Rottweiler SOLERA Quick Change Air Intake Complete Installation | 2014 to 2020 KTM 1190 1090 1290
Vložit
- čas přidán 20. 04. 2024
- Watch the installation of the NEW Rottweiler SOLERA Quick Change Air Intake on a 2016 KTM 1190 (same for the 1090 & 1290 up to 2020) Intro shows the need for this kit followed by the disassembly of my 2016 KTM 1190 Adv R followed by the installation of the yet to be released SOLERA Quick Change Air Intake from Rottweiler. This kit will fit the 2014 to 2020 KTM ADVENTURE Motorcycles 1050 cc - 1290 cc This is a FIRST LOOK INSTALLATION of a prototype kit and the final production model may be different than this installation. According to my sources, this kit should be available soon at rottweilerperformance.com I have been using the kit daily for over a month and LOVE it! NOTE: I am not a mechanic and this installation was done without instructions.
Amazing Ratchet! amzn.to/4aL7qze
Favorite Torx Bits: amzn.to/4cZaPMq
Check out my website! www.Manybikes.biz for Motoz, Mitas, WildAss and Seal Savers!
Shop my Rocky Mountain Affiliate Link Here:
www.rockymountainatvmc.com/?r...
Shop my Amazon Affiliate Link Here: amzn.to/3ZOvgFE
Use Coupon Code MANYBIKES to Save 25% at www.NelsonRigg.com
Thank you so much for watching! If you'd like to help support the channel, please checkout my Patreon: / manybikes
One time donations are accepted at PayPal.me/BradshawFamily
If you would like to send a product for me to review, please email me:
manybikes@gmail.com
Thank you!
Kyle
Follow me @Manybikes
Manybikes - Auta a dopravní prostředky
Those Mitas tires look awesome on that bike. I have the Rottweiler intake and filter. I always looked at it and wondered why it couldn't just slide out without removing the tank. I don't have to think about that no more. I guess it's time to shake my penny bank.
This air kit is a game changer for sure. 50k miles in, I can assure you I'd have checked the air filter and cleaned / replaced it WAY More Often if I had this! "Sorry 1190... I
Do love you :)"
How I wish I had this a few years back.
I’m almost a pro now getting that tank off, this will definitely makes things much easier.
Way Way easier!
Great product 👌 can't wait for them to come out
Such a great design. Makes me wonder why the OEM's make it so difficult!
Thas a great gear. I remember how to change or clean this filter is not fun. When I change for gs 1200, change the filter is very and other game , more easy.
Yeah, trade offs ;)
the difficult maintanance issues are the primary reason I did not get a 1290, makes me wish this came out earlier.
Yeah. I used to only check it when I do my oil changes. Now, I'll check and clean after every dirty ride!
As the guy with the map and or mostly solo I rarely ate dust but this with be added to my 8 year old 1190 lickety-split.
Ha! Ha! Yeah, I have eaten a far amount of your dust... Can't wait for our meet-up at the Buffalo Chip for some South Dakota Off Road Riding!
My only concern is does it seal properly around the base in the long run and I don't like that it sucks hot air in. Great idea though. I have Powercell Pods with snorkel prefilters in mine.
It is accepting all of the cool air from the front of the bike (way more than stock) when moving so I don't see that as an issue. It seems to have a solid seal all the way around. It has been on the bike for a month now. I need to pull it out and look at the foam around the base. Are there any areas that look "less squished" than others. It feet good during the installation though. We shall see.
Is there any downward pressure pulling it down ? i can see it slots into a dowel at the end and the thumb screw end seams to just latch across ? surly the magnet cannot be that strong holding it down ? i dont understand how it wont just suck air in around the bottom when it sits on the base plate ?
There are ridges and the filter material is about 1/2 thick all around the base plate. The magnet is pretty strong... that locates it and then there is pressure that is needed to push down so the flipper latch at the end can engage. I'll pull it off so you can see the Indention in the foam / the amount of seal it has.
@manybikes epically under hard throttle when it's breathing deep, I can't help but think it would suck dirt around the bottom..
I wonder how this would compare to the PowerCell pods and pre-filters in the snorkels that I run now? The pre-filters are super easy but I have yet to check the main… coming due for a valve check in a few thousand miles and will check it then. This is a super clean design by Rotty though. Any idea on pricing?
Pricing should be available in the next couple weeks. Just chatted wiht them today and it will be called SOLERA Quick Change Intake System. SOL meaning doable solo or alone and ERA as in new Era of possibilities. Pretty rad. It's coming soon!
@@manybikes thanks for the tip!
I'm not looking to this one because i have the old version 😂
Yeah, an upgrade on top of an upgrade does not make much sense ... unless you are looking to save time. At least an hour saved every time you want to check or change your air filter. Whew!!!
Hopefully this will be compatible with the Rottweiler velocity stacks? (TVS80)
The velocity stacks are built into this unit. the baseplate bolts to the intake and the velocity stacks are built in to the air filter cage. Pretty neat set-up.
When is it coming out?
Just talked with them today! Check it out: ETA UPDATE! SOLERA Quick Change Kit @RottweilerPerformance KTM 1090 1190 1290 #youtubeshorts #adv
czcams.com/users/shortszKROKpJlLIQ?feature=share
Thanks Kyle!
Yes Sir!
Have mercy they want $650.00 USD for this!!??!! I was expecting more like $350.00 tops!
Yeah, it is a bit higher than I would have expected, BUT... the time and $$ it saves will quickly pay for the unit. Filter checks / cleanings are so easy! Being an 1190 guy since 2017 I think the $650 is worth every penny! 2 minute filter swap vs. a 2 hour filter swap. GOLD.