GRACO Linelazer 3400: Switching from WaterBorne PAINT to solvent!!

Sdílet
Vložit

Komentáře • 23

  • @davidkaiser3309
    @davidkaiser3309 Před 9 měsíci +4

    I have the same machine and only run latex water base. I have never had a problem. Hopefully u get it figured out. When u do. Let us know what it is so we can learn about these machines as there is not alot of info/videos on this topic. Thanks for the content!!! ( i use RODDA paint)

  • @texaseditionsilverado7232
    @texaseditionsilverado7232 Před 9 měsíci +2

    Man you already got paint all over the new machine lol. Shows it’s being used for work.

  • @izaiahsanchez9296
    @izaiahsanchez9296 Před 9 měsíci

    I used to switch from water based to solvent often and you switching the hoses is the best call. I could clean the machine out very thoroughly and it still have issues. I would keep an extra packing kit with you incase too. Solvent based will forever be our go to. I dont know what sellers you have near you but the better solvent based ive used is transline armadillo traffic paint.

    • @TheStripingGuy
      @TheStripingGuy  Před 9 měsíci

      I’ve got a Center line and we plan in switching

  • @dls6625
    @dls6625 Před 2 měsíci

    If you use SW Hotline, switch to Ennis Flint. I get clogs nearly every time with SW. Haven't gotten one with Ennis Flint. If you have to use SW strain it a couple three times.

  • @richhoops2413
    @richhoops2413 Před 4 měsíci

    Please show a video of how you switch colors with solvent.

  • @dls6625
    @dls6625 Před 9 měsíci +1

    How do you mix your buckets of paint? Check your dates on SW paints. They sell paint that are a year or more old. When I buy from them, I make sure to have them put each bucket on the shaker before I pick them up. Latex settles and if it don't get mixed properly it can cause problems. Not saying you don't mix it well but it may be part of the issue. I switched from SW to Ennis Flint and love it so far. Also, when you clean your machine do you clean where the filter is or change out your filter? Seems like you are getting the water coming out and the thicker material is staying in there.

    • @TheStripingGuy
      @TheStripingGuy  Před 9 měsíci

      Yo, thanks for the trouble shooting. I switched paint machine rubs just fine. I guess it was the paint. I no longer like water bourne 😂

  • @BladePro2021
    @BladePro2021 Před 9 měsíci +2

    It could be the paint but I also wonder ,have you taken out the prime/ spray valve that you are turning right there? There could be some foreign material or something clogging the end of it just a bit, i have cleaned my valve on my 3400 a couple times this year and even replaced it once. I have never changes hoses when changing paint especially when going from latex to solvent based.

    • @TheStripingGuy
      @TheStripingGuy  Před 9 měsíci +2

      Hey, thanks for the comment. I haven’t taken the knob off just yet. That will be my next troubleshooting task.
      My reps and people that I talk to said it’s good to do it but not necessarily demanded. I know that latex is more prone to build up in the tube over time and just wanted to be 100 % sure.
      And it made for a cool video. Thanks for the comment, I really appreciate it

  • @JFstriping
    @JFstriping Před 9 měsíci +2

    I've been beating the living crap out of my 3400... Not once I've gotten a clogg brother... I'm striping Sam's clubs and massive plazas 🤔

    • @TheStripingGuy
      @TheStripingGuy  Před 9 měsíci +2

      It’s killing me. It’s gotta be the paint. I’m using a new paint tomorrow so we will see. I’m sure that’s what’s wrong

    • @luckyblack00
      @luckyblack00 Před 4 měsíci

      ​@@TheStripingGuydid you take the ball out and clean it? We have two 3400s at work and they give us problems as well. Line paint drys so quick especially on hot days. We constantly have to strain it

  • @jacobchavez7279
    @jacobchavez7279 Před 9 měsíci

    Where were you getting paint from? What brand?

  • @camcoleman5720
    @camcoleman5720 Před 9 měsíci

    Graco or titan? Can only choose 1

    • @TheStripingGuy
      @TheStripingGuy  Před 9 měsíci +1

      Graco, 3900 is phenomenal.
      Will be getting next.

    • @BladePro2021
      @BladePro2021 Před 9 měsíci

      @@TheStripingGuy you will enjoy the 3900. I run a 3400 and a 3900 , the 3900 is a lot heavier but a better painter.

  • @kcpcommercial
    @kcpcommercial Před 9 měsíci

    Strain that latex paint before.

    • @TheStripingGuy
      @TheStripingGuy  Před 9 měsíci

      I strain it every time 🕰️

    • @kcpcommercial
      @kcpcommercial Před 9 měsíci +1

      ​@@TheStripingGuyalso Graco has a great customer service team that will walk you through whatever you need. Titan doesn't do that. Call them up. They helped me a lot. You probably just need to clear out that ball inside ya pump.

    • @TheStripingGuy
      @TheStripingGuy  Před 9 měsíci +1

      @@kcpcommercial took that off as well still happens. Once I switch if it’s still does it then I’m going to press them more