Am I the only one seeing the holes in front of the fans, cause that's just fix the airflow problem (not actually the plastic will probably melt if pushed too far)
Plastic doesn’t smelt as fast as some people think, at my job we make cables and those plastics need anywhere between 180-200C to smelt. A pc will turn off around 100 or so
There are more wholes in it. The fans have holes front of them. Also depending. PCs can run pretty well at 90C to 100C. Some games would probably crash at high settings but it would work fine. I had a old prebuild that I upgraded on my channel that runs at 98C fine. It ran for hours, I even mined on it. The only thing is its loud and it kept the room warm.
the pc case is mostly to protect from dust and being able to move it easily. and protects from physical damage. like if you fell on it the case would protect.
I have a giant PC case from 2003 that I have modified. Bought my first pc in that case that had a phenom 2 and a 750ti with ddr2. Now has a 3090 and 5950x. There is no side panel because the 3090 is too wide for it to still get air flow, and 3 of the 6 hard drive bays have been skillfully removed because 3090 suprim x is a long boi.
The worst part is how a cutout for the GPU fan and another for an exhaust fan would make this one of the best DIY cases. But they just didn't do these.
I used to have a pc with 2 graphics cards but I didn't use a case, just kept the motherboard on the box it came with and the power supply right next to it
That pc is begging for airflow
Bros blinder then me have you seen the holes... I like tight holes
@@SurprisedMp3Player-dv7ocwtf do you mean I like tight holes?😭
W pfp
@@SurprisedMp3Player-dv7ocyeah but those holes are so small it ain't even gonna mean anything
if u move ur gay
We’d be gasping for air if you did the thug shake
💀😭
You need therapy immediately...
wtf
😩😩😩
Ok this is the best one yet
If you look closely, the jug has holes for the fans to have some airflow
The holes aren’t in front of the blades tho it’s in front of the flat center piece
They are on the fans... @@thingsnstuff6029
Take another look
@@thingsnstuff6029there's multiple holes
@@thingsnstuff6029they were
maybe if you did the thug shake then it would get better airflow
Ohhh yes
Stop it. Get some help
@@thatfadedguitarist4418 it's a joke. Calm down
@@thatfadedguitarist4418 the only help i need is carter doing the thug shake
@@thatfadedguitarist4418 imma be honest i dont even understand the joke but i saw an opportunity and i took it 🗣️🗣️🗣️🔥🔥🔥🦅🦅🦅🦅
You dont need a pc case but the dust and dead mosquitoes would be crazy.
Exactly
Dead mosquitos on a PC? Bro, where are you?
@@UltraCenterHQHave you just… never opened it?
@@DanialDEcool dawg, just dead mosquitos everywhere in your room just seems weird
The PC begging for that *Thug shake*
I am too tbh 😔
He put holes in it so it’s good 👍
Am I the only one seeing the holes in front of the fans, cause that's just fix the airflow problem (not actually the plastic will probably melt if pushed too far)
I don’t think it’ll melt (yet) just from the PC running
But it’ll warp to a point that it gets hot enough real quick
The heat and lack of airflow will melt the plastic
Probably not, the air wouldn’t get much hotter than 80 degrees before the PC starts thermal throttling or crashing
Yes but lack of circulation retains the heat
Making the plastic weaker over time
Plastic doesn’t smelt as fast as some people think, at my job we make cables and those plastics need anywhere between 180-200C to smelt. A pc will turn off around 100 or so
Yes but this is not cable plastic which needs to handle heat
broa got that o'hare pc ☠☠☠
There are holes in front of the fans, So it will probably run but with a very high temp(the holes probably won't help that much lol😂)
Carter might be onto something without needing a PC case...
Damnnnnn
nah, its better to have _a_ pc case than none.
The only reason that pc didnt implode is because thats a chug jug
We are grasping for you to do the thug shake
there are openings at the fans, you just need to look 😂
Another good one is to build a Lego case. It has a lot of good things about it, like how you can build it to fit your pc and easily open it up.
We creating a vacuum with this one 🗣️🗣️🗣️🔥🔥🔥🔥
It needs a sleeer build.
The trick is that it runs on hopes and dreams
That doesn’t have any airflow obviously 🙄 because it’s filled with water 🤦
This new water cooling feature is crazy 💀💀💀
There’s holes cut out of it
Still cool as hell tho…🔥🔥🔥
him: no pc case
me: yay! time to electric shock myself.
2 GPUs, one computer. It does look intense, but- only one motherboard.
If you don’t have a pc but you have a desk you could go for the coolest budget build of the invisible desk mounted setup
My old Bitcoin miner was a milk crate. That thing rocked
Hear me out....mineral oil PC in a water jug
video 141 of asking carter to do the thug shake
That fan has air holes in front of it...
A PC in a 5 liter bottle before GTA 6
It’s kinda funny to me that a pc case is essentially a like $50+ power button usually
The crates wild
my pc is running without a case until i can afford one
I actually has holes near the fan to give it masterful airflow. So it's decent overall
There are more wholes in it. The fans have holes front of them. Also depending. PCs can run pretty well at 90C to 100C. Some games would probably crash at high settings but it would work fine. I had a old prebuild that I upgraded on my channel that runs at 98C fine. It ran for hours, I even mined on it. The only thing is its loud and it kept the room warm.
I mean it’s like saying you don’t need running shoes for running, but they help A LOT.
Air flow? It's begging for a Ground. 😂
It still has cooper and thermal paste connected to the heat sink. Its gonna run real hot.
Alienware pc be like
This is a revolutionary design
best case is still simply put in on the box it came in ^^
That ain't a sleeper, that's a whole ass bed
tip: make sure to use a case otherwise youll need to clean your fans of dust every week as opposed to once every few months
“O’hare air” ahh pc
If you have a screw driver… you can turn on the pc by hitting the 2 pins with it, which in turn makes pc case obsolete
Bro: go drink some water
Me:ok
Wait a damn minute… you don’t need a case? DAMN
Who needs airflow when you have stagnant water? 😂
Does he not see the massive holes in front of all the fans? I mean they might not be the best airflow but its definitely enough to run.
Looks like there might be some air holes in front of the fans so it could work in my opinion
Half of my pc is in a case but the other half is zip tied to the outside lol
A nice option is wall mounted onto a board
Somehow 10x more airflow than any Alienware desktop
There’s literally a whole cut in the middle of that fan that he said had no air to it
are we not gonna talk abt how he even got the parts IN there
What would a pc without a case look like
Like a pc
At least it’s watercooled.
Did you know the sky is gray?
I’m begging for airflow thinking about carter doing the thug shake 🫠
We dont need a pc case we need a carter thug shake 😫
I think the cap is a fan 😂
The gun shop near me uses a Spanish ammo crate with holes cut out of it just for ventilation. It’s pretty cool.
Algorithm forcing old Carter videos ❌
CarterPCs forcing old Carter videos ✅
That pc will get air if you do the thug shake 🙏
"you don't need a pc case" Brother that thing would be dead very quickly
You don’t need a case, if you’re careful.
With most mobo manufacturers including a way to turn the box into a test bench i say the days of the case are numbered
Ummm…it’s obviously water cooled💀💀
for a sec i thought it was in oil
the pc case is mostly to protect from dust and being able to move it easily. and protects from physical damage. like if you fell on it the case would protect.
Tell Nathan to hit the thugshake
There are holes in the tank u can see it...
Wit why is the crate lowkey a good idea
"You don't need a pc case"
That's what i always say
I have a giant PC case from 2003 that I have modified. Bought my first pc in that case that had a phenom 2 and a 750ti with ddr2. Now has a 3090 and 5950x. There is no side panel because the 3090 is too wide for it to still get air flow, and 3 of the 6 hard drive bays have been skillfully removed because 3090 suprim x is a long boi.
na we need someone to do the milk crate pc build now... but it has to be a free one you find on the freeway
Gaming setup from subnautica 💀
The dust though 😅
Raw doggin a pc is crazy
imagine getting hyper thermally electrocuted just because carterpcs told you not to use a case
Bro is quite literally bottlenecking
Carterpcs is talking about pcs is rare
Make it water cooled
That PC struggling to breathe bro 💀😭
If a PC case isn't in your budget don't use one. Get a mounting plate, make a testbench setup.
"grate airflow"
The big jug literally had holes where the fans are
my girlfriend got confused as to why i’m paying so much for a good case and she told me “just don’t get a case”
World's first pc with asthma
carter should go inside it and do the thug shake so it gets air
I just saw the first fan you pointed at had 3 holes
The worst part is how a cutout for the GPU fan and another for an exhaust fan would make this one of the best DIY cases. But they just didn't do these.
Carter pc making actual pc content
My friends dad has his built into his desk it’s badass
I used to have a pc with 2 graphics cards but I didn't use a case, just kept the motherboard on the box it came with and the power supply right next to it
F*ck it, mother board on da ceiling😎🗣️
You kinda need one if you plan to use a heavy graphics card
Its easy to fix and a jug pc is a cool ass idea
Top of the motherboard box always works great
Atleast the explosion won't be big😅