Custom-made wooden box for Goliath CNC
Vložit
- čas přidán 11. 08. 2021
- This week Goliath created a super useful project: the custom-made box to be carried wherever you want, easily! 🧳
We've simplified some of the details so the project is easier to assemble. Start your project now and make your own cool box!
📦 Download file and instructions: bit.ly/3zWgTAw
🔨 How we made it 🔨
- Material: Poplar Plywood 10mm
- Bit: 6 mm
- Feedrate: 1600
- Depth per pass: 5
- Timing: 2.5 hours
#GoliathCNC #GoliathCNCworld #GoliathCNCusers #Springatech
Find out more and order yours ➡️ www.goliathcnc.com/preorder
📬 Subscribe to our newsletter on www.goliathcnc.com/newsletter/
📣 Don't miss our latest updates www.goliathcnc.com/community/...
👉 Follow us
/ goliathcnc
/ goliathcnc
/ goliathcnc - Jak na to + styl
This looks great
And it works wonderfully, too! 🤩
tHANK YOU FOR THE INFO, i WILL KEEP WATCHING TO SEE IF AND WHEN YOU CAN DO THRRE "D"
Interesting adaptation of the Maslow concept. Since the bit is not on the center of rotation, I assume there's a method to measure and maintain the angle of the sled to the reference towers?
On its top, Goliath has a position spinner (the yellow one) that, based on its rotation, allows Goliath to always know where it is on the work surface and at what angle. In fact, this spinner is always linked to one of the two sensors, and its angle changes based on the movements of Goliath!
I have my eye on your machine for over a year. How long and how many passes did this project take to cut?
Hi there :)
The panel was 10mm thick and we went down 5mm for each pass. So, in total it took 3 passes for a full pass cut (Goliath goes down in a helical way so you always have to consider an additional pass).
This project took about 2 hours and a half to cut because there were so many pieces, with all the interlocking details.
@@GoliathCNC thank you! Pretty good
Is this actually shipping yet? Or is it still on pre-order?
these are shipping but takes about 6 weeks to get delivered.
iS THERE ANYWAY TO THREE D PROJECTS?
I believe the Z is too low, however I have seen a video where someone did it with like doing manual 3 layers of plywood
Hey :)
Technically it can be done but the software does not support this option yet. We will work on this as soon as possible!
At the moment you can engrave at different levels, depending on how the processing file is set up.
Hi there..
Is the Goliath compatable with sketchup software..?
no. they have their own software that generates a special code for the robot itself