attached As Well As A Ground Wire There Are Two Types Of Coils That I Know Of One Has Two Holes On Each Side To Mount To The Frame And A Male Connector Slot Attached For The Yellow And Black Wire And The Ground Cable Goes On Either Side Of The Holes And A Bolt Holds It In Place And Grounds Out The Coil, The Other Has Two Male Connector Slots For Both The Green Ground And Yellow & Black Connector And Both Of Those Would Have A Female Connector End Also It Has A Hole Slot To Mount It To The Frame
I want to run dc power from the light controls on the handle bars so I can run led head lights and turn signals what’s your suggestion
What make and model is your bike
Does it still have everything in the stock form
@@kennethawhalen1117 it’s a pony I was thinking I would just find the wire that’s supplies ac voltage to the switch and change it to dc
I got a lance 149cc scooter...Im In need of alot of help I recently got a gy6 scooter the wire was completely everywhere in it the light were all hot wire on with a radio harness which made it more confusing I watch it video only problem for me is I need a complete break down from bare wire I want to redo the whole wire harness from Bak to front from battery to to lights can u help me pls
You can go on ebay and buy a brand new complete 150cc harness for less than $50 the one I use are like $30 If it is cut up and a bunch of shit added to it I would personally order a new harness unless you're in a country where parts arnt readily available
Ordering new harness is not optional I have the whole harness it's complete I jus wanted to start a whole good loôking wiring where it doesn't look all shitty....I can show u some pic of the scooter tht way u can walk me thru the wiring process
You did not mention the switch that has nothing but a single wire looped in to its own switch. Also I have an a/c cdi like you explained in detail but I also have a kymco which is a d/c cdi and it seems like the ignition and a few other things are different
Correct that's ac cdi and harness guess I should clarify that about 95% of scooters that run through here are the same occasionally very rarely do I fool with the other normally like you say a kymco or another tiawan bike not Chinese
What wires are jumped or looped in that connector, the previous owner had a remote start unit I’m trying to remove
How can I tell if my scooter has a big bore kit
Measure the bore size , or across the top of the piston
@@kennethawhalen1117 is there a way to tell without taking the piston head off
I need some help
Hello my name is Steven Harris I have a iceberg ruckus 2021 50cc I have a 1:50 CC harness the same one that you have on the and I'm having trouble could you help me I will send you pictures if necessary please?