I Bought The CHEAPEST Plasma Cutter On Amazon. Is It Any Good!?
Vložit
- čas přidán 2. 08. 2024
- We buy and test the cheapest plasma cutter on Amazon, and compare it to a Table Band Saw, and a Grinder as far as cut, speed, use.
Plasma Cutter - amzn.to/2DbijMw
Plasma Consumables - amzn.to/2QHGwBj
Bandsaw - amzn.to/2YUSOMQ
Portaband Stand - amzn.to/2KPXf1D
Milwaukee Cordless Grinder - amzn.to/2Z9rVUH
AHP Tig Welder (Best Bang For Buck AC/DC Tig IMO) amzn.to/2VqjLTW
Time Stamps
0:00 Talking about the cheap plasma cutter, why try it, etc
3:15 Unboxing The Plasma cutter
4:40 Assembling the plasma cutter
9:20 Using the plasma cutter and testing out it's abilities
19:41 Comparing the Plasma Cutter Cuts to a Table Bandsaw and a Grinder Cuts as well as discussing use cases for each cutting device
26:52 Conclusion
Thanks to all who support me on Patreon! - www.patreon.com/taylordrifts?...
FOLLOW ME ON INSTAGRAM
ME - / taylordrifts
ALSO ON TWITTER / taylordrifts
Snapchat: taylorsaysdrift
Milwaukee Tool
Let me know what you thought of this video! - Auta a dopravní prostředky
Time Stamps In the description so you can skip to what you want to see.
Got a real chuckle in when you were looking at the mask like " what the fuck is this"
Taylor Ray - great suggestion. The intent of this video was great - but the execution is lacking. The guy that made this video should Keep on trying and refine his process.
At 15:52 a flat cut through aluminum that's why "the earth is flat"
Suggestion for your welding table. Take half of your table and replace it with a bar grading. It will be helpful when you are welding and/or cutting. Your cuts would be better and you can ground direct to the table. Go to most welding shop or machine shop with a CNC Plasma Cutter or water jet cutter, and you can see that they use bar grading for their cutting table.
Good video, bubba.
P.S. You may want to invest in an auto darkening hood.
Is anyone else yelling that it's a welding helmet, when he says what is this and picks up the glass lol. That made my day.
Maybe he was joking with us.
A poor excuse of a welding helmet, but yes I was yellin' with you !!!!!!!!!!!!!!!
What a nimrod
So badly I wanted to tell him he was supposed to strap it to his feet to keep the sparks out of his shoes.
@@MakinEndsMeet69 That is a fact! Also, did you notice how he is dressed and that he left a precision instrument (digital calipers) not only on the same table as, but in close proximity to, where he was performing his "?tests".
A few pointers from someone who bought their first plasma thirty years ago when even the dealer didn't know much about them. 1) you don't need to be using a grade 11 welding glass, gas welding goggles are dark enough and you'll be able to see just fine. 2) make sure that your air supply is super dry otherwise you'll chew through consumables really fast and they're not cheap. 3) plasma cutters don't like layered pieces where there is an air gap between the layers. The arc breaks through the first layer then spreads out, fails to penetrate the second layer and blows crap back into the cutting head. 4) Aluminium sucks the heat away and the part you are cutting gets freaking hot, unlike steel parts. I learned that one the hard way having got used to just cutting a part then picking it up with no gloves on! 5) You can use thin plywood to make patterns and use them to guide the torch because the heat is so localised. 6) not sure how true this is but it makes sense; plasma cutters generate a lot of NOx and breathing that isn't good for you.
I too was on the fence with this, you have convinced me to go buy one, thanks!
Great comparison of different machine cuts! Really enjoyed your insightful video. Thanks for putting it out there.
Couple things:
1) Dry that air. Don't use standard compressed shop air, it'll eat your tips pronto.
2) That's not a drag tip. You should be cutting with the tip roughly 1/8" above the workpiece at all times. Your tips will last longer, and you'll get cleaner cuts.
3) Adjust your air for the minimum you can pass and maintain a clean arc. There are good tutorials on how to do this tuning.
4) As Alan Summerscales said, never run it wide open, 'just because'. It's adjustable for a reason, same as a welder. Use the minimum amps required to achieve the cut for the thickness and material you're cutting. Same as with the air flow, above.
5) It's dark because you're using a welding helmet. Plasma cutters need their own shade of lens, typically around a #4 or 5.
@TJP 81 Seems reasonable. I just cut by eye. If I'm getting a clean cut, it's good. If it's splattering, I dial it back until it looks happy and still cuts through at the rate I want to move.
You can run it wide open that just means your travel speed can be a lot quicker...For life of tips and consumables and wear and tear and the machine though and if speed is not a factor then you are right, better to turn it down to compensate for material thickness...this thing SAYS it will cut up to half inch thick which is not very thick and im guessing trying to cut through half inch is going to be painfully slow, so you are probably going to be running this thing wide open 24/7 unless you cutting sheet metal.
Great tips for novices like me thanks. What about amperage, is there a rule of thumb based on thickness and material type?
When I had my shop I had a Lincoln plasma cutter,it was a three phase machine and had just two current settings on a switch 30 amps and 50 amps anything above an eighth of an inch required 50 amps which would take you up to half an inch. Most of the cheap units are using the power section from chinese tig welders,well all the one I have tried,I think that is one reson they have the current adjust knob.
Wow, that's really nice of you. Thank you for the helpful info. I learned something.
Cut 50's are pretty good for a cheap cutter, the trick is to keep your air as dry as possible, it'll cut better and also consumables will last longer. Grab an old 44 galon drum and an old shelve out of a house oven, bingo! new cutting table, all the sparks and slag will collect in the drum.
🥁 👨🏻🏭 💥
yes I use one of those toilet paper air filters & another kinda like the one you got ...Lots of humidity in FLorida....also know that the cutter will cut ANYTHING for a second...Gloves hands etc. LoL...also I just used cutting glasses not welding if thats what you used...cool & they pay for them selves in few jobs! Also great for SS cutting!
I had a Cut 50 that worked fine for a while but stopped working. No way to get it repaired and no schematic to try and figure it out. I opened it up and the build quality was horrible.
Yup. Mine is 2” x 1/4” thick sitting vertical wield bar and space the strips out for the grill part.
And a great start up welding table
This was a fun video. I thoroughly enjoyed it! I liked it when you figured out what the folding welding helmet was. All fun aside, great video, nice shop, great video presentation. Thanks!
Great review. A lot like the guys I know just out there trying stuff out and seeing what works. Definitely like the comparisons between the different cutting tools. Great job
For really straight cuts you can clamp a piece of angle iron to the work piece and run the plasma cutter down the straight edge.
scrolled down to find this, real tip right here taylor
If you use a peice of cardboard you won't cut it up because It only cuts through metal not paper or cardboard
@@thomasjohnson6860 you wont cut your guide because your not running the plasma over it, cardboard would burn
I was thinking the exact same thing, use a cheap sacrificial c clamp that you dont mind risking it getting ruined and make a fence to guide straight cuts.
John Brew I came here to say this.
i watched the whole video, just to see if he would figure out, the glass and that weird piece make a welding helmet when put together lol
laurie gallant I was thinking the same thing ! How is it not obvious it's a mask ??
@@christopherdrekr1078 I think perhaps he's joking. Those cheap masks are so stupidly awful, that you could be forgiven for not knowing what it was.
@@napalmpig3772 - it's NOT a mask... it's a shield. Nothing more is needed for this product.
To be honest if you don't already have a mask & you don't use it all the time it's perfectly serviceable. I've used a mask probably exactly the same for about six months, it's not got loads of loud graphics on it but it does the job. At least they include something that does allow you to use it without burning your eyeballs out.
I was laughing that he didn't realize it was a shield and the lens for it.....
Thanks for the effort & time you took to make this product evaluation. Interesting to see the perspective of someone who has never used a plasma cutter before. More realistic than an expert, making perfect cuts or dumping on the machine's performance, because it is a budget item. Keep practicing & try running the cutting head along a guide bar on flat straight cuts for accuracy. Also, a dedicated cutting table with a simple & strong overhead bridge arm, to which can be a fixed adjustable height mount on the cutter head pointing down onto a flat cutting table with a hole below the cutter point. You now have a precision coping table, just slide the piece beneath the cutting head, along the desired cut line. clean cuts at 90 degrees to the flat side, with a little practice. Thnx for the unbox & test. Cheers JASS
Just an afterthought, perhaps a small frame on casters as a floating bed for your work piece. To avoid becoming caught on burs on the underside, as you guide the piece beneath the cutter. Kind of manual Analogue of C.N.C. Except, you will be moving the entire bed as the cutter remains in position. A bit vicee versee. But you have to turn things on their head to truly innovate. That's my way of thinking, anyway.
A bit like the Origami Welders mask that came with the cutter. In a pinch, it will do the job. Albeit, improvised.
Good honest video, thank you for the info. I’m thankful this plasma cutter works. For my needs this will be fine.
good day young man, I`m a welder, retired, so when you cut with a torch, oxy-acetaline, oxygen, plasma cut left to right or right to left this will allow you to cut straight and see properly so you can see where your cutting and see how far you torch head is from what you are cutting and always clean what you cut and weld, wire brush, scrape or blow of with air. I like to carry a piece of aluminum with me in my welding truck at all times and place it under my cuts as aluminum is such a good heat sink, and if you are cutting over cement floors the cement will blow out from the slag heat, the aluminum will protect all surfaces and clean of easy {slag won`t stick, and wear protective clothing, ps i laughed when you didn't recognize the supplied welding helmet. good luck
Left to right or right to left is not how to cut with plasma. When possible always pull the torch toward you. You will find you have much better control.
Marnie Larocque...
It’s called concrete...
cement is the ingredient to make
concrete... comprende
@@slickguns819 lol, yes concrete, i admit dumbing it down, but my point is correct, the mixture in the concrete can and does vary a lot, the finished and cured concrete varies greatly, from heat resistant to very high in strength. slag from melted metal can cause the concrete to react explosively
Marnie Larocque... lol sorry
I’m a Concrete Tech./HDPE welder Did not mean to correct you it’s just that my wife is huge on terminology...lol
@@slickguns819 - I better straighten out this cement/concrete issue in case my wife reads it...?
Taylor: *Holds up piece in middle of camera to focus on*
Autofocus: That tire rim all the way back there is far more interesting.
"Focus you fack!"
Super helpful video - exactly what I was looking for. Thanks for taking the time and for sharing.
could you maybe do an update on this thing? It's been over a year now and I wonder how its held up.
bump
Ditto
Bump
Yes please
Yes please
Great review. Perfect for a once-in-a-while plasma cutting that I might want to do. May get one myself.
Nice comparison of the band saw/grinder options as well.
Thanks for the thorough, real-world review. I'm always torn when I read Amazon reviews- I think many users just don't know what they're doing. This video really helped with my plasma cutter purchase decision.
Thanks for this video and also showing the difference in the different types of cutting
Thanks for going over all that. I've been a carpenter most of my life.
It's time to do metal. Awsome video.
Your changing hats! good for you . I'm a carpenter but I love working with steel. Welding skills took a dump after my brother finished his welding school. I just step back let him do his thing now. Wish he would step back for me . when im asking for his help building something.
To cut great circles; cut sample pieces from different sized pipes, maybe 7" tall. Then clamp them to the steel you want to cut a circle out of. You can even cut them slanted rather than square to make ovals. The pipe diameter should be smaller by the same amount as the dimension from the center of your arc to the outside. Then use the different diameter pipes and trace them. A little practice yields great results. Try turning your work instead of the torch. Also, try moving the plasma cutter FASTER for less slag. Great video!
I bought one of these 5 years ago and it's still going strong. Made me many multiples of the amount I paid for it 😊
Got a link for this product?
@Nonya Bizness I believe he was referencing that he bought this model 5 years ago. If so definitely a worth while investment for hobbyists
Great info! Thanks. For the guy who isn't using it every day all day, it looks like a nice tool.
I have used 1/4" MDF to make templates to cut round holes and odd shapes, works well for short term repeatability.
When cutting aluminum with any blade, I use cutting wax, it keeps the aluminum from loading up in the blades and allows faster cutting.
Pretty cool, I'm impressed with that plasma cutter, I might get one. Thanks for sharing.
Outstanding review. I'm getting this one now, For pipes and brackets and stuff for my dirtbikes and race bikes and car projects and stuff.Thanks
Enjoyed the video but I have lost my voice over it from yelling at the phone 😱 "that's a welding helmet" 😭
All kidding aside, great video
I'm a metal worker by trade. Welding and cutting is about all i do. Make yourself a cutting barrel/table with 2" or 3" wide strips of 1/8" or 1/4" on edge 2 in appart. so your work top is replaceable easily and allow everything hot to fall down and not burn everything. Also make yourself a mini pipe vise/clamp with 2 piece of flat bar and a piece of angle on edge making a "V". And about 1/2" back from one edge notch out a V in the angle iron on both side across from each other and about half the width. I can provide pictures if needed.
Aaron Okamoto ..... could you please post or send me some pics of what you describe. I am reading the comments and others have mentioned this but pics would help more.
Aaron, could you please post a short video on that setup please ? sounds great to share with all
Thanks for sharing your successes and fails in fabrication +building.
Thanks. I have been wondering about these 110 V units. I think you will find that turning it up to the max and leaving it there will be best for everything.
Great video for what you intended it to be, a comparison. Thanks, wish I'd have bought one sooner myself !
13:21 You can still ground to the table and just hang your cut on the edge of your table. Hopefully what I'm saying makes sense... Just make sure to hold it down with any sort of clamp of your choosing.
Yup clamp your shit to the table hanging of the edge.
Some really good comments here. nice review. sometimes I get annoyed by so called expert reviews, at least this guy is more like your neighbor trying shit out.
why aren't you as perfect as me? I know how to be perfect = those comments
Just bought 50 amp Everlast from Amazon and 3 stage reg cleaner hope it works out but I know you got have clean air and enough of it
Yes. I liked him instantly.
@@barbarasteed3966 does it cut thick ass metal? H!!!
Would love an update on how the plasma cutters been working after a year? I'm just an enthusiast here working on my rusty TJ but really tired of cutoff wheels... Great comparison of value minded tools for folks with limited garage space.
Same here
YES
Agreed
Great video and review, thanks for doing this.
Taylor, you can but tips with stand offs machined in so you can literally drag it scross the work instead of trying to keep a short distance..... Also hold a piece of angle on the work and drag against it for straight lines 👍🏻
Looks like a good unit for the money ... look at the lines on the end of piece you are cutting it will tell you if you are moving to fast or not ... lines should be about 10 -20 degree angle in the direction you are cutting ... I build controls for Cnc plasma tubing machines so I needed to set up speeds and feeds on them... also use a piece of angle as a guide to cut straight lines guide the tip along the angle
I've been out of the industrial scene for quite a few years. The video is cool definitely a great step in the right direction for me. Be good man keep it up.
I bought my first plazma cutter in 1997, a Thermodyne 50. Still works great. Most important tip for nice cuts is to use a straight edge or pattern. riding the tip along a peice of steel strap will produce much nicer cuts. I had a bunch of round holes made from masonite to make a pretty clean round cut. your pattern must be bigger to allow for the tip offset. it is also best if you practice a steady speed. My old machine cost $2600 back in the day. used my son's HF machine a few weeks ago cuts exactly the same. Yeah for modern electronics.
Need to make you a cutting table I’ve seen them made from expanded metal or metal gutter grates!! Then you can clamp to the table and everything is grounded!💯
At my school we made one from a barrel and some pretty thick flat bars
love the demo of these tools. have you looked into using cutting oil/lube with the bandsaw? i highly recommend it on any metal. it will speed up the cut a bit, and preserve the blade
The nicest I ever saw on a automatic feed bandsaw was a "micro drop" lubricant system that used compressed air and vegetable oil. The chips could be swept up from the floor, the blades lasted as just long as with a heavy flood of water soluble oil coolant. www.accu-lube.com/en/products/lubricants/
Great review! Good to know I could get a completely functional plasma cutter for such a great price.
Great review. I appreciate this very much considering I'm actually less experienced than you were when you first unboxed the plasma cutter. Haha. Cheers!
We used aluminum rulers as a straight edge to move the tip along in shop class. Works well for straight cuts, and you don’t have to worry about seeing the mark
Ive found if you remove the exterior case and clean the paint off where the ground is mounted and also run a jumper ground from the front to the back it will work alot better. I loved my Cut 50. For the price you cant beat it.
Great video! This guy was just showing how well this cheap plasma cutter worked. This isn't a tutorial on how to be a pro at using the plasma cutter.
I'm not sure if anyone has said this in the comments, but use the straight edge of a piece of scrap steel as a guide to run the cutter along. You'll get the straightest cut line possible.
..and thank you for the video. Appreciate ya!
Correct
use a straight edge as your guide, and do way higher power. you can REALLY zing along fast. Also use the tip guide, you dont want to drag the tip on the metal, You want it to be just above the workpiece.
Used a plasma cutter quite a lot myself and my one piece of advice would be full power all the time. Vary your cut speed rather than power
I was thinking the exact same thing while watching lmao.
100% agreed
For thin metal defenetly turn it down. There is no need to have it on 50amps for thin stuff. Your consumables will wear out much faster when set on max power and your cut won't be any faster couse you can't keep up with it anyways
@@mackbreakerpuch thats what i was teached as wel. If your plasma dosnt have any metal te cut in front of it it wil cut the consumables. So as long as you can feed it enough you can run it on full power. But with sheetmetal you prettymuch need to run to keep it fed. Its possible, but it wont be precise.
@@mackbreakerpuch h
Yep, researching plasma cutters after surgery today, thanks to a 7” angle grinder that bucked while removing an impossible control arm bolt. Luckily only a “small cut,” but still got a tendon. A word to those as dumb as me: If you can’t keep both hands fully on it, don’t use a big ass grinder.
I picked up a similar Cut50 from Amazon a couple of years ago and have used it on several projects with excellent success. Great little machine for the price but it is scratch start, meaning you have to touch the workpiece with the tip to initiate the cutting arc. I use a piece of 3/4" x 3/4" angle clamped to the workpiece and offset appropriately as a straight edge. These things cut through sheetmetal like a razor knife through tissue paper and leave a fairly straight edge to weld in a patch panel with only minor cleanup, much better than a cut-off wheel on a grinder. A multi-pack of consumables is available on Amazon for $10-20 so continued use of the cutter will not break the bank any worse than the initial purchase price.
I am looking at setting up a CNC plasma table but unfortunately, the CUT50's scratch start means it will not work because it would have to touch the part to initiate the cut. If you also want to eventually use your plasma cutter on a CNC rig, you will need to step up to the $400-700 plasma machine with a pilot arc (non-contacting start). The CUT50 is a great little machine for the price if its limitations fall within your intended use.
It's possible to follow a line drag cutting. Lower your tint (most glare is on the undercut) and offset your marks.
As the head is round draw an offset circle with a larger diameter and the edge of the head will follow your lines as your viewing reference circles the head (once you hold it straight).
Protip. Mark up with a glitter pen and your lines will reflect in the arc.
@taylor ray........you need to not rest the consumable on the work peice! It should be spaced between an 1/8 - 1/4 above material........also when wanting a straight cut use a straight edge....I use to use a peice of 1/8th inch x 1 inch bar clamped to material and i rested my consumable either on that or against that. Also the quality of cut will improve when you are able to maintain a constant speed! Spacing and speed are very very important. Number one......DO NOT REST consumable on work peice the flame was not designed that way.....you will end up with blow out on the back side! Do some research you'll see.
There are two types of tip... drag and non-contact. My Thermal Dynamics came with both types.
@@scowell yes you are correct but I am assuming the CHEAPEST plasma on Amazon does not come with ANYTHING extra they have that unit set up for beginners and you def not going to receive anything top notch or name.brand or anything above n beyond......so with that knowledge I would say it's safe to assume he did not receive a drag......bc every one I've opened form Lincoln to Hobart to Miller to cheaper no names none of them came with a drag tip. I can also see the way his is convex to a flat point that is a no contact tip. But hey I was wrong once
@@richmonsmith9308 My cheapo CUT50 dual voltage from EBAY did have a set of drag tips, and a standard tip.
I smiled at the little brush/hammer. I have one of those that came with my Harbor Freight flux wire welder I carry in my truck box. lol This cheap little unit looks like something else I may have to get to carry around. Thanks for sharing.
This is a great video. Thanks for sharing the experience. I've been wondering if the plasma cutter would be okay as compared to some of the more commercial ones I've used.
Dont cut it above your work table. Let it hang over the edge so the sparks go to the floor. Otherwise it will booger up your clean work space.
Also, that hose on that tig machine is a generic 1 piece hose for an air cooled torch. The more expensive machines like you talked about have either a 2 piece torch head (one air line and one for power) or a water cooled torch head. And usually the lines are in a protective sheath that zips up.
Also, getting a name brand plasma might be worth the money. I have the miller 625 extreme. It's a $2k machine, but can be found used for $1500-ish. It does 110 or 220v as well as finding consumables for it is really easy. Plus you can put different cups on it for different uses, as well as being able to drag it, making it easier to use and smoother cuts
I was yelling out , “it’s a mask “like it’s blues clues or something. 🤦🏽♂️
Omg! That is the funniest true comment yet!!!! Ha i love it so true!! You are hillarious👍😂
This nigga said blues clues LMAO
🤣😂🤣🤯🤯🤯
Hahaha
Lol I love how you put the welder thing on the camera! Good stuff.
i use a strait edge and run your torch along it.. i also use 1/8 plywood patterns for complex shapes
you only need shade DIN 5-6 for plasma cutting, adjust your helmet or get a helmet that can go lower
I paid $600.00 for my Harbor Freight plasma cutter 5 years ago. Love it!
Awesome video. I’m glad I found your channel. Your work with brother Cleetus lead me here. 👊🏻👊🏻👊🏻
I wasnt even planning on sub. Such a good review I subbed to your channel. Great review man, I felt like I went over to my buddies house and him telling me about it.
Which brings me to the cut-off wheels and grinders you dont like. Im 51 and about 5 years ago one of my best friends (friends since childhood) was cutting something from under a truck, the wheel came apart and severed his carotid artery and he died right there in a split second. Ive had one come apart on me since then and hit me in the top of the shoulder. So about 4-5 inches over and it wouldve hit me in the neck.
A wide slaggy cut is from going too slow.
You'll get the hang of it with a good manual.
Cool video and lots of good info. Thank you! There was one contradiction that stood out for me. In the beginning, you said the quality of welders has improved alot over the years and you wanted to see if the same held true for plasma cutters. Then in the end, you said you would have bought one years ago.
I love the plasma cutter! So quick and fuss-free. I remember seeing a steel-worker on UK tv a year ago, cutting intricate little shapes out of thin sheet-metal. His cuts were so clean and accurate, it was incredible! Can anyone tell me how that is done?
Great vid, just the info you need if you have not used a plasma and want a DIY unit. No point having someone with 20 years experience and a 2k machine telling you it's the way to go. Thanks for sharing this with us.
Use a straight edge for straight cuts and you can make an adjustable arm reminiscent of a compass type tool to cut larger holes.
Yup, I have done that too. Makes making circle much more accurate.
Washers of all sizes are handy, tack it on then cut it out.
My first 10 minutes with my plasma cutter, I cut out Scooby Doo while waiting for my teacher to come back from a beer run....lol
LMAO.
AH , the Beer Run !!
Brings me back in time to my 3rd year as an electrical apprentice.
JW I worked with parked his van opposite the job trailer and Foreman and I went for a case of Budweiser around 11:30am for our "Lunch"!!! 🤣
Killer video, I was wondering about this and you've made my mind up, I'm going to get this soon.
Thanks for your guinea pigging this out. I really appreciate it.
By the way you have a new subscriber 🤘🍻
All the power in Australia is 240 volts standard and our high voltage is 3 phase at 415 volts, love plasma cutters, freaking awesome machines 👍🏼👍🏼👍🏼👍🏼🇦🇺🇦🇺🇦🇺🇦🇺🦘🦘🦘🦘
15:32 I just want to say... literally everything is a quick cleanup with a Flap wheel.
Right off the bat. plasma cutters cut rusty stuff, too. that's why i really like plasma cutters.
Three things that would help make you have much cleaner cuts with your plasma cutter. (1.) Adjust your air up to a higher setting to eliminate the drouth (the stuff you think is slag). (2.)Use a straight edge to drag the torch beside to make your cuts straight and (3.)Use a spacer clip on the end of your torch to keep it constant at 1/16" above the surface of the material you're cutting. You can also eliminate the drouth by controlling the travel speed of your torch.
Thanks for testing this tool and the great video. I have wanted one of these machines for years and resisted because of price and not needing one everyday. I don't trust tools made of chinisium but the price makes it realistic for what I need. You have a nice shop useful neat but its not an operating room. Glad to see your work.
A good pair of dark sun glasses will suffice as there isn't much UV from the arc. I own and use a plasma cutter and find that the limit is 10 amps per tenth of an inch and I run the air between 60 and 90 pounds per square inch. 60 psi up to 1/8th of an inch and proportionally up to 90 psi up at 1/2 of an inch thick. See if you can find an in line air dryer and use it between the regulator and the cutter... it will stop the burbling sound. You can make and use wooden templates to use as a guide because the heat is blown away from the tip. BTW, keep the surface you are cutting clear of paint and rust. It makes a cleaner cut. And get yourself a pile of consumables, tips, swirl rings, electrodes and ceramic cones. The better the conditions, the better the cut.
If you cut very much sunglasses do not cut it. You will damage your eyes with most. Use a #5 at minimum.
Your pressure will depend on your nozzle and flow. Careful not to go to high with pressure. It will ionize less especially with low amperage like 50A.
I'd like to see a video about how it works after a year or so of use, very curious to find out
Thats a $200 machine
I have one for 3years now
I have had one for 6years and still works like new
Actually a 3 in 1 welder also
Doesn't miss a beat
@@alansummerscales3376 mine is a cut 50 accurate tool
just had to get longer welding cables
After 6 months of use, it's probably paid for itself. throw it away and buy a new one.
@@cmscms123456 the American way, now days everything is disposable... Not like the old days when you could buy a tool made in the USA, & beat the hell out of it and pass it on to the next generation, and it still gets the job done! But I hear ya, for the price vs. Quality it will get enough work done to pay for itself.
I agree about the subaru seats, ive been turning them into office chairs for years.
You sure have come a long way since then. Congrats!
I love my AHP. I weld day in day out with it. Just add a cooler and you're set.
OneHundredYen what did you do for a water cooler
@@11trevord build one look up diy water cooler for tig juscoz Customs has a good build documented on you tube
TD Engineering This Old Tony has a video for a tig cooler.
You should be proud of your efforts to allow others the benefit of your experience. Keep up the good work. Thanks for here in the U.K. 🇬🇧
I love having a plasma cutter. It makes cutting a lot of different materials so easy and quick.
Yep, im convinced i need that tool. Thanks!!!😊😎😎
Clamp a piece of angle on the work piece as a guide, and move faster!
Much cleaner cut when you move as fast as your amps will allow.
Great video!
Or save your stash and cut stuff like this with your high speed angle grinder and a good diamond blade. Cuts like butter.
Thanks for the demo man, will definitely consider buying one for my home workshop too. Guess it doesn't pay to stick to the good ol' grinders. Cheers mate.
thanks for an informative video on a cheap cutter that works ,i got it on my list.
Just a tip, when I cut with the plasma I go much much faster and also clamp a piece of angle iron to use as a tool guide for straight line cuts. You need to turn your air down too, and raise your tip as it’s not a drag tip you’re using.
Plasma cutter is not like laser or water jet cutter, they are designed for fast and efficient cutting purposes with reasonable cutting accuracy, I like to have one, not much use of it but I'm a tool lover no matter what.
WHAT!!! Put them on a CNC table and the cuts are accurate.
A O I too am a tool lover...call me
valveman12 not so true, due to the arc in plasma it actually cuts through at an angle and the thicker the material the more angle the arc has, gas cutting on cnc is more accurate, I have used both
@@BESHYSBEES Sure and I agree if cutting really thick material.
I'm a cnc operator for a living with both plasma (ranging from 30 amp to 200 amp) and Oxy. I agree that plasma is very accurate, most cuts within millimetres, if not smaller, howevee the Oxy (at a much slower feed rate) always does a much cleaner and accurate job
When I got my plasma cutter I didn't read the instructions and used Teflon tape on the regulator fittings . The plasma cutter didn't last long it died and refused to turn on . Then read the instructions it said don't use Teflon tape on plasma cutter as it sucks the Teflon tape off the fitting and into the lines of your lead torch blocking it to death.
I work with plasma cutter all the time . Rust , water 💦 coming from air tank won’t plug a plasma pieces of Teflon won’t hurt it
Stupid
@@armandosanchez152 You ment to use a water trap with a air filter on a plasma cutter so that your compressors dirty habits dont kill it
@@Migman2020 that's in the filter/regulator he fitted to the back of the machine.
Sounds about like something any man would do,exactly what I would do,throw away those damn instructions until it breaks,then find troubleshooting section.😂
thanks for helping me make a decision. I am buying one!
Love the wheel tyre combo on your truck!
When you’ve never seen such a cheap face shield you can’t even make up what it is lmao 🤣
The foreign countries I've been to the people can't afford the nice helmets we buy and they have a cutoff broom handle they fasten to it and they weld or cut one handed and surprisingly they do very well.
I have basically the same plasma cutter and I've never set it up. Think you inspired me to go do so.
I will say you can get a tip guide so your cut is flat and you can also use straight/curved pieces to guide the tip and get nicer cuts.
Cool video man! Glad the channel is doing well.
Great video, very informative!
Great video!!! Thank you for the information 👍👍👍
Taylor Ray saves the Day! I’m sitting here bored outta my skull so I decided to Ck CZcams and what do I see? A 30 minute video from Taylor. Awesome. 👍🏻
Sarcasm noted. What everyone actually says is "fuck, I am bored watching a 30 minute video from some idiot named "Taylor" that could have been about 5 minutes long if he ever got to the point.
It's been a year, I want to know how it's held up? PLEASE RESPOND.
what he said! long term review, please
Yea cmon we need an update before we buy
Yes!
Yeah usually people just make videos when they first get it, thats not nearly as helpful.
On cheap equipment, if I know it needs to last, I buy the insurance plan.
I've been an AutoZone customer for a very long time and really enjoy the people who work there at the different stores I visit from time to time. Also have a great respect for their employees who put up with my bad mood when the wheels on my ride are not rolling. If you had gone to work with them, I'm sure you would have second thoughts.
I've always heard it was called a tack shield. You hold it in your hand so good long welds are possible but not the easiest so use that shield for tacking.