I’ve had this mount in my tacoma, on a vertical surface, for about a year now. still holding strong. i deliver food as a part time job so i’m constantly using my GPS to get to people’s houses so i’m placing and removing my phone from the mount constantly for several hours over several days. i apply the metal plates directly on the back of my cases and it holds much better than between the back of the phone and the case. i recently upgraded from an iphone 7 to iphone 8+ and the mount still does a great considering the bigger phone. you can also buy an additional set of 3 metal plates on amazon for about $8. By far, one of the BEST automobile accessories.
I just purchased that brand with a suction cup for rental cars when I go overseas so I can make it flexible for my use. My cell phone company I use sells them as they’re a good brand.
I just bought my second one! My first was mounted vertically on my Monte Carlo SS for app. 7 years without a problem. Just take time deciding where you want it. Make sure area is level, no uneven surface. Clean area real good, press on well and install in normal temperatures. And wait about 24 hrs before putting phone on it. I liked it enough for my new Altima coupe.
You should have found a way to get all the TV's to play it! I think this is probably my best video. Thanks for watching and I'm glad you liked the mount. I still have mine. 🤘
I love mine. Super strong magnet too, almost so strong it began to peel back my Spigen case every time I removed it from the mount haha! Curious if I can use it for my new iPhone 12pro max tho
decided to mount on left side of windshield so as to minimize looking away from traffic. made sure i had room for portrait and/or landscape positioning. really like it.
I watched about a dozen reviews for this mount. For most of them, I had to put the speed to 2X and it was still slow and boring. Others had a language barrier. Yours is the most intelligent, articulate, and USEFUL review on CZcams. I really appreciate the tips to get double sided tape to last. Super job!!!
Thanks! It's one of my first videos and probably my best, but don't let that stop you from watching all of my videos! You be the judge! Thanks for watching!
OMG, it took all my strength to get it out of the box as you said! I ended up using my good fabric scissors....the other alternative was to get the chainsaw out!!!! Thanks for the tips....appreciate you posting this video :-)
Thanks for the review. I bought one of these and best tip I picked up on was to mount it on a horizontal surface. In my eagerness I set the magic plate on the inside of my phone case, should’ve done it to the outside but the XS Max still holds 🤙🏽
I have one of these that I've been using for years. I have the plate attached to the outside of an OtterBox case instead of inside the case like he shows in the video and I have had no issues.
Criss! Outstanding question and good catch!! Lucky for you, all your answers are in my videos! Check this out. czcams.com/video/dDmmtQY5acs/video.html Don't forget to watch Part 2 and subscribe! Thanks for watching!
Love the review, Sir. 💚👍🏽 Quick question. ❓ Do you know if the magnet will drain the battery life of your phone and/or interfere with the cell phone signal? I have a friend who is an IT professional and warned me about the pros and cons of this product. What has been your experience with it when it comes to those concerns that you know of. I appreciate your help. Take care. 🤗📱🚘👌🏽
That’s a good question, Zanetta. I’m not exactly sure. I have been using this mount for about a year and my cellphone is two years old and showing signs of a weak battery. I’m not sure if the mount contributed or my iPhone is just old and a pos.
i have an iphone 7 with the otterbox defender case. which is the case with the plastic shell and the rubber outside with the plastic built in screen protector. if i were to stick it between the rubber and the plastic shell would it still fit through?
I actually have one that I've put off applying because I drive a 2012 Durango Citadel and I'm not sure what is the best way and place to put it at.... any advise???
@@ExtremeDailyDrivers wow that was fast.. thank you for replying back... watched your video twice... I didnt have to pull out all the heavy equipment to open mine.lol ( just kidding, that was actually a cute joke you threw in there). I really appreciate your help and the fact you took the time to help. Thank you
I'm sure it will, but i would probably experiment on metal backing location. Mine is behind the phone case, which weakens the magnetic strength, but holds my Iphone with no issues.
Yes I totally agree with you on that!!! Reading the instructions just makes things seem more Complicated then it needs to be! Your video was really helpful 🙂
sadistic spirit take a piece of dental floss, and work it around an edge. Once you have enough lift, pull it up with a credit card edge. It’s tedious, but at least we know it won’t come off :)
It was hard to not notice the ample girth of that. I wonder if he's left-handed, and is the right one quite a bit smaller? I'm not gay, but I do know Rosey and her four sisters.
@@ExtremeDailyDrivers nice. i just got one. so the adhesive is strong enough too? im wondering if it'll walk its way off the mount with the road motion. im thinking the pro mount would be better. wow that was 6 years ago? lol since you responded im subscribe haha ;)
@@justaguy4real I've never used the Pro Mount so I can't say, but if you follow how I installed the mount in the video and you don't mount it in a position where the mount will be fighting gravity it should be solid for years. Thanks for subscribing!
@@ExtremeDailyDrivers so its still holding strong, or have you replaced it by now? and did you leave the metal plate on inside of case, or relocate it? seems the metal to metal is a much stronger hold. I'm looking at the magicmount pro with the 6 magnets as well. phones today are a bit bigger and heavier than iphones 6 years ago. what do you have now?
@@ExtremeDailyDrivers NO! I just put the large magnet between the rubber piece and plastic piece of the Otter Box case. It doesn't exactly stay in place on its own because it doesn't want to stick to the rubber but carefully put the two pieces of the case together and that hold it in place. Then I put the smaller one on the outside of the plastic piece directly on the back of the phone case giving it two magnets and that seems to be working okay.
The sticker you install before the metal backing piece is removable. So you can remove the backing piece with leaving sticky residue all over your phone. I hope that helps. Thanks for watching!
Better to put mount on dash first and check call size to make adjustments. Also that shield you pull off didn't stick to the cell and came off so my fingers totally contaminated both sides. Hate the instructions so poorly written and had to get a magnifying glass to even read it!!! Sucks, all the way around.
@@ExtremeDailyDrivers It’s an iPhone 11. I think it’s just not compatible with Otterboxes. Or at least, I might have to mount the magnet on the outside of my case, which I was hoping to avoid.
I would ditch the Otterbox. It's like surrounding a Ferrari with a bunch of tires. If you must keep it, yeah, you need to have the magnet on the outside.
I took one look at the instructions and thought, i bet someone explains this real well on the CZcams.
I hope this video helped! Thanks for watching!
There is always someone for us at CZcams to show us what we need to learn!
hahah same here mate
"After using a blowtorch, a jackhammer, and a reciprocating saw..." - made me laugh out loud at work.
Me too! - HATE that packaging!
You always have to beware of your surroundings while doing non-work goofoffery while on the clock.
All the tools you use to open the adult proof plastic was hilarious 😂
Thanks for the instructions, simple and to the point!
Glad you enjoyed it! Thanks for watching!
The fact that you had a hard time opening it up too😂😂 Thank you for this video🙌🏾
I’ve had this mount in my tacoma, on a vertical surface, for about a year now. still holding strong. i deliver food as a part time job so i’m constantly using my GPS to get to people’s houses so i’m placing and removing my phone from the mount constantly for several hours over several days. i apply the metal plates directly on the back of my cases and it holds much better than between the back of the phone and the case. i recently upgraded from an iphone 7 to iphone 8+ and the mount still does a great considering the bigger phone. you can also buy an additional set of 3 metal plates on amazon for about $8. By far, one of the BEST automobile accessories.
I just purchased that brand with a suction cup for rental cars when I go overseas so I can make it flexible for my use. My cell phone company I use sells them as they’re a good brand.
Thanks for the feedback!
Came here for the reviews, left the video thinking about how I need to start doing more bicep curls!! Nice arms man!!
😂🤣
😆😆😆😆😆
My favorite part is how you got the product out of the package lol. Thank you for the informative video!
Anytime! Thanks for watching!
“I gotta backup my iPhone” 😂👏🏻
Man i really love this channel! I've learned so much in just a week
#greatestcommentever
It worked like a charm. Thanks! Came right off!
I just bought my second one! My first was mounted vertically on my Monte Carlo SS for app. 7 years without a problem. Just take time deciding where you want it. Make sure area is level, no uneven surface. Clean area real good, press on well and install in normal temperatures. And wait about 24 hrs before putting phone on it.
I liked it enough for my new Altima coupe.
The one I installed in this video is still holding. Thanks for watching.
Thank you ..Clear and easy to understand
had mine for a year after trying 2 or 3 others by far this is the best.
Damn underrated video man. Good quality
Thank you!
Thanks I might get one, never had any luck with suction cup mounts.
I watched this video at Best Buy trying to decide which phone mount I want and I love bumping into this video cause I love this phone mount
You should have found a way to get all the TV's to play it! I think this is probably my best video. Thanks for watching and I'm glad you liked the mount. I still have mine. 🤘
Video content: excellent. Intro: ouch!
Thanks! It was like my second video. 🤷🏻
I love mine. Super strong magnet too, almost so strong it began to peel back my Spigen case every time I removed it from the mount haha! Curious if I can use it for my new iPhone 12pro max tho
I miss my Scion xBi loved that box
Those Scosche mounts are the shiz-nit. That's what I use! Thanks for the sub!
Yes they are! Thanks for watching!
1:05 LOL. Spoke for truth!!
decided to mount on left side of windshield so as to minimize looking away from traffic. made sure i had room for portrait and/or landscape positioning. really like it.
Nice!! I'm glad it has worked out for you!
in awe of the size of your schnozzer lad, absolute unit.
Lol. 😂
I will be getting one. Thx
I watched about a dozen reviews for this mount. For most of them, I had to put the speed to 2X and it was still slow and boring. Others had a language barrier. Yours is the most intelligent, articulate, and USEFUL review on CZcams. I really appreciate the tips to get double sided tape to last. Super job!!!
Thanks! It's one of my first videos and probably my best, but don't let that stop you from watching all of my videos! You be the judge! Thanks for watching!
OMG, it took all my strength to get it out of the box as you said! I ended up using my good fabric scissors....the other alternative was to get the chainsaw out!!!! Thanks for the tips....appreciate you posting this video :-)
Thanks so much for watching. Please “like” and “subscribe”.
good review and installation tips :) made me rethink where to put mine
Thanks Ryousuke!
Ryousuke Takahashi inital D... i like it
Love that watch
I still have that watch and it still works!
I like yo shirt mane💯💯
Great Review
Thank you, Mars.
super helpful thank you
Any time. Thank for watching.
👍🏽 How do you have a led light for your interior? Is it a simple bulb change?
Great video not sure I like the vent mounted feature though.
The best!
HaHa great video. I purchased one of these yesterday, installing today. Thank you for the tips.
Glad I could help. Thanks for watching!
Great review, I wondering where to mount mine now I know,
selwin linton Thanks! It’s still holding up great and use it everyday
I loved it....
just got this recently trying to figure out where i want to put it on my 2014 nissan sentra! any ideas! LOL
I love you for making this video. I would have done it all wrong... Thanks!!!!
Glad I could help!
Thanks for the review. I bought one of these and best tip I picked up on was to mount it on a horizontal surface. In my eagerness I set the magic plate on the inside of my phone case, should’ve done it to the outside but the XS Max still holds 🤙🏽
I have also upgraded to a bigger phone and it's still holding without an issue. Thanks for watching!
So it doesnt have to be on phone? You can do the magnet on the case? Confused where most ppl choose to do it
Just wondering how the mount is doing...I'm also driving a Scion XB 1st generation, I like the area you mounted the phone 👊😎
It's been a year in Florida's heat with no issues.
I was gonna buy one today. But I questioned how well it worked with a heavier textured phone case.
I now have a larger phone and a hard plastic/rubber case. No issues.
I have one of these that I've been using for years. I have the plate attached to the outside of an OtterBox case instead of inside the case like he shows in the video and I have had no issues.
This stand can support the weight of a Tablet "Samsung Galaxy Tab S 10.5" which weighs 465g?
Smart use of paint tape - thx
Thanks!
Nice Video!..Did your car come with that dome light with the glasses compartment or is it aftermarket?
Criss! Outstanding question and good catch!! Lucky for you, all your answers are in my videos! Check this out. czcams.com/video/dDmmtQY5acs/video.html Don't forget to watch Part 2 and subscribe! Thanks for watching!
DONE! just subscribed thanks for that really fast response!
You are the Man, Criss. Thank you.
Love the review, Sir. 💚👍🏽 Quick question. ❓ Do you know if the magnet will drain the battery life of your phone and/or interfere with the cell phone signal? I have a friend who is an IT professional and warned me about the pros and cons of this product. What has been your experience with it when it comes to those concerns that you know of. I appreciate your help. Take care. 🤗📱🚘👌🏽
That’s a good question, Zanetta. I’m not exactly sure. I have been using this mount for about a year and my cellphone is two years old and showing signs of a weak battery. I’m not sure if the mount contributed or my iPhone is just old and a pos.
Extreme Daily Drivers 💩📲😂🤣 Thank you for sharing your experience with the product in question and quick response, Sir. 😉👌🏽
I've been using this mount for years and have not noticed any issues due to the mount.
i have an iphone 7 with the otterbox defender case. which is the case with the plastic shell and the rubber outside with the plastic built in screen protector. if i were to stick it between the rubber and the plastic shell would it still fit through?
Either way will work fine.
@@ExtremeDailyDrivers ok right on. i hate having it show on the outside and want to know if it will work inside the rubber before i spend money on it
I have a S9 android with cover so do i have to use the protective film if I apply to cover instead of directly to phone
I think you'll be able to figure it out.
I actually have one that I've put off applying because I drive a 2012 Durango Citadel and I'm not sure what is the best way and place to put it at.... any advise???
Put it somewhere that is easily accessible. Don't forget to heat up the adhesive like the video shows you!
@@ExtremeDailyDrivers wow that was fast.. thank you for replying back... watched your video twice... I didnt have to pull out all the heavy equipment to open mine.lol ( just kidding, that was actually a cute joke you threw in there). I really appreciate your help and the fact you took the time to help. Thank you
Any time!! This channel is all about helping people and interacting with the community. Thanks for watching!
Do you think the magnet hold good through a rubber Tech21 case?
I don't know what that is, but you could always put the magnet on the back of the case or remove the case and stop dropping your phone. 😂
Will it hold with an iPhone 8 Plus defender case on it ?
I'm sure it will, but i would probably experiment on metal backing location. Mine is behind the phone case, which weakens the magnetic strength, but holds my Iphone with no issues.
I take it this doesn’t work on the iPhone 15 Pro? I just tried and I think to titanium surface is not very stickable.
Then put it on the outside of your case. Thanks for watching.
Would this work with an iPhone 13 pro + case
Yes
Do you Still think the same? I Just bought it so Im wondering Still working fine?
Gema Melendez It’s awesome. I use it everyday.
Does the plate on the back of phone interfere with wireless charger?
No
Can you still do wireless charging with that plate on back of phone
Sure
you need to put the plate lower tho
would this interfere w my magsafe charger?
I'm not sure. Ask magsafe.
How is it holding up today? Anything big or small worth noting?
I use it everyday without any issue and I have since updated my phone to a "plus" size and still holds fine.
I live in Texas, should I be concerned about heat degrading the adhesiveness while the base sits in the truck?
@@TeamBastos - I live in Texas also and have had no issues.
What if I wanted to move it to another better place?
Remove, clean, apply double sided tape and reinstall. Thanks for watching!
3:56 hey wait a minute... that positioning you're in... wasn't this a standard?
oops i accidently put the application on before the protective thingy!
Thank you for explaining it. Didn’t want to read the confusing instructions. 🙂
Yes I totally agree with you on that!!! Reading the instructions just makes things seem more Complicated then it needs to be!
Your video was really helpful 🙂
Good video though I hate the opening music (had to mute it) and the instructor talked too fast.
What head unit are you using in your Xb?
It’s the Sony DSXA400BT
Thank you for responding. I am looking to replace my stock head unit. What are your thoughts on it?
Adam Radford You can get a good head unit for $100 these days. I’m super happy with Sony. It has Bluetooth, which is all I need.
Does it work for tablets
Sure!
Is the pad adhesive bendable?
Yes it is.
It don't stuck. Keeps falling.
Omg u are on a sick one !!!! Slow it down a bit and BLINK .... 😆👀💨💨🏃
3:55 where the ..how the... Where r u SITTING!!!???
Trying to keep the energy up so you don't get bored! Thanks for watching!
How is it holding up ?
No issues. I even went to a much larger phone and no issues. This is still the best way to mount a phone in a car. Thanks for watching!
Bought it, two in fact, and it won't stick to my dash at all.
Heres a problem noone has how do you take the plate off its like a tattoo on a phone it wont come off
sadistic spirit take a piece of dental floss, and work it around an edge. Once you have enough lift, pull it up with a credit card edge. It’s tedious, but at least we know it won’t come off :)
Here I thought that intro music was fucking extreme and loud, then I saw the channel name lol
Lol. I've since toned it down. Thanks for watching.
Masking tape? Lol. You really couldn't remember that spot?? 😂
The idea is to have it centered, and believe it or not, even after the masking tape, it still wasn't perfect. Lol
@@ExtremeDailyDrivers Lol, I get it. The OCD is real. I'm the same way, if something is just a little bit off center it pisses me off.
Pro tip. If the double sided tape fails just get more and reattach it
If you install it correctly, it won't fail. Mine still hasn't come off and it's been almost 4 years in the Florida sun. Thanks for watching.
👍
Thank for the review, I recommend you not using this loud music in your videos.
Thanks! I have made the adjustment in the music.
Where can I just purchase just the plates to stick on another cell phone.
Drone Pilot Bob on their website
Check on Amazon, you can definitely find them there.
I want to see it after a week
Lol. It was on for 5 years!
My was on for 7 years!
I need to rewatch the video without staring at his biceps 😍
It was hard to not notice the ample girth of that. I wonder if he's left-handed, and is the right one quite a bit smaller? I'm not gay, but I do know Rosey and her four sisters.
Wonder if I can just throw my MagSafe iPhone on this
You won't know until you try!
Is your shift knob inside you? 😳 jk but how's it holding up so far 3 years later?
Lol. Yes, the mount is still holding up! Thanks for watching!
2:38 why didnt hold the mount and shake it instead of the phone like it would really be. that was unrealistic. actually a good video overall tho
That mount is still holding 6 years later. Thanks for watching.
@@ExtremeDailyDrivers nice. i just got one. so the adhesive is strong enough too? im wondering if it'll walk its way off the mount with the road motion. im thinking the pro mount would be better. wow that was 6 years ago? lol since you responded im subscribe haha ;)
@@justaguy4real I've never used the Pro Mount so I can't say, but if you follow how I installed the mount in the video and you don't mount it in a position where the mount will be fighting gravity it should be solid for years. Thanks for subscribing!
@@ExtremeDailyDrivers so its still holding strong, or have you replaced it by now? and did you leave the metal plate on inside of case, or relocate it? seems the metal to metal is a much stronger hold. I'm looking at the magicmount pro with the 6 magnets as well. phones today are a bit bigger and heavier than iphones 6 years ago. what do you have now?
This doesn't work through an Otter box case It's not strong enough
Then get rid of the Otter Box. Lol
@@ExtremeDailyDrivers NO! I just put the large magnet between the rubber piece and plastic piece of the Otter Box case. It doesn't exactly stay in place on its own because it doesn't want to stick to the rubber but carefully put the two pieces of the case together and that hold it in place. Then I put the smaller one on the outside of the plastic piece directly on the back of the phone case giving it two magnets and that seems to be working okay.
1:08 I mean, you coulda just used a box cutter
On a clam shell? I would have to rename the video, "Quickest Way To See The Inside of an Ambulance!"
you don’t need to look at your screen as you drive my friend. you are simply a statistic
Fair point.
Good video but the intro made my ears bleed
did you just put a sticker on a sticker? w....
The sticker you install before the metal backing piece is removable. So you can remove the backing piece with leaving sticky residue all over your phone. I hope that helps. Thanks for watching!
Better to put mount on dash first and check call size to make adjustments. Also that shield you pull off didn't stick to the cell and came off so my fingers totally contaminated both sides. Hate the instructions so poorly written and had to get a magnifying glass to even read it!!! Sucks, all the way around.
I never had an issue. I used it for years. Thanks for watching.
Omg should have watched all this instead of doing it along with....messed up 😢
Wtf we both have a Scion lol... not xB tho
And that's why you are watching a cellphone mount video and not a video on "How to Replace Your Transmission"😆
😆🤣 maaaannn I had to use a chainsaw to get this thing open....but yeah I got the windshield mount...much easier 🤷🏽♂️
Let me know how it works! Thanks for watching!
Jesus Christ loves you 🥺
You’re a really handsome guy
Thank you, Flora!
Thank You
Magnet doesn’t seem strong enough to hold my phone in place. Disappointing product.
I don't know what kind of phone you have, but this thing holds like a glue. It's still holding all of my phones all these years later.
@@ExtremeDailyDrivers It’s an iPhone 11. I think it’s just not compatible with Otterboxes. Or at least, I might have to mount the magnet on the outside of my case, which I was hoping to avoid.
I would ditch the Otterbox. It's like surrounding a Ferrari with a bunch of tires. If you must keep it, yeah, you need to have the magnet on the outside.